Find a fence installation professional in Geelong

I am looking for someone to build and install an electric front gate at my property in grovedale. The footing is already installed from the track and i have purchased the gate kit (excluding the gate frame). The gate size is approx 4.2m wide and 2m high. I can sort out the power supply to the motor. Flexible on timing for this to be built and installed

- 3 Cameras drilled into brickwork - 1m gate and 1m fencing 1900 tall to side of property with latch, I don't have any of those supplies - Smart door lock installed, I have the lock - Apx 6m of back fencing put up, I have the panels of wood fencing which are put together already that were removed from another area. They'll need to be put up and secured to ground and sides. Jobs need to be completed on the 22nd July between the hours of 10am and 3pm.

Capped timber fence with sleeper in bottom. Length: 13.2 m One side fence between the two houses and other side vacant land. Height of the fence to be 1.9 m

Hello, looking to get a quote for installation of a Black Chain Mesh fence (tennis court) in Wallington (3222). The dimensions are 8m wide x 17.4m long with a small gap/gate so people can enter. I would like top and bottom rails. The dimensions are 8m wide x 17.4m long with a small gap so people can enter. Images show the access and slab. Looking to do ASAP.

To add two sides to the perimeter fence, lattice like fence, with simple gate- I can purchase gate if needed See photo. Measurements are approx 3800 x 2700mm. Open to what the height should be, not a jumper and would be supervised. Do not have my own materials.

Require 33m of chain mesh fencing installed. Open to offers.

35LM Timber Fencing 75x50mm Treated Pine Rails 150x12 & 100x12mm Pailings overlapped 90x45mm Capping installed 2x1600mm Gates to be installed 2x900mm Pedestrian gate Galvanised frames with strongbacks for all gates 100x100mm Steel posts for Gate Opening Heavy Duty hinges installed with lockable latch and drop bolt

One panel from fence was taken off during build so we need to put it back plus we need to install matching side gate which is colorbond gate.

Replace an existing old fence as shown in the photo. About 12 meters long . Desired height 1.8m

I need someone to do my fencing for a new build. Timber fence. Measurements approx 1.8m-1.95 H fence constructed of timber palings with timber capping and exposed posts ( 75x125mm) 12.5 m rear fence, 15.4m side fence , close off side fence with a 1.27m gate (set back between house and side boundary = 1.27m)

i need to build pool for about 20*18

Fence palings are in good condition but the main posts x 3 need removing and replacing as current ones are rotted at the base and cauing fence to lean. I also need advice on extending some posts around the pool area.

Colorbond side gate with key lock Measurements; Width 1350mm

Fence to be built for our property. ETA hand over date of house is 31st of May, however have access at all times and can start anytime.

Looking for someone to install steel fence for front and back of staircase of house and balcony.

Side fence has collapsed in a couple of places. At least 10 metres needs to be repaired with some railing/ new posts also needed

Timber gate constructed and installed Size 1590H X 810W

Medium height iron gates for the front fence

Seeking a professional to supply and install an aluminium side gate with opening measuring 1150mm wide and 1800mm height.

I need my side fence replaced. It’s a standard pine fence approximately 12 metres long and 1.95m high.