Find experienced local carpenters in Frenchs Forest

I'm looking for an experienced carpenter to build a series of professional modular wall panels ("Hollywood Flats") for a production studio in Frenchs Forest. These are not permanent walls—they're lightweight, reusable scenic flats that can be reconfigured to create different filming environments. The initial scope is to build two modular studio sets, including the framing. Scope The carpenter will: Build professional-quality Hollywood flats Construct modular wall sections that bolt together Build freestanding support jacks/bracing where required Ensure all panels are square, lightweight and reusable Assist with assembly inside the warehouse Set A (Large Talk Show Set) Approximate size: 6.3m wide 5.4m deep To include: Main feature wall Side return walls Window opening/frame Modular construction for future reconfiguration Set B (Interview Set) Approximate size: 4m wide 3.6m deep To include: Feature wall Side walls Modular construction matching Set A Materials Carpenter with experience building sets, exhibition displays, theatre scenery or custom framing Strong attention to detail Able to work from drawings and concept renders Own tools preferred Experience building modular structures is highly regarded Important: The sets need to be built as a modular system rather than permanent structures. The wall panels should be reusable, easily assembled/disassembled, and interchangeable so the studio can be reconfigured into different filming environments over time. I'm open to your recommendations on the best construction method to achieve this. This is a long-term studio fit-out, not a one-off set build. I'm looking to establish an ongoing relationship with a skilled carpenter, as there will likely be additional work including set expansions, custom scenic elements, storage solutions and future studio modifications. The warehouse is located in Frenchs Forest, Sydney.

I'm looking for an experienced cabinet maker, joiner or finish carpenter to help build and install custom joinery for a new office fit-out in a warehouse in Frenchs Forest, Sydney. The design has already been developed. I'm looking for someone who can manufacture and install the joinery directly, rather than engaging a large commercial fit-out company. The project includes: Built-in walnut workstation desk approximately 4.5–5m long Four integrated workstations Overhead shelving and storage Ideally you: Have experience with custom office or commercial joinery Can read architectural drawings and renders Can source materials at trade pricing Have examples/photos of previous work Can quote manufacture and installation separately if required The warehouse is located in Frenchs Forest, NSW. I'm happy to work with an independent cabinet maker or small team. I'm looking for someone who takes pride in high-quality workmanship while helping achieve a premium result within a sensible budget. Please send: Photos of similar projects Your approximate availability Your hourly/day rate or preferred quoting method Whether you manufacture in-house or outsource Please note: This is a leased office (initial 2-year term), so while quality and aesthetics are important, I'm looking for smart, cost-effective joinery solutions that maximise value. I'm open to alternative materials or construction methods that achieve a premium finish without overcapitalising on the space.

Need some timber framing to be completed which will sit in front of my fence posts will be made up of H3. Will need to go into current garden bed against the back fence

We have two timber doors that must have dropped or swelled, they are catching on the floor. I need someone to take off hinges, plane and replace pls!

Hi, need someone can measure, supply, install laundry cabinets for a Reno project. See attached for floorplan.

Our outdoor balustrade has had some rotting that has occurred in isolated areas - railing needs to be patched and glued / builders bog in a few spots. Painting not required.

We have removed the carpet from our staircase, and it need sanding and refinishing. Total 15 steps Pls send me your quote price

Exterior wooden steps at at front of house need to be replaced. Also one wooden railing to be replaced.

Hi! I’m looking for someone to stain my pool deck. I have the stain ready. It was treated last year, so it just needs a bit of maintenance. Thanks!

Cabinet maker to do full cabinetry for van front (not including bed area) with 15mm light weight furniture board or similar. Does not include fitting. 1. Kitchen cabinetry - as in pictures (not including painting but including hinges) to house nut not include fridge, oven, sink. Total length 140+40 fold up, depth around 550 . Work top bamboo 28mm or thinner. 2. High level wall cupboards above bed through to kitchen on passenger side and length of bed area on driver side (not including painting but including hinges) 250 long by 40 deep on passenger side and 150 long by 40 deep on driver side 3. High level cupboard above seating area (not including painting but including hinges) 150 long by 40 deep 4. Box seating as shown with hinges (not including cushions or painting) 150 on long side behind front seats by around 40, 80 long on side of van Dimensions subject to final measurements before start agreed but differences to be minor. All to be scribed to dimensions of the van. NOT incuding the tall cupboard in the middle of the picture. Note - actual fridge is bigger. Fridge dimensions: Height 625mm, Width 475mm, Depth 550mm

Kitchen cabinetry for van made from lightweight ply - carcasses, kitchen top, doors and hinges and measuring to taper of van, but not installation or painting, taps or sink, or the vinyl finsh in pictures - just the wood. Someone with workshop who can do the project after final measuring up and deliver or I can collect in the van possibly. The design is shown in the attached pictures along with measurements. Changes to these meaurements to incorporate Bushmans fridge dimensions instead of the one in picture.. Fridge is slightly higher and deeper as in specs here: SPECIFICATIONS Fridge dimensions W 475 x D 550 x H 625 (mm) Minimum cut-out W 480 x D 550 x H 630 (mm) More info on the unit is in this self build video: https://tinyurl.com/3vxnv998 Also see my other task for full van cabinetry please.

Want to build a custom made letterbox on a recycled railway sleeper (similar to attached photo). Allow for; 1. All materials 2. Concrete into ground 3. Removal of old letterbox Happy to negotiate a price Due date: Flexible

Sand down a dining table and re-stain to lighter wood colour. Tools not supplied but materials supplied.

Need an experienced Carpenter or joiner to cut and fix a door and we need to cut 20mm more to open full and pack ONLY one jam 20mm more. My Gyprocker is coming Sunday to finish the shadow line so your earliest possible is appreciated. I have more to do with architrave and bits and pieces which can get you done & pay more cash Pls price me for this alone & the rest is extra

Need to a professional to quote a repair the internal wooden frame of a window. I will need someone to cut the new timber planks to match the existing size/design, remove the old ones with care not to damage the wall around them, fix them on the walls/window and paint in white. Please, see the pictures attached. thanks.

Need someone to replace our current shelves in the walk in pantry with cupboards The size of the walk in pantry is roughly 240cm (W) by 40cm (D).

Rates around $85 p/h but we quote per project. Finish most projects in a week or sooner. My company is seeking an experienced Carpenter / Builder who will be contracted to install or build carports, verandahs, pergolas and decks on the North Shore and Northern Beaches. - Regular work at excellent rates with prompt payment - Satisfying work with timber, steel and aluminium. - Approvals, plans & engineering already completed - Materials on site ready to start. Stratco's experience is highly regarded. Predetermined installation schedules provide well above average-daily rates for installers. Applicants must have their own tools and possess a current builders license (Restricted License is OK) and current public liability insurance. We’ve been in operation for 20 years and have a highly respected business. Job Type: Subcontract

Refinish table wood. It needs to b sanded and refinished

Looking for an experienced carpenter who can help replace some termite-damaged timbers underneath the house. There are a few timbers that need to be replaced. It will require onsite inspection

Hello, Could you please sand the door and trim (all the wood in the photo) and stain. Paint supplied. Will need a couple of coats