Find an experienced flooring expert near you

I need underlay and laminate flooring installed, quick step perspective nature (approximate 20m2)in bedroom

We have 90 sqm of engineered timber flooring we need installed. It is click connect and we want it glued with 3 mm rubber underlay.. 1/3 of jobjis on new yellow tongue downstairs. Rest is 3 bedrooms upstairs on similar floor. Us 2sqm landing and 1sqm landing. Landings connect to upstairs bedrooms

I have 50 Sqm of hybrid flood boards to install and add scocia. Remove old laminate floor boards and remove old scocia. Have ordered floor boards and they will arrive in 3 weeks

I have all the equipment I just need someone to lay the floorboards down on top of the underlay . They are hydbrid.

I have steel already installed. All timber onsite ready to go. Joists have been templated and cut ready for steel I beam slide in. They need to be cut to size after pole plates are installed. All glue and fixings as supplied. Previous installer has had to cancel install due to a death in his family. Tasks. Pole plates installed Measure out for joist boots and install. Joist install then floor glue and install. We have stairs going in on march the 31st. Mezz needs to be completed by then.

-Replacing carpet with laminate 183*23*12mm timber flooring -floor size is around 60 m2

Installation of laminate floorboards, plus builders plastic and underlay below. Installing in 2 medium sized bedrooms. Open to discuss pricing

Lay down vinyl flooring in new dwelling, smallish living area and one bedroom, needs a moisture barrier painted on then glue down the flooring

Install floor trim under front door to ensure door doesn’t get caught on floating floorboards when they swell with heat and moisture.

Qualified floorboard installer needed for a ensuite (includes a walk in wardrobe). All materials will need to be included. -Floorboards -Underlay -Scotia -Door transition strip. Can organise a day for a quote/consultation and then set up a day for it to be completed. The room will need to be completed to a similar color to the rest of the rooms. Hoping to have one day for consult and day two for work and completion.

I have 9 sq m of hardwood flooring that needs to be laid over new sub floor. It's 12mm tongue and groove hardwood. I have the new boards. I'm after a professional carpenter/ flooring installer. You will need your own secret nailer. If you can sand and Seal too please let me know. Existing is poly matte finish.

I’m converting a small storage room into a study nook and need floorboards installed to cover an exposed concrete subfloor where built-in cabinets were recently removed. The job involves three tasks: 1. Lay Floorboards ∙ Install supplied (matching) floating floorboards to match the existing light timber flooring in the adjoining area ∙ Boards need to butt up neatly to the existing flooring at the threshold ∙ The subfloor is bare concrete with some old adhesive residue from removed cabinetry – light prep/levelling will be needed before laying ∙ Please bring underlay – I don’t have any on hand 2. Install Skirting Boards ∙ Install supplied skirting boards around the perimeter of the are as shown in the photos to finish the floor edges clean 3. Patch Holes in the Wall ∙ There are a few holes and damage spots in the walls left over from the cabinet removal ∙ Please patch and prep the walls ready for painting – I will do the painting myself, so just needs to be sanded smooth and ready to go. I will supply the filler for the wall patching. This is a relatively small task for someone that knows what they are doing.

New office pods need floorboards installed. Each pod 2.8m x 3.2m. I will provide floorboards (6mm Hybrid Waterproof), you bring tools.

Hi, I renovated 15 yeas ago. Having carpet layed in my bedrooms. At the time the floor boards very soft in areas and the builder laid some type of tin product over parts on the floor …. I didn’t need new boards in the bedrooms. Now… I can feel a floor board is broken in another area. Hoping the carpet can be lifted and the area fixed.

Remove carpet and install Bunnings vinyl floorsheets on 48sqm. All furniture has been removed. Vinyl floorsheets already supplied. Vinyl floorsheet model is - Senso 2m Rustic Wood DIY Practica Sheet Vinyl One room already has carpet removed. See floorplan. Additionally - Remove carpet only from approx 30sqm of other living areas to expose existing jarrah wood underneath. No floorsheet installation required on this. All furniture has been removed. Floorplan with instructions has been uploaded to the image section of this task.

