Find experienced local carpenters in Sydney Northern Beaches

Router work needed — dado grooves on 36 pre-cut plywood panels We're building custom cabinetry and need one simple groove cut on each of 36 drawer box side panels. All panels are already cut to size. We bring them to you. The cut: • 6mm wide × 6mm deep groove • 10mm from the bottom edge • Running the full 500mm width of each panel • Inside face only • All panels are 12mm birch plywood, 500mm wide • Heights vary: 200mm (8), 212mm (16), 277mm (2), 401mm (8), 429mm (2) •36 panels total = 18 linear metres of routing A router table with a 6mm straight bit and fence set at 10mm would make quick work of this — probably 30-45 minutes. We supply all panels, you supply the router. We pick up when done. Location: Northern Beaches / North Shore preferred Timeline: as soon as possible

Need some timber framing to be completed which will sit in front of my fence posts will be made up of H3. Will need to go into current garden bed against the back fence

Cut to size and install kitchen benchtop Including sink and electric stove top cut out Timber laminate benchtop from bunnings

A few days work for one man to build some decorative structure in a home cinema. I’ll need you to allocate 3 days. Inside work, good access, your tools, me to pay for materials. In basic terms you’ll be fixing a timber framed wall to a concrete floor and associated work. Nothing complicated. You need to be a carpenter.

I'm looking for an experienced carpenter or handyman to repair a damaged section of the soffit/eave underneath the roof overhang at the front of my house. As shown in the attached photo, part of the soffit lining has come away, leaving an opening and exposing the structure underneath. The job will likely involve: - Inspecting the extent of the damage - Removing any loose or damaged material - Supplying and installing replacement soffit/eave sheeting (or advising on suitable material) - Securing and finishing the repaired section to match the existing appearance as closely as possible - Checking for any signs of water ingress or additional damage in the affected area Please bring your own tools and advise if any additional materials are required. Location: Allambie Heights Preferred Timing: Flexible, but would like the repair completed as soon as practical. When responding, please include: - Relevant carpentry or repair experience - Whether you can supply materials - An estimate of labour and material costs and your availability Photo attached for reference.

Repair timber ceiling boards Reinstall side gate Replace bathroom door Repair cupboard shelves and hinges Fix timber ceiling finish Cover wall hole Repair furniture leg Fix front and granny flat doors Replace broken walkway board Repair door handles and locks

1. Install Push opens on kitchen island bottoms cupboards (around 8 push opens) 2. Pull down units inside cupboards were installed too high we need to drop them about 50mm there is 2 of them

I’m looking for someone to sand and stain a small deck and build & install a wooden privacy screen. (See AI generated photo of screen id like)

Timber staircase: Sand back, remove glue marks, fill in nail holes, prepare and apply 2 coats of suitable clear stain. 14 stairs in total Step treads, raisers and sides all need to be done.

Kitchen Window Timber Repair & Window Adjustment (expect quote to include labour and parts) Looking for an experienced handyman or carpenter to: * Inspect and repair timber rot to internal kitchen window sill/frame above sink. * Remove any soft or damaged timber and repair/rebuild affected sections. * Sand, prime and repaint repaired timber. * Remove old sealant and apply new waterproof silicone/sealant around window frame and benchtop junction. * Investigate and fix window that is currently stuck and difficult to open (possibly due to timber swelling, warping or paint build-up). * Adjust, plane or lubricate window as required so it opens and closes properly. * Check for any signs of water ingress and recommend any additional repairs if required. Photos attached. Please quote labour and materials separately and advise if any additional carpentry work may be required once rot is exposed.

Wainscoting and dado with mitre edges Dado 8m Wainscoting 1800x 600 x 6 (4 are not fully around just top and side Cinema room Requires experience carpentry with eye for detail Must have all equipment including laser 2 full wainscots and 4 3/4 as per drawing Install and dress edges with silicon

Screw in a piece of wood to be removed without breaking the wood please

Looking for a carpenter/ handyman to create a wooden drawer or similar Currently there is now a space where an old Dishwasher - Fisher and Paykal dishdrawer used to be. It has now been removed. :) we have the front cover still for the drawer - shown in the picture- with handle from the old dishwasher integrated unit. $250 Quote does not include materials. Please invoice materials separately. Thank you

Hi there! I’m looking for an experienced carpenter or skilled handyperson to install a couple of bathroom accessories in my unit in Dee Why. ​The Job: ​Install 1x hand towel ring ​Install 1x robe hook ​The Details: ​Surface: Both items need to be mounted directly onto bathroom wall tiles. You must have experience drilling into tile without cracking it and bring the appropriate drill bits. ​Materials Provided: I have the fixtures, mounting brackets, screws, and standard wall plugs ready to go. You just need to bring the tools and the expertise. ​Care Required: The fixtures have a matte black finish, so I need someone who will be extra careful not to scratch or scuff the hardware during the installation.

We would like to modify the doors of our laundry as the washing machine and dryer we have are bigger and stick out. We have 2 floor to Celina doors that we would need to cut to cover everything else and leave the washing machine and dryer uncovered.

I have a window frame on house that is water damaged and needs repair/replacement and the guttering/roofing above repaired to stop it happening again. Second story bedroom window. No water ingress, water damage is on outside. There is no guttering above but needs some kind of solution to stop overflow of water from roof at this point to stop the run onto the wall and window. Struggling to find a builder willing to do this job in isolation. Any solo carpenters/handymen out there that can handle a job like this? No idea of cost, if budget is not appropriate, please make an offer.

Our outdoor balustrade has had some rotting that has occurred in isolated areas - railing needs to be patched and glued / builders bog in a few spots. Painting not required.

If you can do Ikea installations this work will be easy... - Handy Person / Carpenter Needed -Tasks include - Assisting with screwing steel frames together with all work & assembly done in warehouse. Instruction sheets provided working collaboratively as part of a friendly team Power drills provided or BYO Be able to lift bulky items up to 20kg 9am to 4pm Total 7hrs with 30min lunch break on Friday tomorrow Belrose area Free on site parking available ****Own gloves are necessary for this work*** Long pants and closed shoes recommended

The timber balcony balustrade is wobbling so it needs timber batten braces fixed from the top of the balustrade post to the rafters beneath the timber deck. Refer attached images. Supply of materials by me. ie 92 x 18mm H3 timber batten braces, M10 bolt(s), buggles.

Hi there! I have an existing timber decking to a balcony that is located about 100mm above an existing concrete slab. Leaves are gathering in the gap below the timber decking and I would like an number of access hatches or similar places in the decking to clean out the leaves. Timber decking is existing and is to be reused. Hinges and handles are to be provided by you. You will see in the photos I have partially removed the decking. Access is via a long driveway that a large van can access. Then there is steps up about 3 floors. The job can be done in January. There are 2 seperate decking areas that are a similar size. The photos show one area.