Find a professional gate installation in Sandringham VIC

The front door gate has not worked since we moved in and it looks like it needs a new pair of handles and locks and a new spindle (I tried a new one, but it did not fit and also the lock has incorrect screws and is loose inside). The dimensions are shown for the fitting in the photos so a new handle and lock could be sourced and replaced. Ian

Hi there, our Eyevision outdoor front gate intercom and also the internal screen inside our house both lost power suddenly. The sliding gate motor for cars still works via remote, so main power is functioning. Probably transformer or fuse inside the control box. Photo of that is attached. Please advise if you have such parts handy and when you can come out to replace. Quote includes parts. Thank you.

One side of front gate not returning to closed position. Motor is working but something must be wrong or disconnected with the return mechanism. I have had to disengage the lock/unlock grey lever to open and close that side of the gate.

I need a 3.9M wide double swing gate installed (similar to the picture). Onto brick posts. Needs to be around 1.9m tall in middle section.

As you can see by the photo the gate is in disrepair and either needs re-welding with sections replaced or the whole gate replaced. I need someone available today to meet me on site and give me a price.

A new replacement motor and railings has been installed but having problems programming it and the remotes

Gate repair. Electric front gate not opening on one side.

Looking for someone to build a fence and gate on the side of our house. We already have a fence & gate on one side, (see picture), we want the other side to look the same. There is currently a large hedge there which I will remove prior to fence being built, the gap is roughly 280cm. We will do the painting so just need fence installing.

We have a glass pool fence and gate. The gate has dropped and it’s very difficult to close. See photos for more detail. Pics of hinges included too. Screws to hinges have rusted so could these be replaced too please. Only 2 hinges on gate.

External timber gates need to be sanded back and at least 2 coats of exterior black paint to be applied. I will cover the cost of the paint in addition to the task fee.

My front gate latch is loose and even when you lock the gate, you can push it open. I need the latch part fixed.

Install new wooden fence between driveway and neighbours driveway. Renovate wooden gate. Renovate wooden fence

Front gate motor repair. One side of gate not working when power supply still active.

Double external timber gate needs to be relocated approx 2m further along. One post can be reused and re-fixed to house brickwork, the other post is concreted into a footing so a new timber post and new footing is likely needed. Gate lock and drop bolt need to be swapped to the other swinging leaf too.

Repair top hinge on metal gate

Front gate sticks so need the fitting removed, the wood shaved back and sealed and then the fitting re-fitted

8.5 metres x 1.2 metres with pedestrian and vehicle lockable gates to blend in with the existing side fence as per photo.

Gate hinges need welding or replacement

Gate is no longer self closing and has dropped slightly

Existing brick fence to be modified to add a new pedestrian gate (shown in blue). New brick pier to be constructed shown in red. Gate will be supplied for free.