Find a fence installation professional near you

The old gate was removed to allow access to the backyard, and I now need to reinstall a gate. The gate can be either Colorbond or timber. The passage is approximately 2.0 m wide, and the original gate was about 1.1 m wide. The original gate posts were hardwood, approximately 100 × 70 mm. After removing the original posts, there are existing two holes approximately 100 × 75–80 mm and about 600 mm deep, and a hardwood post attached to the wall. The walls of the holes are very smooth, which suggests the holes were created during the construction of the concrete slab. and the posts were inserted into the holes. Can we have a 65x65 steel post insert the existing hole and filled the gap with proper grout? Install a suitable bracket at the top of the post and secure it to the existing concrete slab to provide additional support and prevent the post from moving.

I'm looking for a licensed fencing contractor to supply and install a new Colorbond fence, including removal of the existing fence and a concrete mowing strip. Approx. 18 linear metres. Scope of work: Remove and dispose of existing steel/wire fence (18m) — includes 2 tree stumps currently entangled in the fence line that will also need removing. Supply and install new 1.5m high Colorbond fence (18m) — Woodland Grey. Lay a concrete mowing strip approx. 150mm (6") wide under the full length of the new fence line, including excavation, formwork and reinforcement. Details: Location: Ipswich, QLD Must hold a current QBCC licence and public liability insurance Flexible on start date — please note your earliest availability On-site assessment welcome before quoting, especially for the stump removal and ground conditions Please include in your quote: Total price, itemised by task (fence removal, stump removal, new fence supply & install, mowing strip) Estimated timeframe to complete Whether you do the concrete work yourselves or sub it out Your QBCC licence number Happy to answer questions — please message or call to arrange a time to view the site.

Replace current latch on metal fence. Need metal drill bits.

I need both of my back gate hinges replaced, ideally with corrosion-resistant hinges (galvanised or steel). The gate is a timber gate on a timber-and-flat-steel frame. Possible minor timber repair if rot is spotted - open to discussions.

looking to have this damaged outdoor metal gate replaced rather than repaired. I’d like someone experienced with metal gates/fencing to measure the opening, remove the existing damaged gate, supply or recommend a suitable replacement, and install it securely. Ideally I’d like the new gate to suit the existing railing/fence as closely as practical. Please let me know whether your offer is for labour only or includes the new gate/materials, and whether you can measure and source the replacement as part of the job. Photos attached.

PVC fence needs to be installed... Total 4 panels 2.4m in length All materials and fence kit will be provided You need to make sure you're not disturbing service lines while digging for posts You need toi bring all necessary toold I will give you a hand as labour

I have a small section of my retaining wall that needs fencing. One side of the fence has already been completed, and I just need the other side done. It’s a very small job, so I’m not sure what the exact cost would be and have just put in a rough price. Please feel free to make an offer, and if the price is reasonable, I’ll be happy to go ahead with the job. Thank you! Check the images please. The first image is where I want and the second one is the one which is already installed. I want same to that. The size is roughly 120x91 mm need to measure as this the size measured on already build one

Looking for someone experienced with timber paling fences to repair an existing boundary fence. The fence is generally usable but has several damaged/leaning sections and the gate needs repair/re-alignment. Looking to replace only the damaged palings/rails/posts where necessary rather than replacing the entire fence. Please assess what can be repaired vs what needs replacing and provide a quote. Ideally someone experienced with timber fencing and gate repairs.

Hi, I just need a baby gate installed - drilled into the wall. If possible, this afternoon between 3 and 4pm? We live in Nedlands.

Looking for some quotes to put in a new gate at the top of our external stairs onto our deck. Quotes to include materials cost. Was thinking timber but open to ideas of the best style of gate. The space in between the existing posts is approx 90cm wide, and would need to be about 1m tall. Currently we have an aluminium gate but was poorly installed by previous owner, doesn’t properly fit the space and has now broken. We have a toddler who’s desperate to get down the stairs so need this done asap. Thanks!

Need a section of fence to be replaced/repaired

Looking for someone experienced to supply and install a new timber side access gate between two houses in St Leonards. There is currently no gate in this location. Photos show the area where it needs to be installed. Requirements: - Approximately 1.8m high - Timber construction with a simple vertical slat design - Total gap is approximately 1.1m wide - One fixed panel to be attached to one house - Second panel to be a pedestrian gate/door, attached to the brick wall of the other house - Good quality hinges, latch and hardware - All materials and labour included - No painting required Happy for you to inspect and take final measurements before confirming the price and recommend the best construction/fixing method. Please include photos of similar gates you've installed.

The post re-attached to the driveway concrete, and one of the gates attached to the brick fence, Thanks

I need someone to install two of these gates, please, please bring own tools.

Replace metal gate with new metal gate. Have new gate and fittings already.

Looking for someone experienced with timber fence repairs to replace two decayed top rails. Scope of work Remove and dispose of 2 existing decayed rails Remove any loose/old nails Supply and install 2 × 90 × 35 mm timber rails, approximately 2.5 m long each Reattach/nail the existing fence palings securely to the new rails Leave the area neat and tidy after completion No fence posts or palings need replacing — they are in good condition. Only the two rails require replacement. Please bring all necessary tools, fixings and materials. Location: Augustine Heights

We are looking at quotes for the installation of a glass pool fence. Open to negotiation. Happy to purchase all the necessary materials upon advice At this stage just looking at if this can be done and for what cost making sure it meets regulations

I need to install 2 rows (of about 10 meters) of trellis wire for a climbing plant on my color-bond fence.