Find a professional gate installation in Inner South Melbourne

The front gates of our driveway are not closing properly. One does not close as it should and so it is sticking out into the driveway. When it does close it closes before not after the other gate and so I need to use the manual override to get the gates open.

Automatic gate isn’t locking upon closure. You can push it open at all times. Doesn’t seem to be catching the stopper. Please note this is an automatic gate so a code is entered to open it.

Provide automatic gate and installation and manage all the bins. Size 4.5 m length and 1.5 heigjt

Automatic slider gate kit installation

I currently have a substandard Solar auto gate system installed on double swing gates. I want to replace the entire system with a 24v system including keypad and remote automation. The gates are only 2 years old, this is automation install only…. I can supply the kit, suggested price is for kit installation. Open to contractor who has a supply and fit price

I have solar powered automatic gates and I want to install a Remootio3 to enable wifi operation. Please only respond if you have experience with both Remootio and Solar powered gates

One side of a duplex townhouse, would like to install a sliding automatic vehicle gate (marked blue), at maximum possible height 1.5 metres, and a pedestrian gate (red) and optional extension of the middle fence (green). Would like to get an estimate. Total length at the front is around 7.8 metres. Attached is the photo how I want the gate to be. Thanks.

Our automatic gates do not always stop at the optimal point when opening, especially in winter—perhaps due to the effect of the cold. We believe they need recalibration. Photos of the model are attached.

Automatic gate not shutting as damage sensor. Also manual release so can close. - Due date: Needs to be done on Sunday, 31 December 2023

have a electric sliding gate, problem occurs when temperature warms up the gate jams and wont slide, when temp cools down works again appears that the heat is expanding the track Need someone expert in adjusting the tracks and understands the systems - Due date: Flexible

Pair swing gates matching existing gates. Approximate opening: H 1800 x W 3800 - Due date: Flexible

I need automatic double swing arm system installed on a pre existing gate. I have the material as per the picture attached. The arms to be installed into bricks as per attached photo and picket gates also attached. Thank you - Due date: Flexible

I have an existing swinging GiBiDi automatic gate (at least 5 years old), it hit an object whilst opening and now the left one will not open. When dismantling to see what the issue is, one of the struts has been damaged. - Due date: Flexible

I had a slight accident with my automatic gate. Now when opening, only one side swings open. However, both sides swings shut! Hoping someone that knows how mechanical parts in an automatic gate works can take a look at it and get it fixed? Not sure what to price this task at, so if you can do it, please quote me. - Due date: Flexible

I need a qualified person that can sync my automatic gate with my Neoslider 800 motor and key pad. The original mother board died and I have a new one. The gate needs to open partially for pedestrian access and fully for parking. I also have about five remotes that also need to be programmed. I am reasonably flexible with time to fit in with the person able to perform this task. Thanks in advance. Graeme. - Due date: Flexible

Hi Guys, The automatic gate cannot close properly and always has a certain angle of tilt. However, the electric gate can still operate normally, and the remote control also works. Thanks, Xavier - Due date: Flexible

double swing gate stopped working. The gate opens and shuts constantly when I press the remote button. The board had a bit of smoking coming out of it before it stopped working. - Due date: Flexible

Repair automatic gate. It closed itself beciz of the wind. We could not open it so manually got it opened. - Due date: Flexible

Install a new gate motor on existing automatic gate which has come off. - Due date: Flexible

Someone drove into my automatic sliding gate and knocked the casters off as well as the stop sensor magnet. One section of the drive strip is bent and needs to be straightened or replaced. - Due date: Flexible

Repair 1 x timber gate Rehang 1 x internal timber door Fix sliding cavity door that is alittle stuck Details below Timber gate broken refer photos. Remove temp metal brackets and fix repair property Hang timber door. Note that the frame has damage so need to be repaired properly with new hinges (and fixings to go deep into frame, not little screws) Cavity slider needs adjustment - getting stuck when opening

Scope: 1. Fix / straighten existing gate to wall with screws. Not replacing gate. Excluded: painting, excluded.

Would you please make a timber gate door like child safety gate, and instal it? I'll discuss details inperson. - Due date: Before Sunday, 19 November 2023

We have 2old timber gates that need replacing - Due date: Flexible

Gate not closing needs hinge moved

Timber gate has broken boards on bottom half that need replacing. Gate also needs adjusting as it is not closing easily. This is quite urgent and needs to be repaired ASAP.