Find trusted local electricians in Melbourne

My son’s e-bike handlebars twisted and this has pulled a wire/connection out from the throttle. The bike has stopped working since. We don’t want to try reconnecting it ourselves and potentially cause further damage. Looking for someone experienced with e-bikes/electrical repairs to come to our home in Essendon, inspect the throttle and wiring and repair/reconnect it if possible.

Disconnect PowerPoints and fuse box in kitchen so kitchen demo can be completed ready for new install. Additional work available to reinstall new fuse box and PowerPoints later once kitchen installed.

Install downlights in bedrooms to replace old lights as shown in picture. Installed on same, existing switch where possible. Looking at installing 4-8 lights. Licensed/certified professionals only.

Looking for a licensed electrician available TODAY to install a new STIRLING Glass Induction Cooktop 60cm in my apartment in Armadale, VIC. Cooktop is brand new and already at the property. It is replacing an existing cooktop. Product details: STIRLING Glass Induction Cooktop 60cm Dimensions: 590mm x 520mm x 60mm 4 heating zones Can be installed using the included 10A plug OR hardwired. Product link: https://www.aldi.com.au/product/000000000000745873 I would preferably like the cooktop hardwired if the existing electrical circuit/setup is suitable. Job to include: Removal/disconnection of existing cooktop Installation and connection of new cooktop Hardwiring if appropriate/suitable Testing to ensure everything is working correctly Electrical safety/compliance certificate as required Must be a licensed electrician and must be able to provide evidence of current public liability insurance. Looking for someone who can attend today in Armadale. Please include your availability today, licence details and whether your offer includes all labour and certification.

I’m looking for a licensed electrician to install one new double power point on a plasterboard wall in my apartment. There is an existing double power point approximately a few metres away near the marble shelf, which I’d like the new outlet to potentially be supplied from. The job: * Install 1 x standard double GPO underneath the existing picture frame (see photo). * Ideally run the cable inside the plasterboard wall cavity from the existing power point. * I want no visible cabling or plaster chasing between the two points. * Only the necessary cut-out for the new GPO. * Please assess whether the existing GPO/circuit is suitable for the additional outlet. * Supply and install the GPO. * Test and leave the installation compliant and tidy. * Licensed electrician only – Victorian electrical regulations apply. Budget: $250–$300 Seeking a fixed price agreed before starting. Please quote including labour, materials and installation and confirm you are a licensed electrician in Victoria. Photo attached showing the existing socket and proposed location

The bathroom light and fan are both turned on with one switch. I want them changed to be turned on by seperate switches I have the replacement switch already

Two things: - Close off dangling wire recesses and remove electrical fixtures off the wall (I can close it off with plaster etc, I just need exposed wires closed off). - replace 14 cigarette lights with recessed down lights

I need to get smoke alarm safety check certificate for a rental property.

Electrician Needed – Monday Morning Looking for an electrician available Monday morning to connect/install the following: - Electric hot water unit - Dishwasher - Cooktop - Oven - Rangehood All appliances/units are already on site and ready for connection

Licensed Electrician Required: Workshop Rough-In and Final Fit-Off Looking for a qualified and licensed electrician with solid rough-in and fit-off experience for a small new workshop. IMPORTANT: The workshop has open framing with no plaster installed, so wall and ceiling access is clear. The job will be completed in two stages. Stage 1: Rough-In Rough-in wiring for 1 hardwired interconnected photoelectric smoke alarm Rough-in wiring and positions for 6 dimmable LED downlights Rough-in wiring and mounting positions for 5 quad GPO power outlets Install 2 Cat6 data runs from the main house to nominated workshop locations Rough-in wiring for LED bias lighting and smart wall dimmer/control Install and prepare all switch, dimmer and control positions Supply all electrical cabling, Cat6 cabling, connectors and standard consumables Secure all wiring and leave the workshop ready for plastering Stage 2: Final Fit-Off Return after plastering to: Install and connect smoke alarm, 6 supplied downlights and 5 quad GPOs Install switches, dimmers and smart lighting controls Terminate and test both Cat6 data runs Complete LED bias lighting setup Test all circuits, lighting, outlets and data points Provide required electrical safety and compliance documentation We supply: 6 LED downlight fixtures Electrician to supply: All cabling, Cat6 cable, smoke alarm, quad GPOs, switches, dimmers, data outlets, connectors and standard consumables Requirements: Qualified and licensed electrician Experienced in residential or workshop rough-in and fit-off Registered to complete and terminate data cabling Own tools and testing equipment Work completed to Australian electrical and cabling standards Available to return for final fit-off Please quote for both stages, including labour and electrician-supplied materials.

