Find an experienced flooring expert in South East Melbourne

Experienced Carpenter Needed to Assist with Composite Deck Installation Looking for an experienced carpenter or decking installer to help build a composite deck at a residential property in Oakleigh East VIC. I will assist with labour but need someone experienced to guide the installation, bring tools and handle most heavy lifting. PROJECT Rear deck approx 37 m² Front deck approx 7.5 m² Total approx 44–45 m² Raised platform about 300 mm high with one step down. Composite decking boards with straight runs (no picture frame border). Likely freestanding frame over existing hard / soft surface. SCOPE • Build and set out timber subframe • Ensure frame is square and level • Install composite decking boards with clip system • Assist with step framing and finishing TOOLS Please bring standard carpentry tools (drop saw, circular saw, drill/impact driver, level/laser). MATERIALS I am sourcing boards but happy to purchase through you if you can get better trade pricing. TIMING Approx 2–3 days work. Please respond only if you have installed several composite decks before. Include experience, photos of previous decks and your day rate.

If it’s easier you can offer to come and provide a quote but give me a ballpark of the cost in your offer. Hi, I’m looking for an experienced decking contractor to supply and install a Spotted Gum timber deck in my backyard. Details • Location: Oakleigh South, VIC • Size: ~28² • Finish: Picture-frame border Finish: Sand + apply UV-protective penetrating decking oil (tinted to match the attached brown colour reference). No film/varnish coatings. • Area: Existing patio area, decking to be extended up to the shed • Steps: Will need some steps included Photos attached • Colour sample/reference photos (brown tone I want) • Photos of the patio area and where the deck will go Task includes • Measure up and confirm final size/levels • Supply all materials (boards, subframe, fixings, etc.) • Build/install subframe + decking • Install steps as required • Sand and oil to match the colour reference • Remove all waste/clean up Please comment with: • Your quote (materials + labour) • Estimated start/finish timeframe • Photos of similar decking jobs you’ve done

Installation of hybrid wooden planks. Total area is around 110 square meters. There is a carpet. So remove and dispose carpet before installing hybrid wooden planks.

I’m looking for someone reliable to install 20 real estate open boards every Friday and collect them on Saturday after 5pm or Sunday. Boards must be placed in the same locations each week. This is not a one-time job — I’m looking for someone long-term, minimum 6 months to start. Payment: $60 per week. If you’re reliable and available every weekend, please get in touch.

To remove existing carpet, dispose and install Hybrid floor boards in hallway (15sqm), No furniture to be moved Floor boards will be supplied

Remove existing flooring(May be laminate). Dispose it Supply an Install hybrid flooring. The area is approx 75sqm. I would like a turnkey solution. Please name the type and brand of the product you are using.

1. Install front door with new hindges. Remove existing door 2. Install hybrid floor boards in the kitchem top of the tiles. Area is 8 sqm.

Looking for an experienced person to assist with installing hybrid flooring (approx. 30sqm). We are supplying all hybrid flooring materials. This is not a full-service contract job. I have some experience myself and need someone skilled to help move the job faster and properly. Important: This is hourly work, not per square metre. Initially booking for 4 hours, paid at an agreed hourly rate. Ideal for someone experienced in flooring who wants extra cash. Please do not apply if you are a flooring company quoting per sqm. This is strictly hourly assistance only. You must: Have solid hands-on experience installing hybrid flooring Know how to prep, cut, lay, and finish properly Work efficiently and independently

Need 2 meters wood flooring in the kitchen area, possible polishing the whole house if the price is right

See floor plan attached - need the change as mentioned for room-1 to room-4. Please quote the labour only.

Hi, I’m looking for the most affordable quote for supply and installation of laminate flooring in Pakenham around 6th March. Job details: • Approx. 75–85 sqm total • Areas: kitchen, hallway, and two living areas • Install over existing flat tiles (no removal required) • Bedrooms, bathrooms, and laundry not included • Looking for 8mm laminate in a light/medium natural oak colour similar to “Marina Oak” Finishing: • Want the most cost-effective option • Happy to use basic scotia/quad along edges instead of replacing skirting to keep costs down Please quote: • Best price per sqm INCLUDING materials + installation • What laminate brand/range you would supply at that price • Whether underlay is included • Availability close to 6th March Main goal is a clean, simple install at the lowest possible total price.