Supply install hybrid flooring floor plan provided and the area you have outlined, the carpeted zones for replacement are the living area, dining area, and both bedrooms. Kitchen, bathroom, entry, and balcony are excluded. Calculated areas are as follows. Living 3.8 × 2.8 = 10.64 m² Dining 2.1 × 2.8 = 5.88 m² Bedroom 1 2.6 × 2.3 = 5.98 m² Bedroom 2 2.6 × 2.8 = 7.28 m² Subtotal (floor replacement area) 29.78 m² For supply purposes, carpet should always be allowed with a cutting and waste margin. Recommended allowance (10%) 29.78 m² × 1.10 = 32.76 m² Allow 33 m² of flooring for replacement.

Details: • Install 6.5mm hybrid flooring in a single room • Room size: 6 sqm • Floor is flat and ready • Hybrid flooring will be provided

Roughly 15-20 m2 out door area of new built. Wanting composite decking done. The asked price is not actual. Will negotiate and come to agreement upon discussion. The dirt in photos will be removed and the ground will be graded. Looking for someone to install the frame and composite decking.

I’m looking for an experienced flooring installer to install laminate floorboards in a single room. The existing floor is a raw concrete slab, so the job will require checking flatness/levels and preparing the surface as needed before installation. Scope of work: • Assess concrete slab for flatness/level and moisture • Advise if any spot levelling or preparation is required • Supply and install appropriate underlay / moisture barrier for concrete • Install laminate flooring with correct expansion gaps • Neat cuts around walls and doorways • Install quad / scotia to cover expansion gaps (or advise if skirting removal/refit is recommended) • Clean up after completion Flooring: • Santos Mahogany laminate floorboards from Bunnings • Happy to supply flooring and materials, or installer can include them in the quote (please specify) Room details: • One medium-sized room (games / study room) • Currently bare concrete slab • Room will be cleared of furniture before starting • Room is separate from the main living areas of the house, with easy access Timing: • Ideally completed in 1 day • Up to 2 days if levelling or additional prep is required • Flexible on dates this week What I’m looking for: • Experience installing laminate flooring over concrete • Familiarity with moisture barriers and slab preparation • Own tools provided • Examples or reviews appreciated Please include in your response: • Your flooring experience • Whether your quote includes levelling (if required) and underlay / moisture barrier • Estimated time to complete the job

I need someone to come and install 60m2 of hybrid flooring in our home in Maylands. Photos attached with old flooring and a floor plan attached. I will be removing all the old flooring so it will just be the slab ready to go. New hybrid flooring is already purchased and here ready to go. Will also be reusing the current scotia. On the floor plan it’s just the Living, Kitchen, dining, storeroom, and the small hallway outside the L’dry and Bed 2

Small office in Sydney CBD with four meeting rooms and an open area. Task is to clean and polish aluminium skirting boards around the office. Steps: • Clean metal skirting • Remove marks or residue • Polish, wax and buff Products will be supplied. Needs to be completed before 5pm Sunday. Easy access office building with lift.

Need deck polishing Other minor works

Sand and polish flooring in our dining room.

Approx 20m2 of polished baltic pine needs another going over as it's looking a bit weathered and worn. Kitchen, hallway and study area that are all linked and easily accessible. Boards are in good condition. Straightforward job.

Commercial space needing cement floor levelled and polished- roughly 100sqm

Looking for quotes for sanding and polishing timber floors with a water based clear finish Two bedrooms, narrow hallway and living area totaling 50 square meters

Looking for somebody to sand and polish the existing Tasmanian Oak and Radiata Pine floors in a current project. Approximatly 105m2 m2 of floor which requires sanding and polishing and 14 stair treads. Requires waterbased polyurethane Matt finish on the floor and Anti slip coat will be final coat on the steps. Requires somebody that is experienced and has previous projects they can provide with references. The house is vacant and clear for the works. Looking for the task to be completed in around 2-3 weeks.

I need my floors sand and polish with water based matte polyurethane Not including bathroom and toilet

Need sand & polish for timber floors for 5 bedrooms.

I have recently vacated a rental property in Lane Cove. There has been some damage to an engineered timber floor caused by a rolling desk chair - I have attached photos. The property manager has confirmed that the owner does not want to treat the whole floor - I just need a quote to repair this patch and tie in as best as possible with the remainder of the room. Thanks!

Sand and polish 40sqm of wooden deck and coat with sealer. Must have own equipment.

