Find experienced local carpenters in Sydney Central

Fix kitchen cabinet in the office

Hi, I’m looking for someone experienced in marble/stone benchtop repairs. There are some yellow stains on the marble benchtop, as shown in the attached photo. It appears that the surface protective film/coating may have been stained or discoloured rather than just having normal surface marks. I’m looking for someone who can inspect the benchtop and advise whether: the stained surface layer can be removed, repaired or recoated; or the affected section / entire benchtop needs to be replaced. Ideally, we would prefer to repair or restore the existing benchtop if possible. Please let me know your experience with this type of repair and your estimated cost. Photos are attached for reference.

Qualified Carpenters – Residential Work | Sydney Am building a reliable crew of qualified carpenters for ongoing residential work across Sydney. The Role: Residential carpentry and general building work Various projects across Sydney Work available for carpenters with different levels of experience $50–$60/hr + super, depending on experience and skill level 3-month initial contract Flexible work arrangements Potential for long-term / ongoing work for the right people What We’re Looking For Qualified carpenter / relevant trade qualification Good work ethic and reliability Able to work independently and as part of a crew Quality-focused and professional Own basic tools and transport preferred White Card required If you’re a qualified carpenter looking for consistent residential work with a flexible crew and the opportunity for ongoing work, get in touch with your experience, availability and expected hourly rate.

I need someone handy that can help Stich PVC on a bar (booth) and then stand a PVC board up. The PVC will be pre cut.

Replace the broken timber panel making sure the new one looks good and is safe

2 people required. Cabinetry / handyman experience. Assisting with large scale installation guided by our project managers. 150/hr per person, roughly 8 hours on the Sunday.

Hi, I have one wall in the living room with a water damage stain. The leak source has already been stopped/checked. Need a handyman or painter to: 1. Clean/prep the stain area, 2. Apply a proper stain-blocking primer, 3. Paint the wall with 2 coats of topcoat (I need colour matching). Cash or platform payment. Please give me your best quote. Thanks!

Hi everyone! My partners name is Ethan and is a carpenter looking to take on weekend carpentry jobs across Sydney. Whether it’s an odd job, a small repair or a larger project, he can help out. Services include but not limited to: • Decking & pergolas • Fencing & gates • Doors & locks • Skirting & architraves • Framing • Timber repairs • General maintenance • Flat pack assembly • Renovation carpentry If you need a carpenter or know someone who does, feel free to send a message for a free quote. Thanks for your support!

Hi everyone! My names Ethan and I’m a carpenter looking to take on weekend carpentry jobs across Sydney. Whether it’s an odd job, a small repair or a larger project, I’m keen to help out. Services include but not limited to: • Decking & pergolas • Fencing & gates • Doors & locks • Skirting & architraves • Framing • Timber repairs • General maintenance • Flat pack assembly • Renovation carpentry If you need a carpenter or know someone who does, feel free to send me a message for a free quote. Thanks for your support and look forward to helping with your next project!

I need new angled shelving built into my existing cabinetry to display shoes and some folded polo shirts. I have attached an image of the existing cabinetry, and also an example image of something similar to what I'm thinking in terms of the angled shelves. The shelving needs to match the laminate used for the rest of the cabinetry. It is a glossy black wenge by Polytec: https://www.polytec.com.au/colour/black-wenge/ On the left side where the ties are, I want to get ride of the lowest tie bar, and build 2 angled shelves. On the right side where there are already some flat shelves, I need to build either some angled insertable ramps, or modify existing shelving to be at an angle.

Looking for a couple of roofing carpenters to complete works in Sydney. Potential for ongoing work for the right candidates.

I am looking for someone to create and build a fish tank cabinet. The fish tank is 60x45x45 cm, but the cabinet door must be on the 45 cm side, as the side view is on the 60 cm side. Weighs at 120kg.

Experienced Cabinetmaker / Furniture Restorer Needed – Make Large Solid Wardrobe Fit Apartment I’ve inherited a large, heavy, solid pine wardrobe. It’s a single, non‑flat‑pack piece and, as it stands, it will not fit through a tight internal hallway corner. I need an experienced cabinetmaker, joiner or furniture restoration specialist to design and carry out a professional solution so this wardrobe can be brought into the apartment and used long‑term, without turning it into a “hack job.” This is a structural furniture problem, not a basic removalist task.It's pprox. 235 cm high, 120 cm wide 53 cm deep. Solid pine construction & very heavy. Continuous solid back panel (no factory joints or seams) Traditional doors and lower drawer section at the front Currently stored in the building carport with good access. The issue is the internal hallway turn, we couldn't get it into the bedroom and Please look at the piece, and propose a solution. In your offer, please clearly explain: Your overall approach How you would get this wardrobe into the apartment given the access constraint. What steps you’d take to keep it structurally sound and visually coherent afterwards. How you’ll deal with structure and movement How you’ll prevent racking, wobble or long‑term weakness once it’s in place and full of clothes. How you’ll handle doors, drawers and alignment How you’ll protect and, if necessary, remove doors and drawers. How you’ll make sure they still operate cleanly (even gaps, no binding) when the wardrobe is in its final position. How you’ll protect existing paint and mouldings while you work. Please send photos or links of your past work I want to ensure the wardrobe is safe, stable and fully usable in its final location. Budget: $500 (indicative). I understand this is a specialist, time‑intensive job - I will be choosing based on the quality of your approach and your track record, not just price. Thank you!

I am a streamer that does pack openings I need a tray built that would have rows where I can put the packs etc

The glass cabinet fell off, it needs to be glue in or attached

We are looking to have a custom-made indoor dog kennel made for our home - see image attached. It would have a marble top. We are based in Palm Beach Sydney.

Got 5 stainless steel benches delivered that need building right now

Need to build a small shelf 300mm wide X 200mm D to hold a little receipt printer

We need a carpenter to construct two shelving units of sizes 1850mmH x 640mmw x 460mmd and attach them to existing lockers on either side. Ideally out of salvage oak laminate or similar. Outside of business hours is preferable. I have attached a photo of what we are trying to match.

Hi, I’m after a quote for supply and installation of a black wooden shelf. It needs to be installed 30cm above floor level and project 30cm from the wall. It will be used for bat storage in a gym setting. Please include both materials and labour in your quote.