Find trusted local electricians in Murrumbeena

Hi Team, I am requesting a formal quote and proposal for the supply and installation of a reverse-cycle split system air conditioner. Please note that the property is currently vacant and listed for rent. This installation is required to meet Victorian Rental Minimum Standards. Therefore, the quote must be comprehensive and explicitly confirm the following requirements in accordance with my Owners Corporation guidelines:Installer Qualifications: Confirmation that work will be carried out by a Registered Electrical Contractor and that a Certificate of Electrical Safety will be provided upon completion.Condenser Placement: The outdoor unit must be positioned at least 500mm clear of any hot water services.Drainage/Sullage: The condensate hose must be plumbed directly into a sullage pit. It is strictly prohibited for the unit to drip onto concrete or bare ground.Quote Breakdown: Please provide an itemized breakdown including:Unit supply (including energy-efficiency rating).Installation costs.Electrical work (including any necessary circuit/switchboard upgrades).Line/pipe casing capping requirements.Please let me know if you require an onsite inspection to provide an accurate quote, or if you can work from the online listing and floor plan. I am looking to progress this as soon as possible to finalize compliance for the property.

Looking for someone to build a box cover for my electrical meter, photo attached. The box need to be able to open so you can access the meter. I’m Okay if the box goes the the ceiling panel (photo) which would make it roughly 60x45cms or just cover the 50x45cm surround of the meter.

Hello I have a few jobs to be carried out 1. Installing lights in our verandah 2. Installing a fan in our verandah 3. Removing and installing wall lights 4. Fixing the existing garden lights which are not working I am not sure the cost of material and labor for this job. Happy to discuss post site visit. Photo os verandah where we need to install some lights, Photo of pillar lights to be replaced Photo of ground light not working

My downlight is flashing. The diver should be replaced.

I currently have 5 pendent lights in my house and need them replaced with new pendant lights I have purchased

Install 7kw ev charger that I have to single phase house. Cable length 10 metres approx to switch. Single storey tiled roof

x2 straight forward wall GPO installations. x1 to be installed inside a fireplace recess. Wiring is there but needs to be moved further back inside the recess. Photo. Please provide the GPOs.

Install ev foxess charger

I’m looking for a licensed electrician to replace 4 existing ceiling light fittings in my house. Scope of work: Remove 4 existing ceiling light fittings Install 4 new batten-fix light fittings (supplied by me) Existing wiring and ceiling connection points are already in place Ensure all fittings are installed safely and tested upon completion Must be a licensed electrician Please provide your license details and any relevant experience Thank you!

I bought an old floor lamp that needs a replacement/rewiring, including a new lampholder, switch etc

I need a licensed electrician to inspect and repair two faulty power points in my Airbnb unit. One double power point stopped working after the kettle caused it to smoke, and only one socket still works. Another double power point nearby also has one socket that’s not functioning. I need someone to diagnose and fix both power points. Preferably this week.

I need someone to change standard bedroom ceiling light to a pendant fitting (I believe that’s what it’s called???!!) and install hanging lights in Murrumbeena in ground floor unit in 2 storey building-I think the roof cement not plaster.

Replace 4 MR16 downlight globes plus one (standard globe in kitchen) (easy job) Description: Looking for someone to replace 4 existing MR16 halogen globes with LED MR16 globe and one standard globe in kitchen. Ceiling is slightly higher than standard. Globes provided

I need to have a double power point (no switches needed) installed on the floor by a licensed electrician. (First pic) There is one power outlet (mounted on the wall) about 3.5m away. There is a subfloor. Will need to have everything (floor and wall) fixed and patched upon completion, so everything looks seamless. Also snother task is checking the plug (second picture) and see if it is working Thank you.

I have a newly built house and my garage already has existing power points. I just need three additional power points installed in the garage. This should be a simple job, as no rewiring or major work is required — just adding extra outlets from the existing power source. Please provide: • Your quote / offer • Whether materials are included • Estimated time required • Your earliest availability Photos can be provided if needed. Looking for certified electrician reliable with experience. Thank you!

Electrical Work Required Summary: We require a licensed electrician to address several items identified in a recent inspection to ensure compliance and the safety. Scope of Work • Upgrade the main switchboard so that all circuits are protected by RCD/RCBO. • Rectify all concerns with the switchboard, including: o Bare earth wiring (requires insulation with heat shrink) o Exposed terminals (must be insulated to prevent accidental contact) o Unsafe installation of a circuit breaker (currently loose and not mounted on a DIN rail) • Issue a Certificate of Electrical Safety upon completion. • Replace the existing single GPO (power point) above the fridge with a double GPO. • Repair a faulty GPO in the kitchen (not working, but not an immediate safety concern). Additional Details • All smoke alarms are compliant and do not require attention. • The property is a residential apartment, built before August 1997. • Work must comply with the Residential Tenancies Regulations 2021 and AS/NZS 3019 standards.

Smoke Alarm, Electrical & Gas compliance checks for rental property - https://www.realestate.com.au/property/unit-3-20-gerald-st-murrumbeena-vic-3163/

Replace LED downlight, slow to come on. Smoke alarm, fix or replace.

I will purchase a Ventair Airbus EC200 (with LED light) exhaust fan that needs to be installed in place of an existing light fixture mounted on a concrete ceiling (~2.2m high) in my ground floor apartment. The fan must be securely mounted, and connected to the existing light switch wiring (unless you advise otherwise). Please note: • The vent outlet to the outside is not yet connected — I will handle this separately. • If you have experience building Gyprock enclosures, please mention this as I may consider enclosing the fan. • There is an apartment above. I have a concrete ceiling and there is no ceiling void as far as I can tell. • Reuse of existing wiring is expected. • Proof of electrician licensing and a certificate of electrical safety are required. • Flexible timing for job completion.

Install and wire new bathroom fan/light. New fan/light has been purchased and is replacing an old one.