Find an experienced flooring expert in South East Melbourne

Need a spc flooring installed for new build house. On top of concrete slab. Herringbone pattern. Approx 130m2

Hi guys, I am near the end of knockdown rebuild, I'm looking for someone qualified professional floorboard installer for timber herringbone design. The builder has not installed the skirting but has provided them. The area is 116 sq meter. I need a quote for the installatioj job. Material will be provided Thanks

Remove carpet/ flooring from house and install natural oak hybrid flooring. Flooring is not supplied. Have highlighted what part of the house needs the new flooring on floor plan.

Hybrid Flooring Installation – Approx. 40–45m² Looking for an experienced flooring installer to install approximately 40–45m² of hybrid flooring in our home in Hampton Park. Job details: * Installation date: Friday 20 November 2026. * Hybrid flooring supplied by us. * Areas include living room, dining room, kitchen, hallway and entry. * Would also like the laundry included if the flooring is suitable for that area. * Existing flooring is tiled, and we would prefer installation directly over the tiles if the surface is suitable. * Installation to include fitting and finishing, including required trims and transitions. * Floor plan and photographs available. We receive the keys on 13 November, so the property will be accessible from that date. Please allow for the complete installation labour in your offer, based on approximately 40–45m² and the information provided. Looking for someone experienced, reliable and able to provide a neat, professional finish. Happy to answer any questions about the job through Airtasker before assigning. Thanks!

Looking for someone to install subfloor and hybrid laminate flooring in a empty Renault Kangoo SWB van. ​Area: ~2.5 to 3 sqm total space. ​Scope: Cut and fit plywood underlay to the van floor (including scribing around wheel arches), secure it down, and lay SPC hybrid laminate flooring over it. ​ Materials : Airtasker to supply plywood sheets. Hybrid flooring planks will be supplied onsite Tools Required: Tasker must bring their own jigsaw, saw, tape measure, and basic hand tools.

Lay laminate flooring in the areas marked in red in the attached floor plan. I will buy the materials. You measure, list what is needed, collect it, and install it. Areas: -Part of the Living and meals, kitchen, entry, walk-in pantry and walk-in linen -Master bedroom and master walk-in robe The areas where the floor needs to be laid has been highlighted in red in the attached floor plan Your job: -Measure on site and send a material list with quantities and a small waste allowance. Include laminate, underlay, trims, door transitions and fixings. -I will buy the items at Bunnings Clyde North-You collect the order from that Bunnings and bring it to the house. -Prepare the subfloor and install the laminate, underlay and trims. -Remove all offcuts and packaging, and clean the work areas afterwards. Rubbish removal and cleaning must be included in your quote. Please give one labour price that includes collection from Bunnings Clyde North, installation, rubbish removal and cleaning. Please advise your availability Thanks

Lay laminate flooring in the areas marked in red in the floor plan. I will buy the materials. You measure, list what is needed, collect it, and install it. Areas: -Part of the Living and meals, kitchen, entry, walk-in pantry and walk-in linen -Master bedroom and master walk-in robe The areas where the floor needs to be laid has been highlighted in red in the attached floor plan Your job: -Measure on site and send a material list with quantities and a small waste allowance. Include laminate, underlay, trims, door transitions and fixings. -I will buy the items at Bunnings Clyde North-You collect the order from that Bunnings and bring it to the house. -Prepare the subfloor and install the laminate, underlay and trims. -Remove all offcuts and packaging, and clean the work areas afterwards. Rubbish removal and cleaning must be included in your quote. Please give one labour price that includes collection from Bunnings Clyde North, installation, rubbish removal and cleaning. Please advise your availability Thanks

I need someone to lay laminate. I have done the prep work and have all the materials . Room is L shape with a bay window. Please bring looking for a quotes and fit asap

Replace and install new polycarbonate sheet over deck

Laying hybrid flooring in house.

