Find an experienced handyman in Thornleigh

My front open brick insert letterbox was hit by a reversing car and has detached from cavity. The stainless steel opening front needs to be fixed (internal flap hinge has broken) and reattached to stone mount cavity. If you had a small dollop of standard mortar to fix the small pieces of the stone base that have cracked that would be perfect

Planning to upgrade my existing garden shed.. around 3x6m. Already have concrete slab.. planning to buy from Bunnings or other supplier but need someone to install it

Repair cracks on gyprock wall.

Remove existing ceiling fan (I will dispose of it) Install new ceiling fan (I will supply it)

Drain Leak- There is a leak under kitchen sink that needs to be fixed. Please see picture. To be done this week before 10th August in Thornleigh- NSW2120. Timing will need to be coordinated. Thanks.

the toilet seat holding was loose and broken, need supply and install the holding clips and screws

Weather seal has come away on most of the door and the door handle mechanism is not working. Handle is very loose

Need an experienced carpenter/builder to remove an existing external door and permanently infill the opening with a fixed glazed panel in a double-brick house. Scope of work: • Remove existing door, frame and associated hardware. • Supply and install a fixed glazed panel (half-height glass panel, not an opening window). • Make good the surrounding structure and ensure the installation is weatherproof. • External finish to be fibre cement sheeting, ready for painting (painting by owner). • Internal finish to be plasterboard/plaster, set and sanded ready for painting (painting by owner). • All work to be completed to a professional standard and suitable for external conditions. Additional information: • Property is a double-brick house. • Happy for the tradesperson to supply materials, or I can provide materials if preferred. • Please include details of your experience with similar work and whether you will supply materials in your quote. Photos attached. Budget is just to put a number, don't consider this a hard number.

Install door lock. Drill hole and install lock. Refer to photos

Install a curtain rod above sliding doors, length is about 370cm, drilling will require going into bricks.

Recently installed a studio that shares a wall with my main residence. I would like to reduce noise travel between the wall as much as possible. Wall is approximately 3m x 2.4m and has an internet and electrical socket.

Combined light/ceiling fan was installed with no wall control, only remote control. Fan has begun randomly turning on. To avoid a potential electrical fault associated with this "always live" state, I want you to connect up a wall-mounted controller (Off L M H). This could be run with the light switch, but access is tight, so a separate cable down the cavity wall is acceptable.

I need the installation of 3 chandeliers, 2 pendant lights and 2 fans. These are new installations and not replacements. I have double storey house. The installation is required on the ground floor. Images of the products to be installed are attached.

I need the internal door handles replaced for 4 room doors, and 1 bathroom door. I have an older house and want to update them. The cavity for the door handles and locking mechanism are a different shape (see photos). If you’ve got any questions, shoot me a message.

Awning around 5 meters length to be installed . It is remote one. So I want installation and setup to be done. Looking for someone to come assess the place and install neatly. Not sure about the budget. Pls quote a price and I will get back.

We have a large window and the frame is rotting in one corner. We won’t want to replace the glass, it seems fine. It we do want the frame to be completely checked and repaired.

Old ceiling fans needs to be replaced with new DC fan in bedrooms. Total 3. I have bought the fans.

Need fly screen put back into Window Sill + Window lock purchased and installed.

Help me design a flynet for this small awning window while keeping the inside handle accessible so I can open and close it easily. The first two photos show the actual window, and the last photo shows another window in the house with the setup I want to replicate. I believe most of the required materials can be purchased from Bunnings. Please advise on the best approach to install it.

Hi, I need a skilled handyman or carpenter to help install a small outdoor awning/storage roof at my property. Scope of Work: Install treated pine frame against a brick wall (approx. 5m long) Fix 3 vertical posts using angle brackets (already planned location) Mount polycarbonate corrugated roofing sheets (2.4m length, total 6 sheets) Ensure proper slope and alignment Apply waterproof silicone where necessary All materials can be supplied by me (or you can supply—please advise) Dimensions: Length: approx. 5m Depth: approx. 2m Simple single-slope design (as shown in photo)