Find trusted local electricians in NSW

I need an electrician to install: - Two ceiling drop lights removed and switched out with restored antique light fixtures. - - - Ceilings are 3-to-3.5m high. We don't have a ladder. I believe we have all the needed screws etc, but the job will require tools. Fixtures seem to be mounted well and it should be straightforward. - A damaged light switch (4 power points) repaired. Removalists dropped a bed on it and it's partly ripped out of the wall. The hole is old and there's brickwork missing. The power points are still working and it slots back in so it may just need to be reaffixed to the wall properly. Some damage to the plaster around it that also will need repair.

Looking for a licenced & insured Electrician to install 3x isolator switches for new AC split systems. 2x 7kW (back to back), 1x 3.5kW (back to back). House is a single storey, 1970s build double brick house with cavity, high pitched roof. No conduit work required. Electrical board has capacity. Owner can supply isolators and cable.

Supply and Install led spotlight with sensor, vanity light ( replacing existing )

Please quote: Licensed electrician to: 1. Replace two existing ceiling lights with two new lights we bought 2. Disconnect / remove two lights and wiring (no longer needed) 3. Fix two switches. One light switch is loose and sparks. One power switch is loose.

Need to remove solar panel and reinstalling back after roofing is done

Dig a trench for approx 13-14 m for NBN conduit and run LIC (Lead in Cable)

I need two powerpoints and one switch replaced.

Have a switch in the main electrical panel that periodically flicks off/trips. Want to make sure all the switches are safe and understand why, it flicks off and a few of the appliances switch off. Mainly for safety reasons, but also to see why its happening.

AusGrid just replaced a power box that we draw electricity from. They said that before we use our aircon we need an electrician to come and “phase rotation is to be confirmed before energising”. We have a pretty new fuse box- we had it replaced with a new one about a year ago when we moved in here, so I imagine it should be straightforward enough. The AC unit says “daikin code ertor u1”, so we need that fixed.

We have had 5 x new power points (doubles) installed by our insurer's electrician, and we would like to get them all changed from doubles to quadruples, i.e. 2 outlet GPOs to 4 outlet GPOs. As this is a factory we need commercial-grade hardware only, so please specify what you would propose to use. All points are along a single wall as-per photo. We are not super fussy about timing but would prefer Thursday if possible. Licensed electricians only please.

I need a licensed electrician to install security cameras at my property in Darlinghurst. Rear (Primary Job – Hardwired): Install 1 x Ring Floodlight Cam Wired Pro (2nd Gen) above rear garage roller door (access via Hickey Lane). • Garage is sheltered. • Existing garage light and power available in ceiling space. • Mount camera approx. 2.8–3.0m high on brick wall. • Install appropriate IP-rated junction box. • Hardwire into existing lighting circuit. • Ensure compliant installation and weather sealing. No switch bypass required — can remain on existing lighting circuit. ⸻ Front (Secondary Job – Mount Only): Install 1 x Ring Spotlight Cam Pro (Plug-in). • Drill into brick façade. • Secure mount at approx. 2.5m height. • Neatly route and secure cable. • Seal any penetrations. • Existing power outlet available. ⸻ Additional Notes: • Please confirm you are a licensed electrician. • Please quote including all materials (junction box, fixings, sealant, etc.). • Ladder access required (approx. 3m height at rear). • Looking for clean, professional finish.

I required electrician services for power point there junction box on the ceiling and needs around 1 meter wiring and install new power point. I can provide the power point. Expect electrician shroud have 1 meter 3 core wire and covering if any.

I am seeking a licensed technician to diagnose and repair a large-capacity air conditioning system currently servicing a 10-room boarding house. The unit has completely stopped functioning and requires a professional assessment to identify the root cause—whether it be a compressor failure, electrical fault, or refrigerant issue—and a subsequent fix to restore cooling to all residents.

Hi i need a Sparky, to disconnect lighting make safe. I will take lights and brackets down. 13 in total total some just unplug Parking out front of building on botany road. Preferably tomorrow sometime. Can do after hours, or Tuesday morning. I have more work coming up so would be good to find someone i can trust. Can do hourly rate or fixed price. Easy access. The business is moving premises. I will assist you on the day be your lacky if needed.

Replace 3 fans, move 1 fan, move one switch 10cm and add 2 power sockets

Please note that this is a double storey house. The power outlets have already been purchased from Bunnings and are available on site. This is a new installation, so there are no existing outlets in those locations to replace. The roof space is accessible. I would like the work to be completed by Wednesday this week

We require a licensed electrician tomorrow (Sunday) to isolate and disconnect electrical services prior to demolition on Monday morning. This is a residential outbuilding with a separate sub-board and good access. Scope of works: • Isolate and disconnect sub-board supplying structure • Safely disconnect hardwired spa (dedicated circuit) • Remove spa isolator if required • Remove all downlights intact for reuse • Remove wall lights intact for reuse • Remove all GPOs (power outlets) intact for reuse • Safely terminate and make compliant all remaining wiring • Ensure main house power remains unaffected ⚠️ Important: All light fittings and GPOs are to be removed carefully and kept intact for reuse. Please do not cut cables short or damage fittings. All works must be compliant and safe for demolition. Location: [Your suburb] Access available Sunday during business hours. Demolition commences Monday morning. Please confirm: • Electrical licence number • Availability time • Fixed price quote All light fittings and GPOs are to be removed intact for reuse. Cables will need to be left long for retro fitting elsewhere.

We had to disconnect power points in order to install the kitchen. Now, need an Electrician to reconnect them and also connect the HWS. Preferably today. Task price is just to get estimates.

Require LED mirror and power point installed inside vanity unit. Also, replace LED unit in Dining Room. All accessories provided.

Need a licensed electrician to replace: - 3 pargola lights with batten lights - 4 up-down wall lights with new ones Wiring is existing and lights will be supplied.