Remove tiles from kitchen, carpet from lounge and install new floating floorboards

i need someone to remove my carpet and install clickable wooden floor boards

When: After the subfloor has been signed off dry. Materials will be bought once you confirm the list. Lay laminate flooring in rooms where wet timber flooring and carpet have already been removed and the subfloor has been dried. I will buy the materials. You measure, list what is needed, collect it, and install it. Areas: Living and meals (plan size 4.1 x 7.6 m), kitchen, entry, hallway, the space behind the kitchen and main bathroom, walk-in pantry (WIP) and walk-in linen (WIL) Master bedroom (3.4 x 3.6 m), master walk-in robe, and bedroom 4 (3.4 x 3.0 m) Your job: -Measure on site and send a material list with quantities and a small waste allowance. Include laminate, underlay, trims, door transitions and fixings. -Check whether the exposed subfloor is concrete or timber sheet, and tell me which underlay to buy. Do not choose the underlay until you have seen it. -I will buy the items at Bunnings Clyde North, 46S Hamersley Drive, Clyde North VIC 3978. -You collect the order from that Bunnings and bring it to the house. -Prepare the subfloor and install the laminate, underlay and trims. -Remove all offcuts and packaging, and clean the work areas afterwards. Rubbish removal and cleaning must be included in your quote. -The old flooring may already have been removed. If not,you will need to remove and dispose off the old flooring. Please note skirtings in your offer if they need replacing. Do not start until the subfloor is signed off dry. Please advise your availability Floor plan and damage photos are attached. Please give one labour price that includes collection from Bunnings Clyde North, installation, rubbish removal and cleaning.

We're is seeking experienced flooring installers throughout Melbourne to become preferred installation partners. We specialise in SPC, hybrid and laminate flooring supply and are looking to build a network of reliable installers. Benefits: Regular installation referrals Wholesale flooring pricing Builder and renovation work opportunities Flexible subcontract arrangement Ongoing project pipeline Requirements: Flooring installation experience ABN and insurance Own tools and transport Quality workmanship

Need someone to install, sand and stain a small 1 sqm footing. Tasmanian oak floorboards will be provided.

Require someone to prep the floor, lay the self leveling cement and polish to finish. Floor details. - Tiled (lay the self levelig cement over) - approx 3.5m x 3.5m

I need about 10 to 15 replacement hybeid floors replaced..i have the replacement boards.

Bedroom flooring works for a room approximately 3.00m × 3.20m, plus additional cupboard space. The vinyl flooring will be provided. Works include collecting the provided vinyl flooring from Dandenong Carpet Store, removing the existing carpet from the bedroom and cupboard area, and taking away and disposing of the old carpet and associated rubbish. The vinyl is to be measured and cut to suit the bedroom and cupboard space, with the floor prepared as required before installation. Install the supplied vinyl flooring neatly throughout the bedroom and cupboard area. All removed carpet and rubbish are to be taken away and disposed of appropriately upon completion.

Install floor boards, I have bought the boards. 62 sq. meters

Install 3.3 x 3.6 small room with laminate flooring. All laminate flooring and underlay at site, just needs installation with relevant materials. Shouldn’t take too long to complete small job

Sand and polish wooden floorboards

I need to clean and polish the deck to make it looks great. Dimensions 1200cm x 500cm (measured)

There are scratches and damage to the timber floor of a single story house on stumps. Please refer to the pics attached. The work requires sanding followed by polishing. Can you provide a repair quote including all the required materials. The patches are scattered over an area of area of approx 1 m wide x 3 meters long. The complete floor area is 15 approx square meters( 5 meters long x 3 meters wide). We need the complete floor area of 15 square meters sanded and polished. Could you please provide me the quote and advice if we can achieve the same colour and as well as the duration of the complete job. We would ideally like this completed over the next weekend.

Need to polish the wooden floorboards in 3 bedroom and hallway.

Require someone to prep the floor, lay the self leveling cement and polish to finish. Floor details. - Tiled (lay the self levelig cement over) - approx 3.5m x 3.5m

Hello All, I thought to replace the floor but very pricey. Would you guys able polished/Laminated this floor? i have got some Vinyl floor? and vinly tiles i believe

150sqm sanding polish floor boards

The wooden floor in 3 areas in the house needs to be sanded and polished and the leak fixed

Remove existing stair carpet and underlay. Carefully remove all staples, carpet gripper and adhesive. Sand exposed original timber stair treads/winders back to clean timber. Repair minor holes/damage where required. Sand and refinish all timber treads and nosings with 2–3 coats of durable, non-yellowing stair-grade polyurethane. Keep existing white risers, stringers and trim untouched. Protect surrounding walls and floors. Dust-controlled sanding preferred. Remove all carpet/rubbish

3 bed rooms, one living room and one corridor wooden floorboards. Looking for sanding and polishing please