I need my Generator, Bain marie, and 3 extension leads tested and tagged before this Friday night

Looking for a licensed electrician to carry out an electrical safety inspection and issue a Certificate of Electrical Safety (COES) for two small, adjoining retail shops (25 m² each) in Melbourne CBD. Power has been disconnected during vacancy, and the distributor requires an official COES to turn it back on. Exactly What Needs to Be Done Switchboard Assessment: Inspect circuit breakers, RCD safety switches, earthing, and main switches for both units. Electrical Safety Testing: Perform mandatory testing (insulation resistance, polarity, earth loop impedance, and continuity). Visual Inspection: Quick visual check of power points, lighting, and accessible wiring across both 25 m² spaces. Main Switch Protocol: Ensure main switches remain safely turned OFF ready for distributor reconnection. What Is Required at the End Official ESV Lodgement: A Certificate of Electrical Safety lodged directly through ESVConnect (Energy Safe Victoria). PDF Copy: A digital copy sent immediately so it can be provided to the energy provider.

Looking to hire a licensed electrician for 3-4 hours work to replace some smoke alarms and old power points and troubleshoot a lighting problem and issue COES for works. Seeking price for call out fee and hourly rate. Alarms and power points will be supplied. Interconnection line will be pre run to pull through cable.

I’ve got a garage studio where the power occasionally trips when high-power appliances like the kettle, washing machine or heater are being used. I believe the garage and some of the downstairs power points may be running on the same circuit. Could you please assess whether the load can be redistributed across the existing circuits, or whether it would be better to install a new dedicated circuit? I’m just looking for the most cost-effective way to prevent the power from tripping.

We’re looking for a licensed electrician located near Port Melbourne for a small, straightforward job at Port Melbourne . The work involves: 1. Repairing or replacing the damaged/cut electrical cord on a large illuminated full-length mirror and ensuring the lighting operates correctly. 2. Reconnecting the loose lighting wires from a light-up sculpture to its existing LED transformer/driver. 3. Properly configuring and securing the transformer and fitting a suitable power lead and plug so the sculpture can be safely connected to a standard power outlet. 4. Testing both pieces to ensure they are safe and fully operational. The mirror, sculpture and existing transformer are onsite. Please bring any suitable replacement cable, connectors, plug and electrical fittings that may be required. Location: Port Melbourne, VIC 3207. This should be a relatively quick job for an experienced electrician. Ideally, we would like someone local who can attend as soon as possible. Ideally prefer 3pm today

Chasing a licenced electrician. We have installed some new counters in a shop in cbd. There is existing supply from old counters. We need to install the below. Wire up 10 power points, Install 2 x plug bases. Connect 1 extra feed into power point to liven up, cable in ready to go. All materials supplied. Upon completion we require a COES for the works you have done. Plenty of car parking ( free ) Ground floor with easy access. You can park within 15m of the site. I have allowed 4 hours labour.

I need a new on/off switch on my bed side lamp as it’s flickering. I also have a floor lamp that needs a new wire (arrived faulty)

I have a large skylight I would like to install on my roof. I am looking for experienced help to oversee and assist installation. I am handy and happy to do most of the heavy lifting etc but specifically looking for someone who is either in the industry or WELL versed in this kind of installation to help with the finiky side of things. I am specifically NOT looking for a second well to do handyman like myself. PLEASE ONLY MESSAGE IF THIS IS SOMETHING YOU ARE AN EXPERIENCED PRO AT. Additionally I have two other skylights which have been leaking and i would like some friendly professional advice on how to fix. To clarify I am only seeking help installing, watertight, onto roof. No need for shafting/plastering etc on the inside. Skylight is a standard Velux and I currently have the corresponding flashing. Roof is a pitched Terracotta Tile (1st Floor)

Looking for a licensed electrician to complete the electrical work required for a new heat-pump hot-water system being installed ( new double power point) Hot water system: Midea RSJ-23/300RDN7-L2 280L heat-pump hot-water system with electric element. Job details: • New Midea unit will replace the existing Aquamax gas hot-water system shown in the photos. • A suitable weatherproof outdoor Double power point/electrical connection is required for the new Midea unit. • There is already an external power point supplying the ducted heating approximately 2–3 metres away. • Good access underneath the house via the subfloor. • Photo of the existing switchboard is attached. • Electrician to determine whether an existing circuit can safely and compliantly be used/extended, or whether a new dedicated circuit/RCBO is required for this particular Midea unit. Please quote your best ALL-INCLUSIVE price for everything electrically required to have the Midea ready for connection, including labour, weatherproof power point, cabling, circuit/RCBO if required, materials and electrical compliance/safety certificate. Please base your offer on the information and photos provided and advise in your offer exactly what is included. Must be completed by a licensed electrician and fully compliant. Thankyou 😊👍

A suspended pendant light in the bathroom has been accidentally pulled loose from its mounting. The light fitting appears intact and is still hanging in place. We’re looking for a licensed electrician to inspect the mounting and wiring, securely reattach the fitting, and test it to make sure everything is safe and working properly. Located in Fitzroy VIC. Available all day Mondays, with some after-hours availability on other days by arrangement.