Find an experienced handyman in Windsor QLD

One of my sliding wardrobe doors has come off its track/roller and I need someone to put it back on and make sure it is sliding properly again. It is a top-roller wardrobe door, with a guide/fixture at the bottom that has a cut-out. Please see photos for more details.

Licensed electrician needed today in Windsor 4030 for a ground floor apartment. The property is a short stay rental with a guest currently in residence, so this needs to be completed today and done tidily around them. The problem The light built into the ceiling fan has stopped working. The fan itself runs normally on the remote. The light does not come on. What has already been tried The wall switch has been tested in both the on and off positions, by the guest and separately by our onsite handyman. The remote has been tested with the wall switch on, which is the correct operating sequence for this unit. It is an integrated LED, so there is no replaceable globe. Our handyman removed the faceplate to look at the exposed wiring. When he moved the wiring slightly the light flickered on briefly, then went out. He could not reproduce it and stopped there as he is not licensed. That points to an internal wiring or driver fault rather than a switch, remote or globe problem. Scope of work Diagnose the fault and repair it if it can be repaired on the day. If a same day repair is not possible, we want the option to replace the ceiling fan and light unit outright in the same visit, so please come prepared to advise on that. Before doing either, send us a price for the repair and a price for supply and install of a replacement fan and light unit, and wait for our confirmation. Photos of the fault and of the completed work. Make good and test the light and fan on the remote and the wall switch before leaving. Background that may help The ceiling fan was installed by an electrician around six months ago.

Looking for quote for a frameless shower screen supply and install. Brushed brass/gold colour for fixtures/finishes. Rough measurements left side 490 right side 740 (hinged door). Meet at 135 degrees Based in windsor 4030. Thank you!

I need a door replaced - I have the door All you need to do is remove old door and put new door on - I will. Help If necessary

Kitchen removal and Kaboodle installation by one contractor, Windsor QLD unit. Target October 2026; dates to agree. Indicative budget $7,300. Quote full scope incl. GST if applicable, with removal/install breakdown and any combined-job saving. STRIP-OUT: remove existing joinery, doors, panels, kickboards, benchtops, disconnected sink/tap, wall splashback and loose adhesive. Include protection, dust control, loading, disposal fees and clean-up. Retain floor, structural walls/slab, window, ceiling, corner duct, gas stove and fridge. Licensed plumbing/gas/electrical isolation by separate trades BEFORE removal. INSTALL: we supply Kaboodle cabinets, fronts, panels, kickboards, handles, hardware and Hevea top blanks. Approx. 12 units: 7 base, 1 pantry, 4 wall/rangehood. Include assembly, levelling, secure fixing to masonry/appropriate structure, scribed fillers, panels, kickboards and hardware adjustment. Include normal fixings/consumables and packaging disposal. Retain 297 x 100 mm rear-corner duct. Measure and modify cabinet AND top around it, seal cut edges and reinforce as needed. Do not cut/remove duct; maintain required access. PENINSULA TOP: 900 mm DEEP. Oversized planner extension is visual only. Verify site and give complete top cut/joint list BEFORE ordering; PDF lists only 600 mm sheets. Include required supports, template, cuts/joints, sink/tap openings, fitting and timber sealing to required faces/edges/cut-outs. We supply sink/tap templates. Plumber mounts/connects sink; electrician fits supplied hood; gas fitter reconnects retained stove. Coordinate openings/clearances. No new stove supply. Splashback tiling, service work, painting and floor replacement separate. 3D image shows PROPOSED design only. Verify planner discrepancies: site window 1490 x 1185 and ceiling 2500. State experience, licence where applicable, insurance, availability, access assumptions and exclusions. Materials delivered to unit separately.

