Find a local brick fencing contractor near you

We have a job in wheelers Hill Excavation and footings have been sorted. The plans show a little different, the write up below is most updated. 7 piers 470 x 470 Double bricked 1000mm high from ground level 1 pier with mailbox insert 4 dwarf walls Approx 1400mm long 800mm high from ground level Double bricked Exisiting retainer wall Add 2 courses of bricks Total approx 90 bricks Bricks all on site (600 of these need to be cleaned) Concrete on site Sand on site Builder will confirm about any steel required in brickwork (we have plenty onsite) My guys will render the brickwork and install cappings. Wanting the job done asap

remove some bricks from partial collapsed brick fence, rebuilt long lasting fence maybe with cinder blocks foundation then put up colorbond fence

remove a brass name plaque 245mm x 408mm that is glued to a brick fence. Once removed the area will need to be cleaned

Need a front property brick fence to be fully removed and rebuilt using the original bricks. The fence was damaged by tree root and part of the bricks are already removed I would like to get pricing for two options 1- full height as original 2- height 100-120 cm from the street level and including a gate Both includes building an internal garden bed attached to the fence Photos of the original fence and its extended is attached.

Looking for an experienced bricklayer / concreter to demolish and rebuild 2 x structural brick fence piers to a specified brief. Scope of works: Knock down and remove 2 existing brick piers Excavate and construct 2 new reinforced concrete footings. Rebuild brick piers and core-fill as specified Pier dimensions (each): 1500 mm high 360 × 360 mm Footings (each): 800 mm deep Pad size to suit pier (approx. 600–700 square) Concrete: N20–N25 Reinforcement: Reinforced footing cage, N12 deformed bar, 4 vertical bars, N12 closed ties @ ~200 mm centres, Minimum 50 mm concrete cover Steel posts: 1 × 100 × 100 × 4 mm galvanised SHS per pier. Post embedded 600–700 mm into footing. Post tied into reinforcement cage. Posts must be plumb and set before concrete pour. Pier construction: Brick piers built around steel post. Core backfilled with N20–N25 concrete. Brickwork tied to steel post. Piers to be square, plumb and ready for future gate automation Important: Structural steel carries gate loads — brickwork is non-structural. One monolithic concrete pour per footing. No dynabolting or post-install chemical anchors Access: Good Start: ASAP

FINISH TOP COAT RENDERING OF A BRICK FENCE

Install letter box into brick fence. The numbers will also need to be installed on to the face of the brick fence

Gaps fixed up on brick walls Mebe silicones ip

Repair brick wall , approx 20 bricks

Brick fence quote, 5 piers.

Looking for a bricklayer/landscaper to build a front brick fence, similar (not exactly the same) to the AI-generated design. I’ve attached a photo of my house for reference. Scope includes: * Brick fence at the front * Brick garden beds aligned with each step * Brick mailbox/parcel box Steel fencing is not required. I can supply materials if needed, but happy to get quotes both with and without materials. Also need soil filling once the fence is completed.

Our home brick wall fence is falling and needs to be fixed. A photo is attached .

Need someone to remove the render on this low brick fence, looking to refrain from any damage to the bricks underneath. Fence is 6m long and 400mm wide at pillars.

(I have added a before and after photo as an example) We are looking for an experienced and reliable tradesperson (or team) to construct a front boundary fence so that I can then install a sliding electric gate. Scope of works: * Demolish/remove existing front fence (timber/metal) and clean up site * Construct new 1.8m high brick fence on both sides of driveway * Build brick pillars suitable for a sliding electric gate (must be reinforced) * Leave correct opening for driveway access (to be confirmed onsite)

As per previous job - new listing up

Brick fence to 1.8m high approximately 6m long. Base brick fence is already in place with posts, just needs bricking up in between posts - 4 sections to fill. Have bricks on site already. Will be rendered afterwards

Looking to get a brick fence taken down as there is a lean and it needs to be made safe. Can organise skip and removal of the bricks just need the wall to come down. Main wall is Main wall is about 9.4 meters and post is 0.73 meters. Height is 1.86 meters Metal gate can be removed prior. Please provide me with your prices as I haven't sourced quotes yet.

Remove the brick fence, we will arrange the skip. Looking for demolition experts.

I have 4 L self priming white paint and a roller suitable for brick as well as some paint brushes. Just need someone to brush the surface clean and then paint. Front wall is 10.5mx1.85m, side wall 9mx1.85m and photo is of a third wall just needing some spots touched up.

Can someone please repair this brick fence for my grandmother. She is a pensioner and looking for a reasonable price to repair this.