Find experienced local fencing contractors in Brunswick East

I have an existing fence that needs to be moved approx 1 meter forward. 90% of the materials can be re used and new posts required. Also need to build a screen to match the current fence in another part of the home

Repair a timber fence. Remove 4 old rotten support beams. Supply and install 4 new support beams.

Timber fence has a lean and needs the support beams replaced. Fence is approximately 10m long and 1.7m high. There are 4 support beams that have previously been secured with concrete but have eroded at the base.

Urgent repair needed for back fence damaged by bad weather over the weekend. Fence will need to be a colour bond panel 3180mm wide and 1800mm high with 3 posts to ensure stability. Requires installation of posts standard 600mm deep in ground and concreted for stability. Please provide a quote for materials, labour, and earliest availability. Thanks!

Fence in decent condition but needs a couple of supporting post put in as it is leaning over. (Job updated to include both sides of the fence).

I'd like to replace part of fence on both sides of backyard - 2100mm height, about 2700mm length, times 2.

I have emailed a laneqay fence that needs repairing. It is about 3mtra high and it is bending down a little.

Hi, we need someone to remove 3 wooden posts from our gate, remove the hardware and water hose from the posts, and remove 5 pieces of hardware from the house. I have tried removing these with a power drill and WD40 but haven’t been able to. Thank you for considering!

Metal gate is collapsing because posts are not long enough or deep enough into the ground. Old posts need to be replaced with longer posts. New posts and gate need to be reinstalled into a new concrete footing

We need: - an in-ground clothesline cut from concrete (no disposal required); - a new fold-down clothesline installed in the wooden fence (we have the materials); - a pull-up bar installed in a brick wall (we have the materials).

I have some wooden panels. Cut wooden panels so that it fits the area (there are 4 x panels to make up each fence). There are 2 x sides areas to be fenced. (See photos of one area. The other is on the other side of the balcony and is the same). I would also need you to drill them / affix to the existing metal fence. - Due date: Flexible

Remove section of front fence and gate to make driveway. Build fence and gate at side of house 1.8 height x 2.3 total length using used timber supplied, as per photos. 4 posts (10x10), plinths (1.5x9), old hardwood barndoor style gate, old pine panelling for pickets. Saw timber to required lengths, dig holes, build frame, attach pickets, attach hinges and bolt (supplied) $600 You will need to have your own tools and screws or nails Would like this done soon, before Christmas - Due date: Before Saturday, 17 December 2022

Need to pull down, remove and build a new 1.8m high paling fence approx 9m long. - Due date: Before Tuesday, 22 November 2022

The gate to the community garden was removed and posts removed to allow access. Now needs posts re concreted in and gate repaired. See pics. This is a community garden with limited funds.

My gate is out of alignment and doesn’t close. See photos for details.

Seeking a contractor that can build a gate at the back of a set of townhouses based on architectural designs (have been checked by an engineer). Requires some skill, technical ability and identifying and sourcing all materials. See designs and space in photo. - Due date: Flexible

One panel of colorbond fencing blew off in the storm last week. Frame intact. I’ve got the colorbond sheets too, just need it put back together. Pics available but won’t upload for some reason - Due date: Flexible