Find a reliable appliance technician in Cremorne VIC

Looking for an experienced washing machine/appliance repairer to fix my Haier HWF75AW2 front-load washing machine. The machine displayed “CLr FLtr” and failed to drain properly. I manually drained approximately 10–12 bowls of grey wash water through the emergency drain hose. I had previously removed the pump filter cap, but after replacing it I appear to have overtightened it and can no longer unscrew it, even using rubber gloves for grip. I need someone to: – Safely remove the stuck pump filter cap – Clean/check the pump filter and investigate why the machine isn’t draining – Check the drain pump for any blockage/fault – Reassemble and test the machine to make sure it drains and operates correctly. Machine is easily accessible. Haier HWF75AW2 – 7.5kg front loader. Please only accept if you have experience repairing front-load washing machines/drain pumps. Parking available. Must be done by 10am.

Our Miele cook top has 4 burner The biggest one is not working

Leaking dishwasher. Now everytime we empty water down connecting drains it leaks. Need asap

Remove existing and install a gas stove

Install Miele washing machine into existing plumbing Will most likely by on the ground, but note that machine is heavy

Hi, the dishwasher is having a drainage/flood sensor issue. It makes a continuous sucking/draining sound as soon as it’s turned on, then gives 3 beeps. The 27-minute light flashes and the far-right red star light is on. I’ve cleaned the filter and checked the sump area. There is still some water under the filter area, but not excessively. It seems like the machine may think it’s flooded or the drain pump is stuck running continuously. Model: Smeg DWAF16314-2.

Need a commercial dishwasher repair technician. Issue: Dishwasher only fills the tank halfway with water when turned on Red light comes on If extra water is manually added to the tank, the machine starts running Water is not heating properly and only reaches around 30–35°C Looking for someone experienced with commercial dishwasher repairs to diagnose and fix the issue.

Hi, We have a fault with our Classeq commercial dishwasher and need a technician visit. Issue: The start button is glowing red and the machine will not initiate a wash cycle after powering on and waiting several minutes. Troubleshooting already completed: • Rinse aid level checked and confirmed OK • Detergent level checked and confirmed OK • Tank cleaned out • Hard reset attempted (held power button) Display readings at time of fault: • Wash temp: 55°C • Rinse temp: 76°C Suspected cause: Possible boiler, heating element, temperature sensor fault, water inlet issue, or door latch microswitch fault — machine appears to be detecting a condition that is preventing cycle start. Please advise on next available service time. Thank you

Gas fireplace does not light properly or stay on for very long once lit.

Need qualified electrician to remove existing fisher and paykel BI602MASE oven (https://www.manualslib.com/manual/51861/Fisher-And-Paykel-Bi602.html?page=2#manual) and replace with Bosch oven (https://www.bosch-home.com.au/en/mkt-product/cooking-and-baking/cookers-and-ovens/built-in-ovens/HBF134EB1A). Includes disposal of existing oven and removal of all rubbish and packaging.

water at bottom of dishwasher

Error 11504 on Anycubic Max 3

Fix our Bosch dishwasher, which is showing an e14 error

We have an old claw machine that we use for events, it was working last week and seems to have been damaged in transit. lights turn on but claw ins't moving and theres a clicking sound that goes on and off. Hoping to get it up and running by Friday 27th of March.

It’s a Breville Barista Express

Come and install a washing machine for us.

The washing machine connection from the tap to the machine keeps leaking (both hot and cold)

Hi, I need someone ASAP today to repair a leaking washing machine water connection inside my bathroom vanity. When I turn the water supply back on, the plastic collar/connector around the hose fitting starts squirting water. It’s not the pipe itself — it’s the connection piece. Photos attached so you can see exactly where the leak is. What I need done: • Diagnose the issue (most likely failed plastic nut/connector) • Replace the faulty connector/hose fitting • Ensure both hot & cold taps are sealed and leak-free • Reconnect washing machine hoses (if needed) • Quick test to confirm no more water escaping Please bring the correct replacement fittings — I’m happy to reimburse parts. Must be done today if possible.

We just moved house and need our Bosch Serie 4 Washing Machine properly installed

Samsung fridge is no longer cooling and is making a humming sound. Seeking advice and a quick, cheap repair only.