I have prepared the room ready for the boards to be layer we have the stock here

Need to carefully remove current Hybrid Planks and re-install them correctly. I need to change the current installation. Need to re-use already installed planks, if need more Hybrid planks it will be supplied. It would be a very quick job for an experienced person as the room is small

Install 70sqm downstairs in existing house and 60sqm upstairs in new renovation. It’s to be clued down. Also need 9sqm of clue removed from already removed floor tiles.

I’m looking for an experienced flooring installer to install both hardwood flooring and SPC flooring at a residential property. Scope of works: 1️⃣ Hardwood Flooring Area: approx. 60 m² Stairs: 12 steps + 6 winders - manufacturer supplied nose but need to trim to size Board size: 910 x 125 x 18 mm 2️⃣ SPC Flooring Area: approx. 85 m² Board size: 230 x 1570 x 8 mm - Click and lock system Underlayment required to be installed underneath Stairs: 23 steps + 9 winders - Glue with edge trims - Tx t m0b more detailed O4️⃣ O2 Peter 5️⃣🎱6 Yu 92🎱 Installation areas: Ground floor – concrete slab Stairs - steps and winders (where the stairs turn) First floor – floorboards Materials: - Flooring materials and underlayment supplied by owner. - Installer to supply own tools, fixings, adhesives, and consumables Location: - Clayton - Price for reference only. Negotiable cash please. Requirements: - Proven experience with hardwood flooring and SPC flooring installations - Ability to prepare subfloors properly (levelling, moisture checks if required) - Attention to detail for clean cuts, transitions, and finishes - Trim out flooring if corner is not good - Reliable, punctual, and professional Timing: Flexible – can be discussed with the right installer

I have the wooden panels & material required for the job. I just need someone to come in to install it

We need to remove the carpet and replace it with laminate flooring. We are open to labour only, or supply and install. 1 bed room - around 12 sqm Jobs need to be completed in 1-2 days once started, as there are furniture in the room that needs to be removed and put back afterwards. Looking to complete it before Christmas.

Hi John happy to help install the flooring for 4 hours tomorrow. Offer for myself only. Thanks Michael :) - View all the details of this offer: https://www.airtasker.com/offers/01K9K4W9DAZZF41VFRM4J34KGX

Lay ikea Runnen floor panels in backyard. Total space is 6.5m x 3.5m. Will need to cut edges to fit to space and rubber mallet to click into each other.

If you need to inspect, it can be arranged after 22nd September. The floor space is roughly 160sqm (floor plan attached). Currently, part of the house is carpeted and the rest is old timber flooring. Advice on material selection will be greatly appreciated.

I need old tiles and cement sheet ripped up before 16th march. New kitchen being installed then a sand and polish the floor. Room 7.5 x 3.5m

I’d need the house wooden floor to be fully sand and polished with two coats, this is solid wood

I need my wooden floor to be polished as there are few scratches here and there

Need a small area approx 10-12m2 living/dining room and study nook area sanded and polished Stain to match Whats currently there now (cherry rich colour) Need done by someone who has experience with flooring and has the equipment! NO COWBOYS!

Wooden floor needs to be repaired, sanded and polished. The damage was due to some moisture but that has been fixed.

Im looking to polish the floor of my house (not sand and polish just polish). There are minor scratches on the floor, so looking to have some of that covered with polish, but mainly looking for it to shine. Area coverage is 67m2. I also want to do samr with stairs which has 6m2 coverage.

Needs to sanding and polishing around 25sqm of timber floor(spotted Gum ) for our home in Berwick . Inspections are welcome if required.

Decking to be polished back and front of house.

Floor sanding and polishing. Area approx 4x2.7 meters

I have timber flooring that had carpet, we removed it recently and want the sanding and polishing. Room size approx 4x2.7 meters. Attached are photographs

Need to sand and polish 5 bedrooms, two living , rumpus , walkways. Need to retain the patterns. Refer to photos

Need to polish 9x4.8 living room.

Looking to sand,polish,fill and fix any damaged jarrah flopr boards.. Ground floor approximately 14 m2.

Needing solid timber floors sanded and polished.

Remove carpet in living area . Prepare the area for timber polishing and paint .

Hi, I’m looking for an experienced flooring professional to sand, repair, and polish my timber floors. There is currently no furniture in the house, and task needs to be done on ground floor only. The job includes: - Sanding existing timber floors - Fixing any gaps, cracks, dents, or damaged boards - Applying 3 coats of oil based polish. Ensuring smooth, even finish throughout Floor area: Approx. 90 m² Floor condition: Good with some scratches You’ll need to provide: - Professional sanding equipment - Materials/products for filling and polishing Timing: Flexible — ideally completed between 10 Dec and 12 Dec.