Floors were cork, all cork and Masonite have been removed except around cabinets in kitchen. Need someone with access to a toe kick saw to cut the cork boards under the kitchen cabinets, I can remove cork and staples myself. From there I need someone to sand and polish the floors.

sand and polish an existing timber floor in a two bedroom unit

Sand and polish around 40 Sqm fooor

I need an experienced flooring professional for a two-stage job in my kitchen in Aspley (QLD). Stage 1 – URGENT (before 17 Feb): • Remove existing cork flooring and cement sheet underlay • Deal with nails/staples properly • Leave timber boards clean and ready for kitchen renovation This part must be done before 17 February. Stage 2 – After kitchen renovation: • Sand and polish the timber floor • Match the finish to the rest of the house (appears gloss, but to be confirmed) • Open to professional advice on finish type to ensure a good match Area size: Approx. 2.4m x 2.4m What I’m looking for: • Experience with older timber floors • Own tools and sanding equipment • Ability to match existing floor finishes • Clean, professional workmanship Kitchen renovation is underway — sanding/polishing will be scheduled once installation is complete.

Looking for someone to remove lino and sand/polish floorboards.

Need to sand and polish 5 bedrooms, two living , rumpus , walkways. Need to retain the patterns. Refer to photos

Need a sand and polish of 27 sqm of wood flooring

Area is roughly 110m2, looking someone who can give quote.

Remove carpet, sand and polish floorboards underneath. Dispose of carpet. Tools to be supplied by you. 2 bedrooms only, 27sqm in total.

We are putting our house up for sale and need some help replacing with some damaged floorboards. And also stopping other floorboards squeaking in the hallway. There are some other odd jobs I'd love some help with. We can discuss if we meet up.

Want a slightly darker/less orange colour that will not show as much dirt and not scratch so easily. The treatment on the floor currently is not enough for the foot traffic we get in the store. Scratching in one room but minimal scratching in the other. Both about 6x4 rooms

We have Baltic pine floorboards that need refinishing (sanding and polish) They are currently overlaid with vinyl flooring which will be removed before works commence 2 rooms at roughly 30sqm total

Looking for someone to sand back and refinish my outdoor timber bench seat, then seal it with a durable natural matte finish. Bench seat is removable and can be taken away to complete off site. I would like pickup and return included. Size Approx 3.0m long x 0.4m wide. Finish required Natural matte, low sheen. Prefer the most durable option for outdoor use. Happy to follow your recommendation, but I am leaning toward a quality exterior decking oil in a natural matte finish for longevity and easy maintenance. Scope of work: - Transport off site - Sand back to an even finish (top and edges, tidy up the ends, bottom if needed) - Prep and clean properly before coating - Apply stain if needed to even out colour, otherwise, clear natural is fine - Apply exterior grade protective finish in natural matte (2 to 3 coats as required, coat all faces including: top, edges, and ends and bottom if recommended) - Return Please include in your offer • Total price including materials and pickup and return • Product system you will use (brand and type if possible) • Estimated turnaround time • Photos of similar outdoor timber refinishing work Timing Flexible, ideally within 7 to 14 days.

We have removed the carpet from our staircase, and it need sanding and refinishing. Total 15 steps Pls send me your quote price

Refinishing of timber floors (downstairs) in a Reservoir townhouse. Approx 40m2. Refer floorplan I've highlighted in blue the extent. There are some gaps between boards that need to be filled in a few areas. Sand and refinish floors to new condition. Use hardy sealer / polyurethane coat. House has been recently painted and new carpets etc so dust suppression must be used.

I have approx 35 square metres of floorboards that need sanding back to bare timber. I don’t need them refinished as we will do that.

Looking for an experienced tradie to fully sand back and properly refinish internal timber stairs. Anytime between 20th and 25th Jan Details: Approx 14 timber treads (including winders) Existing finish is worn on nosings with a few scuffed areas 2 small gouges to be repaired with timber filler Require full sand back to bare timber (not just a light scuff) Refinish with a high-quality stair-grade clear varnish or polyurethane Minimum 3 coats, suitable for stairs (durable, non-yellowing) Materials to be supplied by you and included in the price Clean, tidy job with proper prep and cleanup Please include in your offer: What product/finish you will use (brand + water/oil based) How many coats Estimated timeframe and drying time between coats Examples of similar stair work if available Home is occupied, but I will be out each day, however walls have just begun painted , so clear communication and care with dust and drying is important. I’ll check quotes later today, will reply then.

