Find trusted local electricians in St Kilda East

Need assistance in putting bathroom fan in/installing. Might be plugged or wired(unable to see), install ring camera at front of property (wired) and unsure if this sensor light broken but can use this if required (may need another light switch). Single story*

For repairing gas oven. Urgently

Install 4 x pendant lights and 1 track lighting.

The nbn already runs into the apartment building, but the last leg is not working. I need someone to repair or replace the cabling I think. I'll put a $250 budget, but I want to hear what you would charge.

Need a dual power point installed in a garage (brick wall)

After a licensed electrician to remove a plug socket from half way up a wall entirely. Will be getting it patched over and painted. The problem is - the NBN cable is coming out this socket. So that will need rewiring and redirecting elsewhere in the house. The walls are double brick but I have access to the roof - so have options. Licensed Electrician only. After hours during the week or during the way on weekend.

Qualified Electricians only (certified of compliance needed). Need to install 3 floating shelves on 1 wall, and 1 floating shelf on another wall. All shelves will have LED lighting (shelf brackets (recessed), LED strip and LED channel (recessed) have been arranged already, so task is to have these LED lights wired behind plasterboard wall and installed to (next to) existing circuits in both install areas

Looking for a licensed electrician to complete the final fit-off for a newly renovated bathroom and laundry. Our previous electrician is unavailable due to personal reasons. Most rough-in and cabling are already completed — this is primarily a fit off job with only incomplete minor cabling required in the toilet ceiling to be run externally. Job Scope: - Replace switch for main ceiling light (rough-in of cabling complete) - Supply and install LED strip light to suit provided extrusion and compatible transformer (extrusion channel supplied & installed rough-in of cabling complete) - Install GPO + switch for LED light – LHS cabinet (rough-in of cabling complete and backing plates) - Install double GPO with switch for plug-in fan – RHS cabinet (rough-in and cabling complete, run GPO cable externally) - Fit off GPO for washing machine (cable to be run externally, rough-in and cabling complete) - Fit off GPO on wall (rough-in and cabling complete) - Add GPO for plug-in fan in toilet (may require externally run cable in conduit along ceiling) - Connection for toilet light/fan switch (existing wiring in place and to be combined) Details: No wall chasing required Work to be completed when bathroom renovation is completed (not including paint/ patching) Minor cabling as outlined above. Location:St Kilda East

Electrical works associated with removing an oven. Lots more work to do on this Reno but this is the first stage. Please also quote hourly rates

4 new switchboards to be installed by licensed electrician

My smoke alarm has started beeping and I cannot reach it to take out the battery. I have a company coming in a few weeks to service and replace all batteries, but I will need just the one battery taken out for now. No need to replace

I need 2x new double GPO’s in my bedroom

See images for mark up and more details, Walls at rendered brick.

I have a fuse box in my apartment with a CBUS and i want it moved about 30cm away - all inside the same cavity/stud wall.

I’m trying to install wardrobes and the power point is in the way. I’m wanting it removed as soon as possible please (desperate for wardrobes!). Ideally just to make it safe and allow my wardrobe to sit flush, then one day in the future we can relocate it. Brick walls. The wardrobe in the picture can be moved out of your way to do the job. Must provide proof of electrician license before I assign the job 🙏🏻 Many thanks

Move 2 powerpoints from skirting board to wall above. Will need to be extended and surface mounted most likely. Install isolation switch for new induction cooktop, will probably also need to be surface mounted. Oven is not needed, so 20A circuit + cable from oven would be used as new dedicated circuit for the 4.7kW cooktop. Plenty of slack on it. New cooktop is ready to be wired in and go. Needs to be done by qualified electrician with COES issued for work.

Electrical wall heater disconnected, smoke alarm hard wired installed and a quote for install of split aircon

Smoke alarm hardwired install and an electric wall heater to be disconnected and removed off wall. Also quote for split system aircon install

Need the following works executed: 2 light switches replaced (I already have the replacement switches) 1 plug installed for LED strip lighting (easy installation as exposed studs Cap 2 lose wires

I need a qualified Electrician to install a split system air conditioning system onto the roof of an apartment complex (accessible by man hole) and unit place on internal wall