I am seeking an experienced and professional flooring specialist to complete a high-quality refinishing of my indoor solid hardwood flooring and spiral staircase. This project requires proper equipment, attention to detail, and the ability to deliver a smooth, uniform, premium finish. Scope of Work 1. Timber Floor Refinishing (Approx. 40 m²) Sanding & Surface Preparation Fully sand timber floors back to bare wood using professional-grade sanding machinery Precision edge sanding and detailed finishing at corners, skirting boards, and transitions Surface preparation including: • Filling minor gaps where required • Smoothing sanding marks and imperfections • Levelling surface to ensure an even base prior to coating 2. Application of Premium Clear Coatings Apply 2–3 coats of high-quality, non-toxic, water-based clear varnish Light sanding between coats (if required) to achieve a smooth, uniform finish Materials can be supplied by me, or you may provide a quote inclusive of all materials and labour 3. Final Protective Seal Apply a final non-toxic protective sealer for enhanced durability and scratch resistance Ensure a consistent, even, high-quality finish across the entire floor area Maintain and highlight the natural timber grain and tone 4. Spiral Staircase Refinishing (14 Timber Steps) Careful machine or hand sanding of each step, including treads and risers Precision detail finishing on edges, corners, and curved spiral sections Application of matching varnish/stain and final protective sealer Consistent finish to match the main flooring area Extra attention to drip prevention, smooth transitions, and edge accuracy Additional Requirements: Use of dust-minimizing sanding equipment preferred Clean and tidy workspace during and after completion Professional workmanship with consistent coating results Clear communication throughout the process Option for on-site inspection before finalizing the price

polished concrete flooring in garage. it’s already concreted needs to be buffed rocks added and materials to be polished

Hi, I’m looking for a professional to sand and polish the hardwood floor. The area is about 27 square metres, in good condition but with scratches. I’d like the floor to look more even and refreshed — open to advice on finish (matt, satin, or gloss). Please provide a quote including materials and labour. Located in [Oakleigh]. Flexible with dates.

Scratched floorboard needs polishing. Need done as soon as possible.

I am seeking an experienced and professional flooring specialist to complete a high-quality refinishing of my indoor solid hardwood flooring and spiral staircase. This project requires proper equipment, attention to detail, and the ability to deliver a smooth, uniform, premium finish. Scope of Work 1. Timber Floor Refinishing (Approx. 40 m²) Sanding & Surface Preparation Fully sand timber floors back to bare wood using professional-grade sanding machinery Precision edge sanding and detailed finishing at corners, skirting boards, and transitions Surface preparation including: • Filling minor gaps where required • Smoothing sanding marks and imperfections • Levelling surface to ensure an even base prior to coating 2. Application of Premium Clear Coatings Apply 2–3 coats of high-quality, non-toxic, water-based clear varnish Light sanding between coats (if required) to achieve a smooth, uniform finish Materials can be supplied by me, or you may provide a quote inclusive of all materials and labour 3. Final Protective Seal Apply a final non-toxic protective sealer for enhanced durability and scratch resistance Ensure a consistent, even, high-quality finish across the entire floor area Maintain and highlight the natural timber grain and tone 4. Spiral Staircase Refinishing (14 Timber Steps) Careful machine or hand sanding of each step, including treads and risers Precision detail finishing on edges, corners, and curved spiral sections Application of matching varnish/stain and final protective sealer Consistent finish to match the main flooring area Extra attention to drip prevention, smooth transitions, and edge accuracy Additional Requirements: Use of dust-minimizing sanding equipment preferred Clean and tidy workspace during and after completion Professional workmanship with consistent coating results Clear communication throughout the process Option for on-site inspection before finalizing the price

Sand old polish off and refinish floor boards in one medium sized room, one small room, small corridor and small foyer

Hey there, my name is Jeremy . I need to hire a handyperson to help me in Noble Park VIC, Australia. What do you need done? Floorboard sanding and polishing in Noble Park What is the type of property? House Which areas of the property need work? Roughly >100m2 What would you like the handyperson to work on? Hiring a machine to sandback flooring and polish either entire floor with spot treatment. Thanks in advance! - Due date: Flexible

I have a vintage bamboo small stools and table i need sanded, stained and varnished - Due date: Flexible