I need a small section of timber floorboards (doorway area – see photos) sanded back and refinished to match the surrounding treated floorboards as closely as possible. The area was previously covered by tiles and has old adhesive/paint residue and uneven finish. I’m after a professional result that blends in with the existing floor. Scope of work: • Sand back the existing timber boards to bare timber • Remove all residue/old finish • Prepare surface properly (fill if required) • Stain/colour match to existing floorboards • Apply suitable clear protective coat (polyurethane or similar) • Clean up after job • Supply and apply all required materials Details: • Area size: approximately 1100mm x 1100mm • Location: indoor hallway / door threshold • Access is easy • Photos attached Requirements: • Experience with timber floor sanding & finishing • Own tools and materials preferred • Ability to colour match existing floor as close as possible

Hi there! I'm looking for someone to restore the back deck of my house in Heathmont, Melbourne (approx. 22m2, including steps and balustrades). The job includes: Sanding the deck back to bare timber (currently weathered/old finish) Smoothing edges, steps, and tight spots Cleaning & preparing the surface for finish Applying deck oil or stain (supplied or agreed upon) Requirements: Own equipment (random orbital sander, vacuum attachment, brushes/rollers) Experience with timber decking restoration Ability to complete efficiently and neatly Reliable, punctual, and professional Timing: Flexible - hoping before Christmas but understand if that’s not possible. Payment: Open to quotes. Please provide your estimate

Approx 26,60sqm of decking needs to be sanded down and refinished at my place. Divided in 2 different areas (front and back balconies). Easy access, floor level, timber in fair condition, no damage. Please send me an estimate or quote. Needs to be done before end of Jan 2026 but as soon as possible really. Cheers.

I am seeking an experienced and professional flooring specialist to complete a high-quality refinishing of my indoor solid hardwood flooring and spiral staircase. This project requires proper equipment, attention to detail, and the ability to deliver a smooth, uniform, premium finish. Scope of Work 1. Timber Floor Refinishing (Approx. 40 m²) Sanding & Surface Preparation Fully sand timber floors back to bare wood using professional-grade sanding machinery Precision edge sanding and detailed finishing at corners, skirting boards, and transitions Surface preparation including: • Filling minor gaps where required • Smoothing sanding marks and imperfections • Levelling surface to ensure an even base prior to coating 2. Application of Premium Clear Coatings Apply 2–3 coats of high-quality, non-toxic, water-based clear varnish Light sanding between coats (if required) to achieve a smooth, uniform finish Materials can be supplied by me, or you may provide a quote inclusive of all materials and labour 3. Final Protective Seal Apply a final non-toxic protective sealer for enhanced durability and scratch resistance Ensure a consistent, even, high-quality finish across the entire floor area Maintain and highlight the natural timber grain and tone 4. Spiral Staircase Refinishing (14 Timber Steps) Careful machine or hand sanding of each step, including treads and risers Precision detail finishing on edges, corners, and curved spiral sections Application of matching varnish/stain and final protective sealer Consistent finish to match the main flooring area Extra attention to drip prevention, smooth transitions, and edge accuracy Additional Requirements: Use of dust-minimizing sanding equipment preferred Clean and tidy workspace during and after completion Professional workmanship with consistent coating results Clear communication throughout the process Option for on-site inspection before finalizing the price

Existing timber floor requires sanding back and refinishing with water based coating system. Approx 147m2 in total Quotes welcome

Timber floor in loungeroom refinished.

Wooden floor sanding and refinishing

1 bedroom, hallway and living area to be sanded. Carpet will be removed prior with wooden floors premopped. Floor boards look in good condition and clean. But some patches of glue from the carpet underlay.

We need a floor sanded and refinished in Wynnum - about 14m2

Floorboards need refinishing - looking for quotes

Two adjoining rooms have hardwood floors. We have taken up the carpet and tiles that were covering it and we now want to bring the floors up to the same as the rest of the house. Please quote for one square meter on AirTasker and then we can come to an agreement on the final amount (approx 30 sm) First picture shows the floors in the rest of the house. Second and third pictures are the floors that need to be finished.

Recently removed carpet from hardwood floor which needs to be refinished. Two bedrooms (10.5 sqm each) plus hallway (~3 sqm). Will add photos shortly!