Find an experienced plumber in Taringa

I have a Dux Proflo electric hot water system and it has stopped heating water. The tank is completely cold and there is no sound coming from it. The water pressure is perfectly fine, so there are no plumbing/flow issues. I have already done some basic troubleshooting safely: Checked the main switchboard. The dedicated hot water circuit breaker was NOT tripped. I cycled it off and on anyway, and it did not trip (no short circuit). Turned off the power, opened the bottom panel, and checked the Robertshaw thermostat. The red over-temperature reset button has NOT popped out. I tried pushing it just in case, but it is firmly set and hasn't tripped. Based on this, it is likely an open circuit—most probably a blown 2.4 kW heating element or a faulty thermostat. I need a licensed electrician or plumber to come with a multimeter to confirm the fault, and ideally have a spare 2.4 kW element and/or Robertshaw thermostat on hand to replace the faulty part on the spot. Location is in Taringa. Easy access to the unit. Thanks, John

The hot water system keeps tripping the circuit breaker. Location chapel Hill 4069

10 do plumbing work Rough in and fit off

I stall and hook up bathroom ensuite

Install and hook up new plumbing for bathroom ensuite All rough in work completed

No hot water coming out the tap at tap and shower head. The hot water heater wall was warm. Also Tried to reset, no hot water coming out either. Need a service on the hot water system. Looking for getting a quote on fixing this.

We have bought a new hand held shower nozzle kit , and successfully screwed in the new shower head . We have not managed to swap out the old plastic bracket for the shiny new one - that is the task to be done. The new metal cover for the water pipe is a different shape to the old one… may need to buy the correct part to fully compete the job

Bathroom shower heard is leaking.

I need an experienced handyman to replace a leaking tap at my property as soon as possible. The existing tap is leaking and needs to be fully removed and replaced with a new tap. Scope of work includes: Supplying a suitable replacement tap Removing the existing tap Installing the new tap Ensuring all connections are properly sealed Testing to confirm there are no leaks Cleaning up the work area after completion Important Requirements: All tools must be supplied by the Tasker The replacement tap and any required fittings must be supplied by the Tasker All materials and labour must be included in your total quote Additional Information: Please confirm your availability Looking to have this completed as soon as possible.

Hi. The toilet has very low water pressure when flushing. Additionally, the tap is leaking and will need to be repaired or replaced.

There is a strong odour coming from the shower cubicle drain only. The smell is persistent and noticeable even when the shower is not in use. Looking for someone to clean the drain and eliminate the smell (hair buildup, trap cleaning, or drain treatment). Need the issue resolved properly so the odour does not return

My bathroom drains smell kind of funny. Would like a plumber to come and clean them. 2 Bathrooms. Cheers,

My shower water tap cannot be turned off

Need water connection to dish washer and drain to check next to drainage. Water line just behind sink, exposed no drilling or breking required.

Fix/replace loose toilet seat

“Hi, I’ve noticed the toilet has very low water pressure when flushing. Could someone please take a look and fix it?

Our fridge needs to be plumbed in, There is easy access to the underside of the floor. I have the piping and filter, but would need a T valve or something like that to attach to the water supply from the sink.

Plumb in water cooler to the main

-Fit new shower sets x 2 with fittings already in wall. -Fit under sink plumbing in vanity drawer. -reconnect electric hot water tank.

I need to replace a gas storage hot water system with a new system. Property is a 4 bedroom house with 2 bathroom. Existing system is located outdoors and replacement to be located at the same place. Looking at a 26L gas continuous flow system as a possible replacement but open to any cheaper alternatives. Price is priority.