50 Chimney Services near you

Repointing chimney stack and parapet.4ft lead flashing needs replacing at base of front of property on right. Some lead flashing needs tapping down.

We've taken out an old kitchen extractor, a filter type and we want to replace it with a new extractor. The power is still there, we need supply and install on a new extractor, with a chimney then a short duct above the ceiling [it's a bungalow] to a new outlet in the plactic eaves.

Have a 14kg mirror that needs hanging correctly On a chimney breast wall

Need a carpenter to fix the chimney in the kitchen. Currently got an electric hob. Planning to replace with Gas. Need a carpentar to move the chimney higher keeping in view the safety.

Acustico wall panel to be fitted on to the chimney breast with a square to be cut for plug sockets as tv is mounted there.

Need asap chimney beast wallpapered and one bedroom wall materials supplied

Remove chimney and plaster room and ceiling

Just to instal the cooker hood

Plaster round 3 chimney breast and skimming

To create a new 1.2m high wall both sides of the chimney breast in the bedroom. And then shelving above. At the moment there is shelving all the way up on one side of the chimney breast which will have to be partly removed I would have thought or maybe the wall can just be made over it.

Builder has opened up the inside of a chimney stack in our kitchen. The front and top area has been covered with timber. Need someone to install a 90cm extractor hood, fixing to the timber, connecting to the extraction duct. (already installed) and electrics (wiring already installed. The extractor hood is Smeg KSG9P4X 90cm Stainless Steel Canopy Cooker Hood

We need the brackets on the chimney to be raised to accommodate TV and for internet connection to be done. TV was already hung lower so bracket and wires are already there. Just need to move it up higher.

I have non-functional chimney cooker hood which needs replacing. I have purchased new cooker hood. There is an existing electrical point which can be used again for new hood.

I would like a fake chimney built above a fake fireplace which is between 2 bookshelf cabinets

We need a bird guard fitted to a chimney.

Inside of chimney breast to be tiled with the green tiles pictured - including base and all sides. I’d also like a piece of white trim to be fitted along the bottom of the opening near the flooring. Negotiable on fee.

I need for my brick built bbq a cast iron door and chimney roof.

1st floor bedroom. No loft space work needed as the loft has been converted so all structural support already done. Need chimney breast removed, and make good wall with bonding and high quality plastering.

i need the old chimney cooker hood taken off and new one installed

Remove bracket from chimney breast and mount it on another chimney breast