Find a local network troubleshooter in London

hi looking for someone who is able to run a 2 cable and terminate both as when i try the it only run at half speed and when then not work with new router this will be from a front bedroom router to a rear bedrooms i do current have a one run but looking also run a second one ,this will across a loft space which i will make sure i clear a space the current holes may need enlarging also will need to be professionally cable manged

WiFi system on the blink … internet fine. Reboots not working. Needs reconfiguring? Virgin with TP-Link and Tenda repeaters

I have 4 QNAP servers running Plex but I can no longer see them outside of my home network and need to be able to access from outside of the local network

Re-post (tasker disappeared) - need new “heads”? On Ethernet cables. The plastic end points on the cables don’t plug into my switch. All points need testing and labels. An experienced expert in setting up home networks is ideal as once you leave I need good connections from all points through the switch through to our GB fiber internet. I would also like a quick chat on cost to setup a NAS and network printer, transferring data from an old pc I want to decommission because I just got a new one, and setup of a media pc. Just a quote at this stage.

Adoptin new UniFi outside units and optimises WiFi

Test and patch network cabling throughout my 3 story house to ensure I can use a wired and wireless network connection

Adding extender(s) and ensuring multiple network devices are online, plugs, bulbs, TV nodes, etc. if necessary adding a second extender according to the needs of the property. To be sourced from a nearby Argos.

-Internet not working properly in home office (weak or no signal) -Needs diagnosing (router, wiring, signal coverage, etc.) -Property located in N2 -Ideally someone with networking experience -Looking for ASAP availability

I suck at home networking. A recent broadband change and the introduction of a NAS has made our WiFi so home a bit of a mess and I’m looking for someone who knows what they’re doing to sort it out

I have a PoE and need a cat 6 network cables to desk and printers in my office. 8 desks

Setup a wifi mesh network for Vodafone Gigacube 5G using TP-Link Deco mesh system.

Reconfigure 2 old netgear routers to work as access points around my home. My main router is working. I can put the old routers back to factory settings. No cabling needed.

Need to do a thorough check to my network and home office setup to ensure it’s safe and working properly

I've moved into a house with a Google Mesh network installed by the previous owner. I'd like to: - Reset the network - Add another node - connect a few smart home devices I've had problems connecting

I have a Community fibre provided linksys router and I have added 3 linksys extenders to improve coverage across my 3 floor house. 2 of these 3 extenders have stopped working and just display redlights. I have used Community Fibre support to try resetting these but it has not worked. I bought a new base router (TP-link Archer550) but I cannot get this to register an internet signal from the Community Fibre modem and they have told me they cannot provide support on 3rd party equipment. I need help either getting the original equipment to work or with setting up the new TP-link router I have bought.

I need assistance setting up an extended Ethernet/network cable, connecting it to the extender, and routing it to the backrest. See images for reference.

I’m looking for someone experienced with Ethernet / data cabling (Cat6) to help convert an existing wall socket into a working RJ45 Ethernet outlet. Context: This is a studio flat The building is already pre-wired with Cat6 Ethernet There is a central patch panel One wall socket currently has a phone-style faceplate, but there is a Cat6 cable behind it The cable simply needs to be correctly terminated and connected What I need done: Remove the existing phone-style faceplate Fit a Cat6 RJ45 Ethernet wall socket / faceplate Terminate the Cat6 cable properly Patch the corresponding port at the patch panel to my router Test the connection to confirm it’s working (basic network test is fine) Optional / nice to have (not essential): Advice or help adding a small Gigabit Ethernet switch if I want to run more than one wired device from the socket (e.g. Apple TV + laptop) Important: This is low-voltage data cabling, not general electrical work I’m specifically looking for someone comfortable with Ethernet termination, RJ45 keystones, and patch panels Please bring your own tools Happy to supply the faceplate if needed, or reimburse if you supply it If you’ve done structured cabling / network installs / AV or IT cabling before, this should be a quick, straightforward job.

Hide cables in white conduits in 3 rooms to make them tidy looking.

As previously discussed at the previous job.

I have set Virgin media hub in modem mode and attached external router but etherenet cable work only when plugged to router and not modem or switch. Used to Work well. Need an expert to look at it