Find a professional fitness equipment installer in NSW

Need someone to istall a Gym power rack. It is all unboxed and ready to go just needs install. Please see link for exact information: https://www.smai.com.au/products/power-rack-core-vanta-series?company_location_changed=true&variant=40967279706174 Instructions are below: Install time for Power Rack plus cable attachment is approx 4 hours Please note, Vanta rack uses 25mm bolts with 38mm head and bolt. Tools are included in the set, however we highly recommend obtaining a 38mm Spanner, 38mm socket and Reversible Ratchet to fit a 38mm socket to speed up installation. MUST HAVE ABOVE TOOLS TO FIT BOLTS

I’ve bought a home gym for my wife’s birthday It’s arrived late and I need someone to put it together so I can suprose her

Home Gym Assembly – Garage Looking for someone experienced to assemble and install a Proflex M8000 Multi-Station Home Gym in my garage. - Full assembly, including cables, pulleys and weight plates - Position and secure the gym in the garage - Ensure everything is assembled safely and working correctly - Please bring your own tools The gym is new and comes with assembly instructions. Please quote your total price and let me know if you have experience assembling similar home gym equipment. https://www.mytopia.com.au/proflex-multi-station-home-gym-set-with-98lbs-weight-plates-m8000?source=Google&device=m&campaign=17741747747&adgroup=&keyword=&matchtype=&placement=&adposition=&location=9071736&gad_source=1&gad_campaignid=17339319289&gbraid=0AAAAADt7R6a-6rvzvinTJpY0JXiCxfle_&gclid=CjwKCAjw_pzWBhAkEiwAwDCi1frUQgTTDCjUdV0aq0iPNF669QfqjaEreG183YN4Rf3Q80_wecjiIRoC4FMQAvD_BwE

I have a multi gym half assembled and need the remaining half put together. + a new leg press/hack squat machine to be assembled.

We require labour onsite to build gym equipment all day 8:30-5 $30 hour - Must have experience building equipment or flat packs and have some tools.

Paint all walls using low emissions paint preferably on a Saturday as we are not using the gym on a Sunday

There's a Cable Crossover machine at a gym in Ulladulla that has a malfunctioning carriage adjuster. The pop pin is not engaging in the carriage adjuster, causing the adjuster to not lock in properly and thus preventing the machine from being used. We need someone to go out there and replace the pop pin inside the carriage adjuster. Afterwards, you would test the machine by adjusting the carriage and operating it for a period of roughly 5 minutes to determine if the machine is now safe to operate or not. This should take approximately 45 minutes to an hour to undertake. If you agree to undertake this task, we will send you the pop pin for installation. We will expect it to be fitted within 2 working days of the pop pin's arrival. We would also request that you wear a black polo shirt when attending the site, as that is a core component of our uniform and you will be acting on our behalf. If you are interested in undertaking this task, please let us know as soon as possible. Thank you.

I have 2x benches from SMAI that need to be set up

Build a Nike squat rack in my studio. Need to ensure it’s safe. See pictures for the boxes and the final full squat rack.

Looking for someone to: - Clean and prepare the garage floor. Lay the provided rubber mats neatly across the garage floor. - Cut and fit mats around the edges if needed. - Lay mats inside the built-in cupboards on the floor/base. - Leave everything clean and neatly finished. Mats will be provided. Addition: We have 2 shoes racks and 1 seating that needs assembled as well and would like to offer an additional 150$ to get them assembled as well. So 350$ for the pressure wash and then 150$ for the assembling the 3 furnitures (2 shoe racks + one she cabinet). Will need the 2 shoe racks mounted to the wall.

Task Description Available 24/7 to complete: Looking for someone experienced with rubber gym flooring to tidy up and properly fit the existing flooring in a storage/training area. The rubber flooring is already onsite, and we also have extra flooring available if required. No flooring supply is needed — labour/service only. Scope of work: * Cut existing/extra rubber flooring to fit the room, walls, columns and edges neatly. * Rearrange and align the rubber tiles/mats so they sit square, tight and flush. * Minimise gaps between flooring sections. * Ensure edges are properly fitted to reduce movement, shifting or separation during use. * Use existing spare flooring to fill the currently exposed sections where possible. * Leave the finished area neat, level and professionally aligned. * Clean up/offcuts after completion.

Assembly of gym equipment. BodyIron(R) Multi Station Home Gym With Leg Press BHG7000 + Power Tower + Ab Bench. Only taskers with experience in gym equipment assembly only for safety reasons. Between 11am - 3:30pm

Need a very skilled person to put this gym set together, too busy to get it done.

Installation of GRK-110 Space Saving Multi Function Rack with 74kg Cable Crossover in garage

Lay 1m x 1m rubber gym mats across a 7m x 7m garage gym. Scope includes: * Lay and align rubber mats * Measure and cut mats neatly around brick piers and fixed cabinets, including wedge/irregular sections * Move gym equipment as required, with help from owner * Ensure a neat, tight finish with minimal gaps Mats supplied. Must have suitable tools for cutting 15mm thick rubber mats.

I need an experienced gym equipment installer to assemble the following in my basement home gym: Verve Tori Functional Trainer Rack (main job). Dual weight stack functional trainer with power rack. Reference: https://www.vervefitness.com.au/products/tori-functional-trainer-power-rack Verve Smith Machine attachment for the rack Verve No Gap Adjustable Bench plus leg attachment Cable attachments fitted and cables tested (lat bar, low row foot plate, lat pulldown seat, handles) 2-tier Olympic plate rack and 2-tier dumbbell rack (small flat-pack jobs, boxes on site now) Site details: Basement location, ground-level access. The the boxes will be located in the room, so there won't be a need to move them. Ceiling height approx 2.35m, confirmed compatible with the rack Concrete floor with rubber tiles. The Tori must be anchored with the supplied dynabolts, so you'll need a hammer drill and masonry bits All boxes on site, unopened Requirements (non-negotiable): You must have assembled a Verve Tori Functional Trainer or an equivalent cable/weight stack functional trainer before. Attach a photo of a previous install with your offer. Offers without a photo will not be considered Own tools including hammer drill Cables routed correctly, weight stacks tested through full range, all bolts torqued, rack anchored and checked for level before sign-off Packaging broken down and stacked for removal Flexible on date. Verve equipment arrives Friday 07/08

Need someone experienced assembling multi-station home gyms. Cross X300 from Southern X Fitness. Base/frame partly assembled, need the rest completed including cables and pulleys. Located in Queanbeyan.

Disassemble the gym for storage

I need someone to finish a gym smith machine installation. The major task left is attaching the pulley and finalizing the whole installation. The manual isn’t the best so the job needs an experience from someone who has done something similar in the past.

Assemble single stack home gym cable machine, including drilling 4 fixing points into masonry wall. Assembly instructions provided. Must have masonry drill.