Find a reliable computer and IT professional in London

Help with building my pc

new hp laser printer needs setting up

Body Max T60 performance Treadmill not turning on. I have done basic checks that are recommended but still unable to get working . It is about 8 years old and has no been used to its maximum during this time. ,

My gaming pc doesn’t turn on and I only used it a few times 2 years ago

💻 Cable Management & Gaming Setup (2 Visits – £70 per Visit) Budget: £140 total (£70 per visit) Location: UB2 (Southall area) Timing: Stage 1: Before PC arrives (this week) Stage 2: After PC arrives (next week) 🔧 Task Details: Looking for a reliable, detail-oriented person with experience in PC or gaming setups to help with cable management and desk organisation in my home office/gaming room. The project will be completed in two visits: 🧩 Stage 1 – Pre-Setup (Before PC Arrival): Assess the layout and plan tidy cable routing. Tidy and conceal existing wires (monitor, lamp, peripherals). Prepare cable management (clips, ties, trunking) ready for new PC installation. Ensure all power and desk connections are clearly organised. 💻 Stage 2 – Final Setup (After PC Arrival): Connect and route all PC cables neatly (monitor, speakers, subwoofer, RGB lighting, etc.). Install a monitor stand/arm on the desk (provided). Complete a clean, professional, and aesthetic cable setup. 🧰 Requirements: Experience with home office or gaming setups. Must bring basic tools and cable management supplies (Velcro ties, clips, etc.). Must be tidy, careful, and reliable — aiming for a studio-grade finish. 💷 Payment: £70 per visit (£140 total for both visits). Payment is released after each visit completion.

General sort out of it equipment

I can't turn on my laptop. there's just a blank screen.

Building gaming pc ........

I've recently setup a unifi network in my home using a USW Pro 23 POE+ and 6 access points, however it is working but dropping and I am not sure I've set it up correctly

I built a new pc a few weeks ago and the ram cards are not working together. I have 2 16gb cards and the PC only boots up properly if I have 1 in the B2 slot, I am not sure if it is an issue with the motherboard/bent cpu pins. Both sticks of RAM work individually (I interchanged them - so they aren't the issue).

I have new PC parts to install - PSU and GPU. Also I would like to improve the cable management of my PC.

There says there is an error in the lower cassette of my printer - this was from a paper jam but there is no paper jam in the printer .

Upgrade my current PC, from AM4 to AM5 CPU, Motherboard and Ram update to support change in system. Currently CPU: Ryzen 5 5600x GPU: 4070 Super Motherboard: ROG B550-F I have parts arriving in 2 days.

I tried to install myself. Made it to work and connected with my phone app. But for some reason I am unable to turn off the heater from my phone.

All PC components are connected but Monitor is not connecting to PC

The boiler is working but the thermostat is set to certain times and we need to change it to “on” all the time

I've had a HP laptop for a few years that's due a bit of a refresh/upgrade and is running really hot at the moment. I have bought some part upgrades and looking to have these installed + timing for a general clean-up of equipment and maybe thermal paste etc. This was the laptop: https://www.argos.co.uk/product/3268753 Have a new SSD, battery + RAM

I have a custom small form factor gaming PC that’s no longer posting to BIOS, and I’m unable to pinpoint which component is failing. All parts (CPU, GPU, motherboard, RAM, SSD) were purchased new within the last month, except for the DC-ATX power supply, which I’ve just replaced — but the issue persists. Symptoms: • System powers on (fans, lights), but no display output • Multiple known-working GPUs tested with no success • No debug LEDs or beep codes • Have already tried RAM reseating, CMOS reset, different GPU, new PSU, etc. Looking for someone experienced with custom PC builds (especially SFF/ITX systems and HDPlex-style PSUs) to help diagnose the issue — ideally in person

Assist with setup/teardown of a small exhibit stand (laptop, two screens). Engage with visitors, explain a new tech app (I will provide a script), scan QR codes for sign-ups, and ensure the stand is always attended. Must be professional, proactive, and tech-savvy.

I need a ring dooebell set up