Find a professional sink contractor in VIC

Fix or replace under mount sink

Need laminate benchtop to be cut for sink installation. Will also need bench to be drilled into wall and 3 cabinets to be hung, and 1 under the sink to be installed. All are in flat packs so will need to be assembled, all rubbish to be removed.

Need hot water sink in the shop. Will need to install a pump as well as the water source is far.

Looking for an experienced handyman or kitchen installer to remove and replace an existing laminate kitchen benchtop and sink. The job includes: ● Removing and disposing of the existing laminate benchtop. ● Removing the existing sink. ● Cutting and installing new laminate benchtops (already purchased). ● Installing and sealing a new sink (already purchased). ● Ensuring everything is level, secure and finished neatly. Benchtop sizes: ● 2800mm x 600mm ● 1400mm x 900mm Please let me know your experience with similar jobs. Thanks

the wash basin plunger is firmly stuck and cannot be pushed to drain the wash water still in it.! It probably screwed on and locked it down too tightly and the spring mechanism cannot plunger up again. Need plumber to come fix that on monday as now the basin is unusable. See attached photo of choked powder room basin with dirty water, which is a Posh Domaine Basin 420 -

I neeed this mop sink fixed either make a box or mount on the wall then fix the plumbing and water connection And the water connection needs to be done with kitchen sink that’s behind it my shops in Footscray near the station This was already installed by the previous tenants and it’s really messy

Need to have a sink installed in hallway of beauty salon as council now require it, we have a sink in back room hopefully to run from that sink into the hallway and run drainage back, to kitchen sink only 2-3m away, WE WILL SUPPLY SINK ONLY! You must supply pipes and connectors

Need a licensed Victorian plumber to install a stainless steel hand wash sink in my kitchen. ✅ Supply & install IKEA GRILLSKÄR sink unit (I will purchase, or you can supply) ✅ Connect to mains water (hot + cold) ✅ Connect to sewer drainage ✅ Install mixer tap (hot/cold) — I will supply ✅ Backflow prevention if required ✅ Compliance Certificate (Form 5) required 📍 Clyde North, VIC 3978 📅 ASAP — within 2 weeks 💰 Budget: (open to discussion based on scope) Requirements: - Victorian licensed plumber - Must provide Compliance Certificate (Form 5) - Please include your license number in offer Happy to share kitchen photos via chat after you accept. Thanks! 🙏

need someone replace old benchtop(steal) with ikea benchtop(timber) and install sink for me

Remove and install kitchen sink remove hot water service completely replace kitchen top and install new tap

A sink connected to hot and cold water and to the drain Hot water system installed Gas line extended and connected to the equipment fryer stove and kebab machines Open to offers

Plumber to install laundry sink and hook drainage up to main waste line which sits just outside. Fit off of tap too if you like.

Looking for a carpenter, cabinet maker or kitchen renovator to modify an existing laminate benchtop sink opening. Current situation: Existing sink opening approximately 1240mm x 430mm New black granite composite sink has been purchased and requires a smaller cut-out - 1160mm x 500mm x 200mm Existing opening needs to be reduced/rebuilt to suit the new sink Benchtop is laminate Cosmetic finish is not important as I will be vinyl wrapping the benchtops myself afterwards Scope of works: Remove existing sink Install support framing underneath as needed Rebuild/infill sides of existing sink opening Cut new opening to suit supplied sink Ensure benchtop is structurally sound and ready for sink installation Important: I am not looking for a plumber only. I need someone experienced with benchtop modifications, cabinet making or kitchen renovations. The benchtop will be wrapped afterwards, so the focus is on a solid structural repair rather than matching the existing finish. Please provide: Relevant experience/photos of similar work Estimated cost Availability

Looking for a qualified/licensed plumber and suitably experienced tradesperson to install a sink in a powder room. I want a recessed sink in the wall as no space behind door or in the room. There is a linen closet behind the wall where I want to place the sink, so that’s the reason for putting the sink in a niche, so I can take the room required for the sink from linen closet. All plumbing can be done under house. So pipe work can come up through floor in linen cupboard. There access with approx 700mm crawl space. Scope of works: • cut and form niche in wall for location of new sink. • Install new sink • Connect plumbing/waste services • Ensure neat and professional finish •Water proofing, tiling or advise. • Advise if any additional plumbing or wall modifications are required Looking for professional workmanship completed to Australian standards and compliant requirements — not a temporary/basic handyman fix. All qualified trades. See mock up photo for the idea of what I’m sort of looking done

New mixer tap installed in kitchen sink is leaking at isolation valve which has been replaced and still leaking.

loose connection between sink and tap i have bought sink kit from bunnings to fix

Need to replace a leaking bathroom basin pop-up waste/drain underneath sink. P trap is fine, it's the top metal part that has rust / grime. Nut and washer needs replacing. Task includes: Remove old leaking basin waste Install new pop-up waste Ensure all seals/washers are fitted correctly Test for leaks and ensure proper drainage

Sink has a long hair line crack

Hey I have chipped My bathroom sink by accident and I am needing to repair.. moving out and really overwhelmed on how I can fix it as I have been advised to

Need plumber tomorrow at 7am to fix sink that isn’t draining. It is either blocked or the pump isn’t working. If it is pump broken then you can quote to replace pump/fix pump