Find an experienced local venetian blind repair expert in London

Three recess-fitted 50mm real-wood Venetian blinds (warm brown slats, dark brown cloth ladder tapes), each about 110 cm wide x 8 ft drop (approx 244 cm), inside brick window reveals. These are tall blinds, so a ladder or steps will be needed. The lift and tilt cords have gone on all three so they won't raise, lower or tilt closed. Need all three restrung so they raise, lower and tilt properly, plus one split slat near the bottom replaced (or moved to the bottom / removed if a match isn't available). Ladder tapes are intact. Please bring cord to suit 50mm wood slats. Photos attached. Address: Durango House, 5 King Edwards Road, London E9 7SG.

Labour only. Install 6 sets of Venetian blinds. 2x150cm 2x90cm 1x120cm 1x60cm. Standard drop 150cm

One of the pallets on our venetian blinds have snapped and we would like to get fixed if possible

I need a bamboo Venetian blind cut either side from 105cm to 95cm

Looking for someone to install 2 faux wood Venetian blinds from 247 Blinds. One blind is 116cm wide and the other is 57cm wide. Both blinds are already supplied and ready to fit.

I have two sets of wooden Venetian blinds in my kitchen that are broken. The cord has snapped on one and the gear for the cord on the other one is broken. Also an additional Venetian blind in a bedroom that works but has fallen out of the wall and needs to be put back in.

One string in the pulley has snapped so it needs to be replaced and re-threaded through so both sides of the blind can be lifted

I can take it to your workshop and collect when it's done as the base is clip on clip off.

E11 - Leytonstone close to Leyton Tube I have a Venetian blind above my staircase that needs hanging. I have a stepladder available and the kit I bought from Amazon comes with screws / parts.

Venetian blind cord snapped on one side, blind won’t roll up. Need restringing. Borehamwood, Hertfordshire.

The cord has broken and now the blinds can't be raised or lowered.

One of the venetian blinds needs recording.

Moved house and need Venetian blinds cut to fit new windows and installed

Cannot close/open slats - very limited movement. Blind ca 1.9 m by 1.2m drop. Orientation of slats controlled by cords on LHS of blind

3 wide slat wooden Venetian blinds need repair 2 need new locking mechanisms and cords to pull blinds up 1 needs one new slat. Broken at short end piece where the cords go through. I will try to send photos. Can you you repair please? Thanks Barbara Parry

Hello would love for someone to help put up our new blinds as I have no idea. The blind is slightly wider than the window recess, so it will need to be face-fixed to the wall above the window rather than fitted inside the recess. The blind comes with universal brackets suitable for face fixing and the manufacturer’s fittings. The job will involve: * Removing two old blind brackets from inside the window recess * Measuring and centring the new blind above the window * Drilling and securely fixing the new brackets to the wall * Installing and levelling the blind * Fitting the supplied child-safety cord fitting Please bring your own drill / other relevant tools. Hope this makes sense because it doesn’t to me! Much appreciated!

Hi! I need help repairing a faux-wood Venetian blind. The cord used to raise and lower it seems to have come loose or stretched from its attachment point, which itself seems to have become a little loose. I think it should be a fairly simple repair — it happened while I was just trying to raise the blind normally, without pulling hard or forcing anything. I’d need someone to check the mechanism and reattach or tighten the cord/fixing point. Thank you!

Hello, the blinds in my son's nursery seem to have stoped opening or closing. I think there might be an issue with the mechanism. Is this something you're able to assist with?

Our Venetian blind needs to be repaired. The strong which you use to operate the blind and pull it up has snapped. As a result they're permanently down and can't be pulled up. I was hoping there's a way to restring the blinds so it can be operated without having to purchase a new one.

One of the chords has become a little bit tough to pull and that has resulted in it becoming unsecured on one side at the top of the blind. Blind needs securing at the top and lubricating.