Find an experienced plumber in North Sydney

Licensed Plumber Needed – Disconnect Hot Water System & Isolate Pipework (Class 2 Apartment, NSW) The apartment is in a Class 2 building and is about to undergo a full interior renovation, starting with magnesite flooring removal. A new hot water system will be installed later. For this job, I need a licensed plumber to: Isolate and disconnect the existing hot water system, drain the tank, and move the unit aside so the riser behind it can be inspected. The unit doesn’t need to be removed from the apartment. Drain, isolate and cap the pipework that runs just above the slab through the magnesite-affected areas. Remove these pipe sections if possible. Please include this in your quote. If removal isn’t included, please cap them so they’re fully disconnected and safe for the flooring team to lift. Leave all capped points secure and clearly marked. Cold water needs to stay on to at least the toilet / kitchen tap for the trades. Please note: Power to the hot water system will be isolated and disconnected by my electrician before you arrive. This is a strata building. Please let me know if the water needs to be shut off at the riser so I can arrange it with the building manager. Requirements: 1. A current NSW plumbing contractor licence. 2. Public liability insurance, with a copy of your current Certificate of Currency. 3. Notice of Work and Certificate of Compliance lodged where required. If interested, please send: 1. Your quote, with pipe removal priced separately if possible 2. Your availability 3. Your licence number

One toilet blocked. Needs fixing.

Looking for a licensed plumber with leak-detection experience to inspect a damp area at the back of our North Sydney house This area previously had timber flooring and two hair salon wash basins. A handyman removed the basins about three years ago, and we’ve noticed persistent wetness/dampness in the concrete since then. We suspect a leak beneath the floor, but need the cause confirmed. Please check the old water supply and drainage connections, confirm they’re properly capped or sealed, and determine whether there’s still an active leak or another source of moisture. Please quote for the initial inspection and leak detection. Non-destructive checks are preferred first, with any repairs or opening of the floor quoted separately for approval. Photos attached.

Scope includes Install 1x toilet Install 1x vanity Connect 1x washing machine Hang 1 x toilet roll holder Clear/clean building debris from blocked shower and floor waste gully only

I have 2 pictures and a round mirror that need hanging and 2 shower heads that need swapping out.

Getting a new dishwasher delivered to a recently refurbished office in North Sydney. Need someone to cut holes in the cabinet and connect to the plumbing under the sink. Please see images

Replace light and shower head

Water is going down tried the drain cleaner

The water inlet either gets atuck or there is excess water release. The toilet seat screws need fix

Licensed Plumber to Replace like for like hot water system with warranty. Please quote price - $1000 is a guess. Thanks

Need plumber to attend and use camera to identify sewerage leak and quote to repair.

Hook up shower head and cut concrete gully into drainage

Install my new dishwasher and remove plumbing from old one

Description: We’re looking for a plumber to install a hot water pipe in our office kitchen in North Sydney. Currently, the sink only has cold water. The goal is to connect a hot water line so both the kitchen sink can supply hot water. Details: • Location: Office in North Sydney • Task type: Install hot water pipe to existing cold-only sink • Access: Easy access under sink and through wall cavity • Preferred timing: flexible • Budget: Open to quotes – please include labour and materials Optional: Please advise if a small under-sink water heater is needed or if connection to existing hot water system is feasible.

my two kitchen sinks are both clogged.need help to clear out the sink and pipe

I need the hose connected from my washing machine to the hot water tap. All is set and water is on, just having trouble connecting hose to the hot water inlet. Will need to bring a large spanner/tool.

Washing machine needs to be connected to taps - just moved in

Looking for this task to be completed in the second week of May. Tap and sink to fitted. Hole for sink has been cut into cabinet and bench top already. Cabinet same as the ones pictured will surround plumbing. Only cold water needs to be connected with previous redundant pipes removed.

Sink hose is leaking, I need a plumber to change it.

Toilet is slightly backed up, sometimes it flushes and sometimes it does not Water tank seems to have issues with filling up? 1/2 flush button does not work. Not sure what’s wrong tbh. Would love someone who can do the basic unclog as well as fix whatever is wrong with the toilet haha Budget is quite firm. Plz give a quote for the entire service not just a call out.