Find an experienced builder in Port Melbourne

Remove a tree from the drive way of propety - Due date: Needs to be done on Wednesday, 17 January 2024

Over 20,000m2 + of wrap to be installed to metal frame at a big construction site. Must have PPE, white card, car, general knowledge. Will provide material and fastening tools. Training provided, ongoing work for the right candidate. Daily task is to reach 300m2 - Due date: Before Monday, 15 January 2024

Bunnings shed model 379934. To be installed on level paving ground. Dimention 5.2mX1.5m. See pics shed to go along the fence - Due date: Flexible

Licensed Drafter required to produce before and after drawings of the opening of a wall. These will add to my structural engineers calculations and build specification to forwards to a surveyer for a permit.

You will need to buy (from Bunnings) and install stainless steel tension wire onto existing pergola for our passion fruit vines to climb over. BYO extra high 'A' frame ladder. - Due date: Flexible

Bricklayer or builder wanted to fill hole in the external wall from where a heating system was removed and to add additional pavers. 700mm wide, 500mm from top of whole to ground, 350mm from top of whole to paver. The pipes are central heating pipes from the boiler located above the hole so these need to stay. Would consider either bricking up the hole or covering it with lattice (as in the last photo.) - Due date: Flexible

The ivy needs to be trimmed back and removed on a solid wall, on both sides of a brush fence (approx 3 m long) and on a pergola . Ladder is available but only required although on the pergola. - Due date: Flexible

Hi I need you to purchase and add sand for 2 standing patio heaters, and purchase and apply wood sealant to by new patio table and 4 chairs. - Due date: Flexible

Build Absco Reverse Skillion Shed, might need 2 people to do it. 1.5m wide, 1.8m high, 0.8m deep. Have a ladder on site. Shed is already on site. - Due date: Flexible

Hi There, I require someone to fix paving in driveway and seal in between. - Due date: Flexible

I’m looking for a tradie to build a basic pergola on the side of my house including flat roofing No decking needed, just posts and roof.(Hardwood) Size is 1.9m wide by 6.5m long 2.2m high

Our company is looking for a registered builder that we can use regularly for assorted tasks. At the moment we need someone to install a double glaze window approx 150cm x 50cm. We also need someone who can tear down/build rooms - Due date: Flexible

I’m looking for a tradie to build a basic pergola on the side of my house including flat roofing No decking needed, just posts and roof. Size is 1.9m wide by 6.5m long 2.2m high

Pergola timber needs demolishing and removal - Due date: Flexible

Global Blinds in Port Melbourne is looking for a professional to install our pergolas, Veranda Blinds, Zipscreens and Aluminium venetians for our business. It is not a full time position so you would be able to continue your own works. If interested please call Robyn 9314 0302

Build a brick front fence and render. Property is 7 metres wide, 4 pillars to 170 cm. Base to 35 cm.

Structural steel pergola currently has wire reo mesh cover. The middle section of approx 3x3m needs to be waterproofed/provide protection from the sun/rain. I haven't yet purchased the laser light but looking at the uncorragated profile with good solar protection rating - Due date: Before Saturday, 30 April 2022

Quote only needed first, for parts and labour Flat roof Pergola in hardwood timber 1.9m wide 7.2mlong 2.5m high Location 10 mins from cbd

Quote on building Pergola in back yard 2m x 6m

Pergola size 5850×7330 We need a strong and handy man to help taking this pergola apart nicely so we can resemble it back at another location. Experience in removing a pergola or similar structure is highly regarded. My husband who is quite handy will work alongside you from start to finish. It would be handy if you have your own impact driver, saw and tall ladder, but not essential. It will be a day's job