Find experienced local carpenters in Plumpton VIC

Need a wooden stool similar to attached image with below dimensions. Nothing fancy, a simple wooden stool which can carry 20-50kgs weight. It can be done in your home carpentry workshop either. Dimensions are - L - 85cm W-40cm H-30cm To be delivered in Fraser Rise. Nearby carpenters only to be contacted.

Light sand and re stain the front porch decking and front door frame

Task Summary: Custom TV Feature Wall & Framing ​Dimensions: 399cm (W) x 189cm (H) x 35cm (D). ​The Task: Build a 3D timber stud frame within the TV cavity and clad it with slatted acoustic panels. The frame must be built to a specific depth so that the finished panels sit perfectly flush with the existing 35cm deep shelving. ​Key Requirements: ​Framing: Construct a structural timber frame (bump-out) to bridge the depth gap. ​Cladding: Install slatted acoustic panels edge-to-edge across the 4m width. ​Mounting: Securely mount a TV and Sonos Beam Gen 2 through the panels into the frame. ​Cabling: Conceal all power and HDMI cables within the new wall cavity. ​Materials: I have all materials already on-site (Timber, SpecRite Slatted Panels, adhesive, and fixings). ​Tools: Please bring your own tools (saw, drill, level, and stud finder).

Hi there! Requiring 2 circle holes to be cut in the side of the laundry cabinetry to fit the hot & cold water piping through for the washing machine. Also requiring shelving under the sink in the kitchen to be cut to size to fit a tankless water filter (Aquala P500) on the right hand side. Filter is already operating, simply need the shelving cut to store it under the sink. Located in Deanside 3336 and can do most days from 1pm onwards. Flexible with weekdays/weekends. Have attached images for reference :)

i want cupboards with doors for storage to be installed in the garage but i want it stand alone in case i move house i can bring it with me lol

Looking for someone to sand and oil deck. Small area, already have decking oil and applicators

Hi I have a new merbau decking installed about 8 months ago and now looking to get it lightly sanded & stained, we have the colour lined up, I have attached the measurements below, there are a few boards that have gone a tiny bit grey but all the timber is brand new never stained. Back Alfresco 419 cm length x 520 cm Width, Front Porch 180 cm Length x 372 cm Width ( I have attached two photos for you, any assistance for a quote to stain the decking is much appreciated

Sand decking and front door. Apply 2x coats of stain to decking and front door. - Due date: Before 15th December 2025

Need to apply sand paper and then stain the timber on alfresco. Dimension is 4 by 3 metres.

I want to have a door for my hallway entrance (as per photos) that can be closed/locked. Hallway Entrance measurement 2380 X 1270 Looking for offers or ideas what's best option at low cost either sliding door like bunnings/Amazon, folding door, shutter style or double sliding to still keep it wide open when needed.

I bought a new house in Fraser rise that has no cutlery drawers. I’d like to add a set of cutlery drawers on the island, closest to the sink, and one door cupboard. I also need a set of laundry overhead cupboards (set of 2).

Need 1 custom cabinet in white carcass Melamine. I’ve done some drawings I can send through. 1130 high 414wide 440 deep with 300mm door at top that opens from the top (it’s a laundry chute) no bottom only sides , flat face and a solid top I will pick it up and install it myself. Need it to slide into the existing cabinet in the photo

Installing arch and 4 shelves (built in) on either side of tv as indicated in the red drawing. The wall is 5.6meters long and each side we would like to be approximates 1.3 meters long. The depth of the units to be 18cm. We would like the frame to cover the current panels, or have the panels removed (stuck on). We would like the design to be the same as the image attached (no cupboard underneath).

Job Description: I’m looking for a skilled carpenter or handyman to install a wall-mounted wooden prayer unit similar to the one shown in the attached image. The unit will serve as a home altar with shelves for statues, a book holder, and under-cabinet storage. The wall has power access for the spotlights. Scope of Work: 1. With Raw Materials: Source high-quality plywood or engineered wood in a similar warm walnut finish Include LED spotlights (3 units) and basic electrical fittings Build and install the prayer unit on the designated wall Secure the unit safely using wall plugs/anchors Place the shelves, back panel, and bottom cabinet as per the image Install the angled book stand and flower holders Final polish/finish to match the photo Minor electrical connection for spotlights (existing connection available) 2. Without Raw Materials (Installation Only): I will supply all materials (pre-cut wood, shelves, lights, etc.) Tasker to assemble and install all components as shown Secure wall mounting using bolts and brackets Electrical light fitting (if comfortable) Minor adjustments to level and align everything neatly Requirements: Experience in wall-mounted carpentry or cabinetry Must bring tools for woodwork, drilling, levelling Comfortable with minor electrical fitting (for spotlights) Attention to detail to match alignment and finish

Need to get some cabinets done next to the empty space in fridge area ( width 480mm / height 1890mm) see sample photo attached for the requirements

Kitchen Base Cabinet Required consisting of 2x side cupboards and 3 x middle drawer set. Specs as follows: Material Brand: Laminex Natural Colour: Polar White 325mm side cabinets to contain 2 shelves inside each cupboard Handles : as per pic below Top: Caesarstone, 20mm Arris, Colour : Intense White Drawing contained in the attachment.

Ensuite open closet, 3 bedroom closets. 3 Bedrooms closet have similar measurements. Need to add some shelving and/or some racks to the closets. I have provided an intended closet design. Need to make measurements and provide the quote.

Need to make a cabinet in the garage. Space is there just need to put the planks and door. Please quote your price Dimensions for cabinet space : H:255cm W: 140 cm D: ~80cm

Would like to get shelvings done in the garage

Strengthen shelving support to prevent damage on storage cabinets. The shelvings are sitting on tiny little pegs that won't support heavy boxes (45kg) on each shelf.