Find an experienced plumber in Chapel Hill QLD

Install one new weatherproof GPO for rainwater tank. There are existing GPOs in the patio if it helps.

Budget is guide only, please provide your quote and availability TASK Install my slimline rainwater tank on the existing concrete slab near the stairs. Replace 2 metal downpipes and connect both to the tank with leaf screen + first-flush diverter. Run tank overflow to the new Everhard stormwater pit beside the slab. Install my Davey SJ35-04PC pump with inline Y-strainer and create a hose outlet for garden and path washing. SPECS Check slab is level enough for tank; pack/adjust if needed. Remove 2 old metal downpipes; fit new 90–100 mm PVC/Colorbond downpipes with brackets, sealed joints, then paint to colour I supply. Plumb both downpipes to tank inlet through first-flush diverter and leaf screen (mosquito proof). Connect tank overflow via 90–100 mm pipe to the stormwater pit. Fit ball valve on tank outlet, then my inline Y-strainer, then suction line to my Davey SJ35-04PC mounted beside the tank. From pump outlet, run pipe to a new hose tap near the slab. Test system, check for leaks, confirm pump auto start/stop works. I PROVIDE Slimline tank (on site). Existing concrete slab base. Davey SJ35-04PC pump. Inline Y-strainer filter. Paint/colour for downpipes. YOU PROVIDE New downpipes, first-flush diverter, leaf screen, overflow pipe, ball valve and all fittings. Pipework from tank to pump and pump to hose tap, hose tap, mounting hardware. All tools, sealants and fixings. Licensed plumber / roofer / drainer with insurance and rainwater tank experience.

Check Rainwater pump , Check shower head Replace outdoor taps suitable for timer Check shower drain cover Shower door strip seal . Check patio Exterior roof leak and rusting Check all household

Replacing existing, scratched fittings with new ones of the same type - 1 Rain Shower head and arm - 1 Shower mixer - 2 Basin Mixers and taps - 1 Bath Mixer and tap I will be supplying the fittings.

Nordic Treadmill, 5 year old, need services and repair broken buttons

Install Bidet to a toilet. just 1 . new connection Not sure how much it will cost so I am just putting 50 for now.

Hi, This whole house water filter system is from "My Water Filter" company. I need someone to install them with a pressure reduced (has to be under 5 or 5.5kpa I believe. Last time someone installed them charged me under $500 for the job. Since its hard to estimate cost - Just bid for $5 - I can atleast lock in someone to come visit the house & give me a proper quote.

I need to change the tap and Accessories for three basins in bathrooms. The price of tap and Accessories will be separated.

I have a circulation pump that connect hot water system and solar panel, the pump is running all the time (24 hours). I would like to have it only running when there is sunlight. I also would like to replace the mixer in my bathroom basin that currently leaking from the arm.

Remove old toilet and Install new toilet provided.

Looking for a plumber to replace an outdoor tap

I have purchased a tap and would like to change the current one in the kitchen.

Replace existing kitchen mixer tab with a new one. New tab is the one in this link https://www.reece.com.au/search?query=2265801

We are seeking a licensed plumber to address a water leak issue from underneath a toilet. The situation is currently manageable, so we're flexible with scheduling. If you are available to assist at your earliest convenience, please get in touch. Thank you for your attention.

Change the tap in kitchen and bathroom

Bosch Serie 6 Freestanding Dishwasher 5 years old Displays E24 error message and no water goes in. Have tried to fix it myself by getting most water out and cleaned the filters but the problem persists.

Water leaking into bowl which seems from the outlet in the cistern.

I have a new laundry that I need to connect the sink to the down pipe that is a bit further and needs to go behind a washing machine and thus needs to be a flexible pipe. The distance is around 110mm.

The tap for cold water is leaking after disconnected it from the washing machine. Even after fully close it is still leaking water.

Remove old insinkerator, supply and install trap, double bulk etc and connect to existing pipe work . Must be licensed. Must provide invoice