Find a fence installation professional in Sydney Northern Beaches

Replace approximately 12.2m of back fence with a new timber fence. Existing fence to be removed and taken away. New posts required. New simple timber fence, stepping from 2.2m high at one end to 1.6m at the other to align with the side fences. Timing: within a month. Also build a simple low garden bed in front of the full fence, 70cm wide.

Install Bunnings pool fence / posts / gate. Will need to dig post holes. Wall to wall - straight fence approx 8.5m in total (including gate)

-Qualified carpenter only- Looking to get two gates made (or purchased) and installed Simple z gate is fine. Photo 1 - first gate 1040 to metal pole 1100 to the wood Photo 2 - second gate- 880mm wide

Pool gate is not self closing. I have a video. Pool inspection in october

I need a fencer to help me replace a piece of 1.8 meter long timber fence.

Looking for an experienced pool fencing installer to supply and install a new pool fence at our home. The job will include: Measure and assess the pool area Supply all fencing, posts, gates and required hardware Remove existing fencing if required Install the new pool fence and self-closing/self-latching gate Ensure installation complies with NSW pool fencing and safety requirements Leave the area clean and tidy on completion We’re looking for a clean, modern finish suitable for a coastal-style home: white aluminium fence. Please include in your offer: Your experience with pool fencing Photos of previous installations Proposed fencing type/material Whether all materials and installation are included Availability and estimated installation timeframe Happy to arrange a site inspection before finalising the price.

I am looking for a fencing contractor to install a new 8m long x 1.8m high fence with a 400mm bottom plinth. I am considering either: • Colorbond fence, or • Treated pine paling fence For the treated pine option, the requirements are: • Galvanised steel posts, securely concreted into the ground • H3 treated pine palings and rails • H4 treated pine bottom plinth

Need to replace 37 m of fencing with lap and cap

Replace old gate with new bunnings gate and put new latches/hinges onto gate. Also gate will need to be cut down to fit into the space existing gate was on. Thanks

I need to replace two pool fence posts. I have replacement posts which need to have fixtures applied before removing old posts. New posts require new holes to be drilled into cement before being bolted in place. I will assist with holding things in place whilst hole's are drilled with a heavy duty impact drill. There is also a lattice fence that will require minor repair. Required tools are ladder and heavy duty impact drill and bits. Assume 2 hours work.

Replace 2 rusted perimeter fence posts with supplied posts. Involves cutting through 4 dynabolts on each post. Location in a childcare centre, so the task should commence around midday during lunch and rest time.

40 m fence remove paling fence build colourbond fence

Installation of Coolaroo Decorative Fence Cover over existing Brushwood Fence. There are four 3-metre-long packs to install - the dimensions are 1.83m x 3.0m. I have UV-protected cable ties for fastening.

Replace old fence with new aluminum blade. Low height. 6m of fence on wooded deck down side of the house Will need help to ensure we have the necessary parts for the fence. I am looking for this to be installed https://www.bunnings.com.au/rapidfence-2200-x-900-x-90mm-black-blade-fence-panel_p0509427

I’m looking for an experienced handyman or carpenter to build and install two simple outdoor timber items. Job 1 – Replace side gate * Remove existing broken gate. * Build and install a new timber gate approximately 950mm wide x 1800mm high. * gate to fit existing gate frame (only the gate itself needs replacing). * Gate should include suitable hinges and latch. Job 2 – Build battery screen * Build and install a matching/similar timber privacy screen in front of our home battery. * Approximate size 700mm wide x 1800mm high. * Style to match the new gate (vertical timber slats preferred). * provide any latching v Painting * We will supply the exterior paint. * paint both the gate and battery screen after installation Materials * Please supply all timber, hardware, hinges, latch and fixings. * We will supply paint only. I’ve attached photos of the existing gate and battery location. Also the last photo is a different existing gate, looking for 2 x above to be similar in style and I’m happy to answer any questions before quoting.

I need a professional to replace paling fence and install a new 23m timber boundary fence in North Narrabeen The Job: Installation: Supply and install a 23m long timber fence. Height: 1.50 mt palings to maintain a level top. Posts: Galvanized steel posts with treated pine paling and stringers with Galvanized steel posts cemented

We need a carpenter or handyman to make a gate to cover the entrance to our pool pump. I’ve attached two images, one of the space I need blocked off and the other with some examples of mock up’s done ChatGPT. We are based in Palm Beach, and flexible with timing.

Re install pre fabricated metal side fence panels (horizontally mounted) - approx. 3m wide. side post has moved during earthwork so panels no longer fit (about 1 inch apart?) Need to move/adjust post so metal panels can slide in and be reattached.

Build White Picket Fence We’re looking for an experienced carpenter or fencing contractor to build and install a new white picket fence at our home in Allambie Heights. Scope of work: * Supply all labour, fixings and installation. * Build and install approximately 39 metres of 1m high white picket fencing. * Install 2 gates: * 1 × 1.9m wide pedestrian gate. * 1 × 1.3m wide pedestrian gate. * Install all posts and concrete footings as required. * Follow the attached fence layout. * Fence includes two small angled sections. * Install a mailbox (mailbox supplied by us). * Ensure gates are level, latch correctly and open/close smoothly. * We will remove and dispose of any installation waste. * Please provide examples/photos of previous fencing work. Need someone to install and supply materials which I can pay for or order and pay invoices directly. Unsure how much this will cost so I’ve set the budget to 2k but I expect it to be more anyways.

Replace wooden fence posts - about 20. I have fence posts but they need cutting down.