Find a professional gate installation in Inner South Melbourne

Installation of front gate, handle and hook up to intercom security

welding to attach the hinge to the post

Install cat gate on veranda/porch, preventing the cats from escaping Have no equipment or tools, nor the gate TENSION gate preferred (able to reverse it if needed) Examples below W 175 cm x L 200cm

Re-programming of front gate motor required. Ahouse brand. 4 remote controls to be re-synced. Flexible with dates/time.

Two paling timber side gates at a residential home. swing gates with latch on inside and outside. deadbolt lock at top inside gate. measurements roughly 182cm high. one side roughly 112cm wide. other side roughly 238cm wide. need to measure more accurately. we live 3 minutes from Bunnings Mentone. photos can be supplied.

Replace Front Picket Fence & Install Gate – Malvern Location: Malvern, VIC Job Type: Supply & install front picket fence + single gate Budget: Open to quotes Scope of Works I’m looking for an experienced fencing contractor to remove and replace the existing front fence with a new timber picket fence, including a pedestrian gate. Fence details: • Approx. 5.4 metres along street frontage • 2 metres high timber picket fence • 3-rail construction • Includes 200 x 50 timber sleeper at base (thicker sleeper required as plinth) • Posts to be installed behind the sleeper • Fence to be installed in concrete footings Gate: • 1 x single pedestrian gate • Steel frame • Steel latch post • Gate hinged off fence post (left side) Other details: • Letterbox will be supplied by owner, contractor to install (TBC) • Fence line is clear, however any trees/plants to be cleared prior by owner • Existing fence will need to be demolished and removed • There is concrete at the fence line – breaking concrete may be required (please note if this is included/excluded in your quote) What I’m Looking For • Experience with timber picket fences • Ability to supply materials or work with supplied materials (please specify) • Clean, professional finish suitable for a front façade / street appeal

Pick up 2 x gates and 1 x fencing panel from Oxworks, Dandenong south. Deliver to Bonbeach. 1 gate size is 1500mm x 1500mm. 1 gate size 870mm x 1500mm. 1 fence panel 700mm x 1500mm. 5 Poles 2400mm. 1 x box (hinges and locks). No photos, drawings attached.

Budget 6-7k Front Fence: Horizontal Aluminium Slat Material • Sliding Gate 3.9m x 1.5m height + Steel Beam strip footing • Sliding Gate Motor - run low Voltage Power for Motor with Transformer • Fence 8.8m x 1.5m Height with 100x100 Posts powder coated Side Fence: Timber paling Fence 6.5m x 1.95m Height + 1 Starter post Picture of what i would like shown. Send me your quotes.

Replace 5 pickets where I already bought them. Simply remove and replace screws (existing screws painted over and a bit busted)

Hi! I’m looking for an experienced bricklayer or handyman to help with the job shown in the photo: Job Details: • Remove the existing metal gate (no disposal required — we will keep the gate) • Brick up the entire opening to match the existing brick wall • Supply bricks and mortar • Provide a neat, aligned finish that blends with the current wall Budget: $500 Location: Bentleigh East Timing: Flexible within the next 1–2 weeks There will likely be additional work — looking for someone reliable who we can continue to use for the rest of the property. Please share your experience and any photos of similar brickwork.

need a new latch lock installed on a gate. latch lock will be supplied.

Please help us 2x install baby gates. Will need to bring a level and drills that can work on brick and wood. Some parts are already drilled into the wall, but we ran into difficulties. May also need to supply 8 flat head screws.

Need someone to install steel gate into brick pillar.

After a handyman to help with two tasks! 1. We’ve bought a Yale SL smart loco for the front door but unfortunately have an oval bore instead of the circular one this is fitted for. Hoping to get someone who can saw the bore to an appropriate size to install it! 2. Our front gate has been wonky on its hinges since we got the property - over time the top hinge has loosened and now the door need to be lifted and slammed just to get it open/closed. The posts are metal so we’re unable to redrill the hinge in ourself. Hoping for some help with this! Quite flexible with the timing, so please let us know if you can give us a hand with either task!

Needs 2 people I think. The verandah on ground floor has old corrugated plastic roof. Approx dimensions: Larger section 3x4m Smaller section 3x2m Unscrew from wooden frame Remove all & transport to tip

Pool gate isn't latching properly, I suspect the rubber in the hinge needs adjusting, happy to help if you need a second pair of hands. Bedroom door is also not latching properly, I need to lift the door for it to engage.

Side gate has detached from wooden fence. Need it fixed up.

Replace a gate handle to a wooden gate

Move the latch over on our front gate and install a lock

I've double gates - approx 3000mm x 1950mm high. - The frame is rusted in parts. - Hinges have given way, making the gate misaligned. - A few timber poles are jotting out. - Gate latch is broken and a new one needs to be installed. Requires some welding, some new timber installation. I've given an indicative budget here. Should you accept, happy for you to do a visit and adjust the price accordingly.