Find a professional blueboard contractor in VIC

Add studs so blue board can be attached to posts for the front fence.

Looking for a painter to prepare and paint the back of a blueboard fence Painter to stop up gaps in blueboard and fill screw holes Approx 20sqm Painter to supply paint - Bleaches Quarter Two coats required with dropsheets and no wash down on site as garden is completed

Supply Install Blueboard/13mm Sheeting (approx 2m2) Supply Install Tiles to best match existing (approx 2m2)

Supply and install blue board cement sheets For a carport wall (6 sheets) 4/2.4 2/2,7 Easy access

A small sheet of render has come off blueboard external wall and needs to be repaired. The damaged area is at the base of the 1st story wall of a 2-story townhouse (images provided). Thank you.

Cut into blueboard timber frame fence and install two letterboxes

I have a break in the rendered blue board on the front garden bed. Need some help with repairing this.

A section of blueboard (fibre cement sheet) has fallen off an external corner on the upper storey of my house (see first picture). The blueboard was originally added over exposed polystyrene panel ends at the corner junction when the extension was built around 15 years ago. It appears to have been adhesive-only fixed, which is likely why it failed. Scope of work: - Safe access to upper storey exterior (you'll need your own ladder/scaffolding) - Scrape back any degraded polystyrene surface to solid foam (it has been exposed for about a month) - Cut and fit new blueboard sheet to cover the exposed area - Fix with both construction adhesive and mechanical fixings (screws into frame) - Seal all edges with polyurethane sealant - Apply a skim coat of acrylic render to match surrounding finish on new board - not the whole wall - Painting is NOT included — I'll handle that separately While you're here I would like you to also seal the other corner (see last photo). Please include all materials in your quote. I am retired so flexible on timing. There is onsite parking.

Replace blueboard approx 2x2m in a wall opening.

Small job - the garage is currently a mix of blue board and render. Needs to be totally cement rendered to match house. Please make sure you’ve got tools and experience.

As seen on the photos the blue board has few cracks that need to be fixed and repainted.

1st Samsung Tv 40 inch into plasterboard. 2 nd LG Tv 42inch into wood strut. We need to buy the brackets first If you recommend a brand? It doesn’t need to swing or go up or down, just slim as possible to the wall. Thank Kate

Finish blue board and wood works …. Can pay day rate as have all the materials please let me know your thoughts

I’ve recently extended an existing 6m rendered planter box wall by approx 350mm in height using a timber frame and blueboard. I’m looking for an experienced renderer to render the new blueboard section so it matches the existing rendered finish and colour (Paperbark) as closely as possible. Scope of works - Render newly installed blueboard / lightweight wall section only - Match existing render texture and colour (Paperbark) - Small, tidy job. About 2 sqm. - Easy access and clear work area - Estimate half day work Requirements - Proven experience rendering blueboard - Supply own tools and materials - Neat finish required to blend with existing wall Timing - Urgent – ideally within the next few days

Render blueboard wall (2.92m wide x 2.6metres tall=7.6m2). Put mesh material between blueboard gaps. Texture finish in surfmist colour to match outside wall. Thanks

Demolish and remove a wall around a pool and near boundary fences in backyard. The wall is made of a timber frame and covered with blue board sheeting. The height is about 2.5 metres and the length is about 24 metres.

I have a blue board built fence that i need pulling down, tidied up and taken away. Great rear access for loading. Approximately 9 metres long

Wanting to build blue board wall and painted white, First 3 photos my backyard, Last pic is the inspo.

I have blue board which needs to be filled/ stopped up. Including all joins and screw holes I have attempted myself and started (see photos) and I need it finished. I have the joining tape and some joining compound but may need more. Job includes 1 x full sized wall(2 floor to sealing joins). , 1x 3/4 sized wall (1 floor to ceiling joins) 1x Nib wall (no joins just screw holes) and various small join around windows and doors One section is quite high so you will need a ladder/ platform No need to sand just go around filling

Started rendering the house and want to render this wooden pole (one pole at the entrance) Need someone to blue board / cement sheet it