Find experienced local carpenters in Altona VIC

Looking for an experienced carpenter or handyman to repair an older timber window. Four window panels have sections of rotten timber, primarily affecting one side of each frame. At least one panel might need new timber piece. The preferred approach is to repair rather than replace the entire frames, either by cutting out and replacing the damaged timber sections or using a suitable timber repair filler, depending on the extent of the damage. Ideally, the existing glass and all sound timber sections are to be retained wherever possible. Happy to supply timber if needed.

Description: Looking for a skilled carpenter/joiner to build a custom under-stairs cabinet, transforming the space from the "before" to the "after" photo. ​Requirements: ​Cut opening: Create a recess into the wall (approx. 104.5 cm wide x 230 cm high at highest point). ​No back panel: The interior must remain open with no back panel. ​Framing: Construct and securely anchor a robust wooden frame, completely flush with surrounding walls. ​Doors: Install two smooth, handle-less, paint-ready MDF doors (or with discreet built-in pulls) for a seamless look. ​Finish: Neatly spackle, caulk, and paint joints, edges, and frames in a matte wall finish (light grey/beige). ​Deliverables: ​Bring all necessary tools and materials (timber, MDF, hinges, paint, filler). ​Leave the work area clean and free of debris. ​In your offer, please include: ​Total price for materials and labor. ​Your availability / timeframe. ​Feel free to send your best offer.

Timber door frame at external entry way of garage has come away from the sandstone doorway. Need to be re-affixed into place.

Approximately 5 metres long (5 x 1 metre compartments), 450mm high, 500mm deep. Open from top, lids on hinges. Price negotiable depending on material costs, time etc. https://www.bunnings.com.au/diy-advice/home-improvement/furniture-upcycling/how-to-build-a-storage-bench-seat https://www.houseoforange.com.au/products/banquette-storage-seat? srsltid=AfmBOopHV6T9R6aO_GBaT6pCQBtSz_P45G9WRq-FSOEz1jrGgcbzxPMh

We need 4 aluminium frame, in black, with fluted glass cabinet doors. Dimensions are : 483mm W x 600mm H x2 and 313mm W x 850mm H x 2. All with 20mm depth. Will need hinges. Example image attached

Looking at creating a window bench seat with storage underneath and a couple of cabinets either side in dining room area. Below is picture of current area and rough idea of how I want end product to look

Looking for someone to help us locate/make and install doors for some existing in built cupboards, and also some kind of cabinetry / shelving to house our washing machine and dryer. There are three brown cupboard doors which I want to replace with something more modern, a built in robe which needs doors, and the laundry are which needs doors and cabinetry. It’s a relatively big job so I would be grateful to discuss whether it’s possible and the likely cost. I have just put a random figure in the budget (don’t take that as what I think it will cost). I have no idea how much this would usually cost and am aware building materials are not cheap. I have added some photos to get an idea of what cupboards need to be done.

Hi! I'm looking for an experienced tradie or handyperson to stain my timber deck. WHAT'S NEEDED: • Clean and prep the deck surface • Apply stain evenly across the full deck area (2 coats) • Mask off adjacent surfaces before starting • Tidy up on completion PLEASE NOTE: • Must have experience staining timber decks • Please include your approach and any products you recommend in your offer • Before/after photos appreciated Happy to answer any questions. Looking forward to your offers!

I’ve got a 2400 x 900 x 33mm acacia panel from Bunnings. I need it ripped to about 2400x700 and then a few precision cuts made into it to it to fit it into a shelving unit around the uprights, to form a desk surface Will need someone with woodworking experience and appropriate tools - saw bench, jigsaw and circular/bench saw, clamps, etc

Looking for a carpenter/cabinet maker to make this space in our dining room come to life! Stripped back to the studs already (first picture) and looking to turn it into something similar to the other pics.

Sand wood step back and stain it again with good quality outdoor weather proof stain. You need to provide the stain and all equipment and clean up afterwards.

Put together wardrobes floor to ceiling. Must be built standing up. 3 rooms have already been assembled but need to be attached to wall. 2 other rooms are walk in wardrobes. Room one; 4 x 100cm frame, 58 deep 2 x 50cm frame, 58 deep Room two; 4 x 100cm frame, 58 deep 3 x 100cm frame, 35 deep

I need a custom cabinet made for my lounge. Existing unit (see photo) within wall needs to be removed (by you), then new custom cabinet to be built and installed (by you). I will select materials (two pack paint colour and timber OR veneer whatever cheaper for backing panel). Please refer to drawing and photos (existing and reference). The reference photo shows what I'd like. Additionally to what the reference photo shows, I would also want 3 sliding drawers as well. I will source wall light and handles. 1.4mL x 2mH. I can supply technical drawing.

The cooktop is longer and needs the kitchen bench to be lengthened in its dimensions. The bench is a wooden one

3 fence posts need fixing- and fence leaning

Carpenter to plain down 2 doors

Need a cabinet made to extend existing island to the wall. Match the style and colour of existing cabinets as close as possible. Cabinet will include; - Half height drawer for bins - Shelf opening for microwave

Need to repair window trim and fascia board that have some wood rot

Looking at pricing and availability for a ramp to be built for my elderly mother. Measurements & requirement info can be provided in advance

A few weatherboards (wooden) are have small rotting sections, and a small window frame is also rotting due to water damage