Find an experienced handyman in Willoughby NSW

need to repair our gas fireplace which has stopped working. Manual is below. Business we brought it through is no operating. Neither the remote or the manual button on the fireplace will turn on the pilot light. think it might be an ignition problem. https://www.manualslib.com/manual/763347/Real-Fires-Flameboyant-Rf800-Pearl-Flameboyant-Rf800-Minimal-Flameboyant-Rf800-Modern-Flameboyant-Rf800-Classic.html?page=14#

Hi! I need help with repairing the wooden parts of the window due to dog scratches and bites 🥲 This would include putting in wood filler, sanding it and painting it. I do not have the exact paint too, if you have an eye for colors, that would be fantastic. It’s a floor to ceiling window, but repairs are only needed for the bottom and the one right above - basically what a Shih Tzu can reach. Photo attached for reference.

Treadmill (Everfit TMILL-CHI-420-M6-WH) is experiencing ongoing belt and motor issues. The belt slips or stops completely when weight is applied, even at the lowest speed. Error code E-2 appeared initially, which indicates a motor or speed sensor fault. After adjusting the belt tension, error E-0 appears, but the issue persists. Belt has been correctly lubricated and tensioned per instructions. Issue appears to relate to motor power delivery, speed sensor, or drive system.

I’ve removed existing panels and cleaned off old silicone. Needs re-installation preferably using existing drill holes. I will supply new hinges and brackets. Panels are 100cm fixed on one side and 20cm fixed on the other with 60cm door hinged to the 20cm panel. Experts only please.

Re-install existing glass panels (two fixed and one door), using existing holes drilled into existing tiles. New brackets and hinges supplied by owner.

Need a professional handyman to repair a hole on the plasterboard wall. Size is about 5cm x 5cm. The job also includes painting the wall to the same color.

- hills hoist rotary clothesline needs its all clothesline restrung/ rewired (if required we do have some clothelines string on site) - latch also broken and needs the actual part to be replaced (refer to the picture which shows the area which is now missing a part)

Hello Need Core Drill of 2 x holes and then removable bollards (supplied by me) to be installed / concreted in, the Installation of 2 x (removable) Bollards (that can be locked to secure down the garage door (already has mounted brackets on door ) see images. NOTE: I will provide the bollards (unless you can get them) for vehicle storage / Garage located in Willoughby. Flexible on dates / times.

Have an Easyshed that has acquired already semi-assembled, old owner has left all the doors, roof, and wall panels assembled - all that we need to do is put attach them together, bolt it into the slab and do some silicone weatherproofing at the bottom of the shed to prevent water from coming in. Photos provided of shed disassembled into large panels, and also assembled for size reference.

Replace outdoor deck balustrade post

Installing an awning to my roof rack and mud guards to my two rear tyres. Vehicle model: 2010 Subaru Forester

I need a handyman to: - purchase and install an external door to my garage (202cm tall, 72cm wide, 40cm thick); - purchase and install an extractor and ducting for my laundry that extracts outside; - fix the drawers in a child's bedroom (looks like rail has been bent); - fix a folding bathroom door (there is a lug missing that goes into the runner); - fix two leaking showers.

Our under-mounted kitchen sink has detached from the bench top. It seems it was only held in place by glue, no clips or straps. We need a quote to reattach the sink. There is no apparent damage to pipes or the sink structure. We would like if possible to add straps or brackets to provide extra support for the sink moving forward.

I’ve got a 3.2m extendable curtain rod from freedom. I’ve tried and failed to screw it above a bedroom window as the plaster is too thick for the hardware they supplied so the screws won’t pull tight and expand the anchor. Not wanting to mess around with what I think is the right way to install it I’d like to get someone with experience to do it properly for me before I got drilling more holes. The brackets are very simple with 2 screws to pull them onto the wall. And there is 3 brackets to install.

A hung window in a bedroom keeps sliding open when attempted to be locked. Looking for someone to help fix this, thank you

Hi I need a licensed electrician with insurance to install my ceiling fan.

Please measure, supply annd install retractable flyscreen.

Mowing, whipping and blowing - View all the details of this offer: https://www.airtasker.com/offers/01JF6HPPGM5C5EXJN35HZ3CSWA

I have a SWB 1994 vitara that I want to install an nudge bar too. I have restored a nudge bar pulled off a 1993 SWB that had 2 damaged brackets that will need to be replaced/fabbed so it can be bolted on. Looking for someone with these resources and to do the installation

I need to fix a big foldable galvanised metal window. It’s hard to open when sliding and the main door needs a better system to stay locked.