Find a professional outdoor blinds contractor in VIC

I need a very small repair on an outdoor blind. The bracket has come down on one side so it now loudly bangs, the bracket is still on the runner. I've attached photos of both sides where it is still fixed properly (at the top) and where it has fallen down to the bottom. The window doesn't open on that side, so it will need to be repaired on a ladder. There is good access from the carpark below.

Our outdoor Ziptrak blinds have stopped working, we have tried all the troubleshooting steps with the remote to no luck. We believe the motors on the blinds may be dead

Outdoor blinds for two storey Victorian terrace. Old blinds, just want them down. Disposal not required. You will need your own ladder

Need an experienced handyman to assemble and install Bunnings outdoor roller blinds in my ground-floor backyard covered patio. Blinds and components already purchased. Includes mounting brackets, secure fixing and testing. Please bring tools and any required fixings. Photos attached. Installation only. Please quote your price and availability.

Hang blinds to windows of a 3 bedroom house Blinds will be provided

Need to put a cover on outdoor pergola

I have bought 2 No. 2.40m wide x 2.40m tall, Windoware Isle Roll Up Outdoor Blinds & I want to fit them within the framing of my decking & outdoor roof to block the harsh summer sun & heat. Job may need some framing timbers.

I need to out the electric curtain to cover my alfresco. 2 sides.

I’m getting electric outdoor blinds installed, and they need to be connected to the power supply.

Hang 2 x outdoor blinds. Coolaroo.

Outdoor blinds for wondows

Out door blind 2 m2 2 bw brougt clear

Roller blind width 1500 mm needs to be attached above window. Can be screwed into board under the eaves as in photo. A cleat for the cord needs to attached below into the bricks and also the hold downs for the blind.

Install 2 outdoor blinds on the front porch of my house. The blinds are: https://www.spotlightstores.com/en-au/p/sunplus-outdoor-shade-blinds/BP80670173-black

Update: Had a tasker assigned to the job, they have already mounted the side tracks. They had to travel because of a family emergency and are unable to finish the task. I need an experienced blind/shutter installer to mount two heavy, motorised outdoor zip blinds onto the solid brick face of my alfresco area ​Mounting System: This is a track-supported system. There are no top wall brackets. You must mount the two side tracks to the brick first, and then the heavy top cassette drops down into the top of the tracks. ​The Lift Height: The top of the tracks sit at 3080mm high. The main headboxes are very heavy and must be lifted over 3.1 meters high to slot down into the tracks. ​Equipment Required: You MUST bring a second person, a material lifter (like an SLA hoist), or a mobile scaffold to safely raise and guide the cassettes. ​The Surface: Mounting directly into the solid brick face. You must bring a hammer drill, masonry drill bits, and heavy-duty masonry anchors for the side tracks. (already installed, but may need adjustment for final installation) ​Electrical: Physical mounting only. You just need to route the exposed cables safely; a licensed electrician will be handling the hardwiring separately.

Need to install patio blinds 1 is 90mm and another 1 is 180mm

Install outdoor roller blind on pergola beam, St Kilda (Fri or Sat) Description: I need an experienced handyman to install a new outdoor roller blind on our rooftop terrace in St Kilda. The blind: Outdoor roller blind with aluminium hood, polyester sunscreen fabric, charcoal grey 3.0 m wide x 2.5 m drop Already on site, still wrapped, with the supplied fixings bag Product page: https://budgetawnings.com.au/outdoor-blinds/78-257-outdoor-roller-blind-with-aluminium-hood-polyester.html The job Mount the blind, hood and brackets to the front side of the front pergola beam, centred between the two posts (see photo, arrows show the mounting points) The beam is painted timber and about 2.5 to 3 m off the deck Make sure the blind is level and rolls up and down smoothly Fit any tie-down or side anchor points if the kit includes them What you'll need to bring A stable ladder suitable for a tiled terrace Drill, driver, level and any extra fixings needed for a timber beam Access Rooftop terrace on an upper floor, reached through the apartment. The blind is light enough for two people to lift, and it's already on the terrace. Plus I can help. When: tomorrow (Friday 2 October) or Saturday 3 October. Please say which day and time suits you. Please include in your offer: Your experience installing outdoor or roller blinds A fixed price for the full install Your available time

1 x outdoor blind installed onto brick for lounge window covering (see pic) - 2.4m width - have blind as pictured - crank arm outdoor blind.

We have just installed outdoor blinds that require a plug in motor. We need an electrician to supply a double power point to the ceiling of the alfresco area.

Due to the wind our blind came off tracks and needs to be re fitted bottom track and two side guides. The blinds are ZIPSCREEN OUTDOOR BLINDS electric