Find experienced local fencing contractors in Moonee Ponds

We are looking for someone reliable to cut a section of our front brick fence (1400mm). The right side needs to be cut to follow a straight line.

Looking for someone to pick up a gate and some fence pickets and palings.

8.4 colourbond back fence Full height Materials can be supplied if that is easier. If materials are supplied price will have to be adjusted

Rear peoperty full height fence Length 8.4 mtrs

The pine boards are in excellent condition, but four of the hardwood posts which are cemented into the ground have rotted and need replacing.

Laneway fence needs replacing or repaired . Approx 5mtr x 2.4 ht

Hey Airtaskers Looking to have fence toppers installed over two fixed fencing panels and one moving gate for privacy reasons. The lengths measure 1250mm - 900mm - 1110mm (fence - gate - fence). I’ve posted an example image of just a simple slatted fence topper, anything between 500-600mm height will do. I will be painting it later on so no need to worry about that. Hoping to have this done in the next week or so, thanks all in advance!

Having concrete poured on 6 January in my courtyard and require a new metal back gate and fence to replace the old wooden gate and fence. Total length is 2.5 metres and configuration will be fence - gate - fence. The fence height should be 2.2 metres high. Happy with either slat or colorbond in a monument grey colour, with a lock. Ideally, would like this job done before the concrete is poured or on the day of the concrete pour.

Time pine fence Brocken and take away and some tree cuttings

Seeking a new metal back gate and fence to replace the existing wooden one pictured. The existing fence and gate (between the house and the taller fence) will be completely removed due to its poor condition. I have already purchased 4x 2400mm fence posts which will be concreted in to create a standard door width and 2200mm height. The full width of the area is approx. 2500mm. There will be a concrete pour on 3 Jan in the courtyard, and so I would like the new fence and gate to be installed shortly after this. See second image for example found online.

Fence leaning over. Needs to be straightened and secured. Not looking for a fence replacement. 3 posts may need to be replaced, front one is short.

I need a price to remove the old timber gates and supply and install new colour bond gates on existing posts opening is around 1860mm and height 1800mm is fine

I have a 2009 Mitsubishi CJ lancer I am currently sourcing a cheap replacement headlight and right fender/guard The current panel and light are damaged. The panels nearby are also slightly damaged but I was thinking of roughly beating the panels back into functional shape I need help with installing these replacements parts. I may have access to the tools needed but I want some help to make sure things are done properly

fence and fence lattice have fallen

Need to re connect the fence lattice that has fallen

Approx 10-12M timber paling fence, standard height. Retaining wall may be required as some soil has fallen away.

We have a gate that we want replaced with a taller picket gate with lock on the existing frame. Approx 1.8m. The gate width is 73cm. Need someone to supply and install.

1. Remove old timber screening from fence 2. Take rubbish away and tip it 3. Install new timber screening. Attach to the fence using staples and screws. 4. 15m of screen to be installed. In 3m X 1.8m sections 5. Must all be same height above fence line. 6. Supply own tools, staples and screws 7. I will supply screen

Have this bamboo panels with their jute tie things disintegrating and the panels just came off. I was hoping to find someone good with tools to possibly fix them up. Have around 7 panels. :)

Aluminum batten fencing (1.2m height) in between masonry wall and an auto driveway gate. The total width of the house is 13.7m, the width of the walls are expected to be from left to right 0.6m, 2m, 1m, 0.6m and the batten fencing in between. Exact measurements can be flexible.