Find a trusted local electrician in Shoreditch

We have an old electric air pump boiler that’s being removed, but it needs a qualified electrician to check it’s disconnected from the circuit first.

electric gibus awning / line not moving. need to programme a new Somfy Smoove and make sure everything connected to power it so it can move in and out again. This job is to site visit, to supply and programme a new somfy smoove. Any further work to be agreed and charged on top

Site visit to review our electric awning

My cooker electric hob is flashing with 6's and not working. Need an electrician to look and fix this. Have attached pictures. Believe it is a malfunctioning power board. The flat upstairs leaked a week ago, so this could be a bi-product of this. Thanks

fix a retractable electric gibbus awning

electric gibus awning not moving. need to programme a new Somfy Smoove and make sure everything connected to power it so it can move in and out

We've moved into an office building last month. We need an electrical engineer to check our office: - check the fuses - check the circuits - check the overhead lighting - check the wall lighting - We've had humming and flickering wall lights - We've had slow and non-responsive overhead lighting (taking up to 5 mins to have turn on)

As a freeholder on a ex-council flat, we need a full electrical safety test and certificate to provide to the council. We need one every 5 years, which is now due. This is a two bedroom flat on the 13th floor of a tower block.

Our current Ariston water heater has died, we're looking to replace the unit with a new one, removing and disposing of the old one.

Need a qualified electrician to install x1 lightbox (700mm width × 500mm height) at our store on Spitalfields - Mounting the lightboxes securely - Connecting them safely to the power supply - Ensuring all installations are level, secure, and meet safety standards Requirements: Relevant electrical qualifications and certifications Experience with lightbox or signage installation preferred Attention to detail and safety-conscious

Need new socket to be installed on a plasterboard wall (no existing socket at that point). Preferred install location as show in picture, blue box. Nearest existing socket is approx. 2 metres away on the same wall. Prefer flush-mounted installation in the plasterboard (cut-out and back box). Electrician to supply all materials (back box, socket, cable, etc.). Thank you!

There are existing smoke alarms in the apartment, they need to be replaced and new need to be installed. A job for certified electrician.

We are installing a simple kitchen in our office. We need to run a new circuit for the hob and oven, move some 13a sockets and plug some new lighting into an existing circuit, There is already ceiling mounted cable trays so should be simple.

I have an 8.5kw shit shower that is failing. I want to change it to one i have already purchased, which is 9.5 kw. I will need my fuse to be changed, thicker wiring and possible a reroute of main feed. Probably about a foot, no more. I do not want the final fitting to be done until i have tiled over the new fitting, as i am not sure if it will be the same, i'd rather a plumber to tell me first. If you respond with "No worries, no need to rewire or change the fuse" You are not the person for the job. I am not trying to set my home up in fire. I would also prefer a woman. Respectfully.

My HVAC is stuck on, as is my electrical.hot water. I believe both are due to switches being broken. I also need a standard light pendant changing as an existing one is cracked.

Hi, we're looking to add 3 new double wall plug sockets to one of our meeting rooms. 2 sockets lower down and a 3rd at the same height as a TV. We can take a spur from a plug in the office directly behind where we'd like to install the new plugs.

Mains wired smoke alarm beeping. Needs to be replaced. Immersion heater cap missing. Needs to be fitted. Labour only price.

Cooker extractor fan fitted.

I have a floor lamp that no longer works. It was originally from the USA and had been plugged into an adapter which is no longer working. Need it converted to UK please.

Electrician needed to change 1 x 10A 2 way switch, 1 x 20A 2 way switch and 1 x 3 gang toggle switch (photos attached) - also to wall mount 2 x electric plug in small radiators (same as photo) - all materials supplied, free parking can be organised