Dissasemble relocate and reassemble revolution r9 home gym, full dumbbell set with racks and misc equipment Must have experience building multi function gyms and have own Ute/van/truck Pick up Windsor delivery thornlands

We have a small home gym we need assembled

Looking for an experienced and reliable maintenance person to complete an initial maintenance visit at one of our short-term rental properties in Brisbane. The initial task will include: Inspecting the property for general maintenance issues Treating and cleaning any mould identified Cleaning ceiling areas and windows where required Checking the general condition of the property Completing minor maintenance tasks where possible Taking clear before/after photos and reporting any additional issues identified We manage multiple short-term rental properties across Brisbane and are looking for someone reliable who may also be available for regular weekly maintenance tasks going forward. As these are short-term rental properties, availability needs to be reasonably flexible around guest bookings and property access. Requirements: Previous maintenance/handyman experience Own tools and transport Experience treating mould safely Reliable and able to attend consistently Good communication Able to provide clear photos and updates following attendance Appropriate licences for any work that legally requires them Please include details of your relevant experience and general weekly availability when making your offer.

I have 2 old table lamps. The electrical cords in both are thick and clumsy and the switch in one is right near the base of the lamp which makes it unstable

Replacing a ceiling fan in lounge area. Installing a ceiling fan in dining area. Fans are shown in photos. With pictures were the existing fan is and where the other fan will be

We are looking for a reliable and experienced maintenance person to assist with the ongoing care of our property portfolio. This is not a one-off job. We are looking for someone local who can work with us on an ongoing weekly basis and become our regular go-to person for property maintenance and preventative checks. Regular work will include: - Mould treatment and prevention where required - Cleaning/treating white ceilings and window areas - General property walkthroughs and condition checks - Identifying and reporting maintenance issues before they impact guests - Minor repairs and general maintenance - Ad hoc maintenance tasks as required - Providing photos and updates after attending properties We are looking for someone who is: Reliable and consistent Available for work each week Experienced with general property maintenance Comfortable working independently Proactive and able to identify issues Good at communicating and providing updates/photos Able to travel between multiple properties There is potential for regular ongoing work across our portfolio for the right person. Please include your experience, general availability, areas you service and your preferred hourly/day rate when applying.

I have three windows and no drill and need them hung

Looking for someone experienced to assemble an EasyShed bike shed. Shed is 2.25m W x 0.78m D x 1.34m H and comes as a flat-pack kit with instructions and screws. Also needs to be drilled into concrete slab. Ideally looking for someone who has assembled sheds before and has their own basic tools. Task is assembly only – shed and all fixings will be on a prepared, level surface. Please quote if you’re confident you can complete the job neatly and efficiently.

Needing some handyman assistance in our gym located in Windsor, QLD. We have a few jobs that we could use some help with - a randomly broken toilet door handle/lock that needs reconfiguring, hanging of shelves, hanging of ply underneath our staircase, and dismantling/removal of an old cube shelving unit

Hand up curtains for 3 windows Room 1 - double rail install, hang double curtains Rooms 2 and 3 - single rail install with single layer of curtains Curtains and rails from Freedom Must have experience hanging curtains!

I moved into my unit about two years ago and have always cleaned the air‑con filters myself, but I don’t believe that was done regularly before. I’m also not sure whether the air‑con has had any checkups, servicing, or maintenance since it was installed.

I need to install 2x floating shelves in my home, which has steel wall studs. I will supply the shelves, brackets (which have been pre-rebated) and screws. One shelf is 285x1200mm, the other is 285x1700mm. The shorter shelf comes with 2x450mm brackets, the longer shelf comes with 2x650mm brackets. The brackets/screw holes were positioned according to measurements that I gave the company, so I'm hoping these will line up neatly with the steel studs. These are the instructions that the company provide for installation: https://the-timber-line.helpscoutdocs.com/article/20-floating-shelf-installation-for-steel-framed-homes

I need a TV unit made and wall mounted (steel frame house). Installation Manual https://img.zcdn.com.au/docresources/38024/22/222858.pdf

Repairing wooden lattices

Hello, I need a handyman to repair the hole one side of the roller blind has left when it fell and to hang the blind again. The opposite side is fine. It's in a small block building from the 90s. Happy to provide more details if needed. I have a few other things in the house that need small improvements and repairs and I'd love someone to give me an hourly rate so hopefully I can regularly call when I need something fixed. The rate offered is hourly, happy to pay the rest through your preferred system. Some examples: straightening and tightening the sink faucet, installing a new lock in the laundry, hanging a shelf... Thanks!