Hire a trusted appliance repair service in East London

E06 error code on bosch machine

Task description My Hisense washer-dryer (model WDQA1214EVJMT) aborts every drying-cycle with **F17 (over-temperature / heater safety) ** on the display. From the manual and forums this points to the dryer air path or safety thermostats: • Clear lint path behind door seal and condenser bottle • Check/replace NTC sensors or resettable thermostat on heater rail • Inspect fan and ducting for blockages, test heater element continuity I need an experienced appliance tech to: 1. Diagnose the root cause of the F17 fault and confirm which parts are required. 2. Supply and fit any genuine parts (authorised replacement parts only) OR advise me of part numbers so I can order them. 3. Run a short wash & dry cycle to prove the fix and leave the work area tidy. The machine is on the ground floor of a terraced house; off-street parking available for small van. I can help move the machine if needed.

Tunturi tradmill, possibly J4, starts, but then cuts outs showing 'Check Speed Sensor' message.

Two issues I believe First is we have a Nest thermo that either isn’t working properly anymore or it’s not connecting via the heat link properly as it’s neither learning or doing anything we instruct it to do Second is that the system regularly loses water meaning we have to top it up regularly via the loop .. which isn’t optimal or ideal

There is a constant buzzing sound from the fridge. Its annoying!

Washing machine is letting off an unpleasent smell. We think it might be drainage issue. Please help!

I need to fix a washing machine soap dispenser

We have a Delonghi Dinimica Touch and something inside has started leaking, the waste grounds container fills up with water and there is also water leaking out the front of the machine. I have bought a mechanical valve replacement, opened the machine up and attempted to install the new part but it looked too complicated for me. Since putting the machine back together we now get a “insert infuser assembly” error too.

We have a kitchenaid brand new bean to cup machine, the unit on the side won’t go back in and kitchenaid support is uselesss so need someone to come and fix it

The washing machine runs a cycle, dispenses the washing tablet during the cycle, but at the end of the washing, the washing pod did not dissolve at times, and the dishes come out dirty.

Electric lawnmower overheated (I think) and cut out whilst running. I suspect either the fuse has blown or something else due to overheating potentially?

Drone leg broken off I have a replacement leg Mavic pro 2

Our thermostat has connection problems, meaning the heating won’t turn on. We’ve tried all the troubleshooting suggestions in the manual and nothing has worked.

Fridge and freezer are closing properly maybe something to do with seal Also seal on oven has broken

Espresso machine Brand Sage Bambino Water doesn't run from the steamer or the handle

Washing machine (IWDE126) doesn’t appear to be draining. Clothes remain soaked and water levels high in machine post wash. I’ve tried to empty the filter and lots of water is coming out of it I think it’s either a pipe issue or a part needs replacing. Thanks

I need the grill in my oven repaired, as well as the internal oven light fixed and the internal seal around the oven, which has come loose, put back in place.

We have a SAGE coffee machine (the Barista Express) that isn't working. The pumping gauge is working but there's no water at all coming through the machine - no steam or hot water and no water through the portafilter basket.

Our washmachine stopped working, the drum is not spinning and we see an error code on the LCD display. It shows "E12". Brand: Smeg Model: WDI14C7

Washing machine door seal for Samsung eco bubble 9.0kg needs replacing. Current seal is torn, needs removing and replacing with new door seal. I have new original Samsung seal and clamp.