I'd like to request a quote for polishing my wooden floor, which I've included a picture of along with its dimensions. Could you please ensure that the dust is vacuumed during the polishing process to prevent it from spreading.

provide me with a quotation for the sanding and repairs to these floorboards. Red line are where walls have been removed and floors will require repairing Black areas wont need to be done We are after a saturn natural finish. Area is approx 132 square meters

I need a quote for 300sqm sand and polish hardwood

Need to sand and polish existing work out wooden floor boards

We’ve had a stain show up on on our floor and have tried some chemicals to remove it but nothing has worked. If this is in your wheelhouse, do you think you can quote me for a sand of this and repolish as best you can to match the rest? Area of f house is kitchen entry, job in Mount waverley and it is a Tasmanian oak floor

Need floors re sanded and polished but require a light grey color if possible I don’t want this yellow look 3 bedrooms have carpet which I’ll remove floors still new underneath looking for per square meter rate

I need floor boards sanded and polished in main living room dining room and hallway

Polish required for kitchen and living area Total area :20sqm area approximately

New kitchen just installed so need to sand and polish the floor. Room 7.5 x 3.5m 21m2 . Prefer polycure 2pac finish to match the rest of the house. Would like a sand asap and the caosting put on after easter if possible.

Need help with deck polish in alfresco and porch area. Affreaco 6m x 4m Porch approx 6 sq

Looking for an experienced professional to sand and refinish approximately 100 m² of existing Tasmanian oak flooring in an empty, single-storey house in Glen Waverley. Areas included: Living and dining areas Small butler’s kitchen Laundry Hallway Three bedrooms Bathrooms are excluded. Work required: Professional sanding to remove the existing coating and renovation marks Proper dust-extraction equipment Minor filling and floor preparation where required Three-coat professional water-based finishing system Natural matt or satin appearance Clear finish with no staining required The preferred product is Synteko Pro, Synteko Top or an equivalent professional-grade, single-component water-based flooring finish. Please specify the exact product proposed. Oil-based finishes will not be accepted. Significant board replacement or repairs must be identified and quoted separately before commencing. The house will be empty and the floors cleared. Current photographs are attached. Work must be carried out and completed on 24 /25 September 2026. Budget: $3,500, including labour and materials.

I am seeking an experienced and professional flooring specialist to complete a high-quality refinishing of my indoor solid hardwood flooring and spiral staircase. This project requires proper equipment, attention to detail, and the ability to deliver a smooth, uniform, premium finish. Scope of Work 1. Timber Floor Refinishing (Approx. 40 m²) Sanding & Surface Preparation Fully sand timber floors back to bare wood using professional-grade sanding machinery Precision edge sanding and detailed finishing at corners, skirting boards, and transitions Surface preparation including: • Filling minor gaps where required • Smoothing sanding marks and imperfections • Levelling surface to ensure an even base prior to coating 2. Application of Premium Clear Coatings Apply 2–3 coats of high-quality, non-toxic, water-based clear varnish Light sanding between coats (if required) to achieve a smooth, uniform finish Materials can be supplied by me, or you may provide a quote inclusive of all materials and labour 3. Final Protective Seal Apply a final non-toxic protective sealer for enhanced durability and scratch resistance Ensure a consistent, even, high-quality finish across the entire floor area Maintain and highlight the natural timber grain and tone 4. Spiral Staircase Refinishing (14 Timber Steps) Careful machine or hand sanding of each step, including treads and risers Precision detail finishing on edges, corners, and curved spiral sections Application of matching varnish/stain and final protective sealer Consistent finish to match the main flooring area Extra attention to drip prevention, smooth transitions, and edge accuracy Additional Requirements: Use of dust-minimizing sanding equipment preferred Clean and tidy workspace during and after completion Professional workmanship with consistent coating results Clear communication throughout the process Option for on-site inspection before finalizing the price

Sand old polish off and refinish floor boards in one medium sized room, one small room, small corridor and small foyer

Hey there, my name is Jeremy . I need to hire a handyperson to help me in Noble Park VIC, Australia. What do you need done? Floorboard sanding and polishing in Noble Park What is the type of property? House Which areas of the property need work? Roughly >100m2 What would you like the handyperson to work on? Hiring a machine to sandback flooring and polish either entire floor with spot treatment. Thanks in advance! - Due date: Flexible