Find experienced local carpenters in Darlinghurst

Hello! I bought a chest of drawers of marketplace and they have been stained with a Honey orange. I’d like to stain it a more chocolate brown. I also would like some of the leg shortened so it’s a low boy.

Looking for an experienced carpenter to modify existing restaurant banquette seating. Task is approximately 6 hours which includes cutting, shortening, and adjusting seating to make it modular. Must have own tools and experience with similar work preferred.

Task: Buy & cut wooden panels to replace IKEA slats + install anti-vibration pads I need help fixing my IKEA MALM queen bed frame with the LURÖY slat base. Current issue: The existing IKEA LURÖY slats move and fall out of place with any movement, causing instability and noise. Proposed solution: Replace the current slats with three custom-cut solid wooden panels and install anti-vibration pads underneath to eliminate movement and noise. Scope of work: • Purchase suitable plywood / timber panels (approx. 20 mm thick) • Cut into 3 panels, each approximately: • 152 cm (width) × ~67 cm (depth) × 20 mm (thickness) - let me know opinions here • Remove existing IKEA slats • Install the 3 panels across the bed frame (using the existing centre beam) • Add anti-vibration / rubber pads between the panels and the bed frame rails to stop noise and movement • Ensure panels sit securely and the bed is stable and quiet Notes: • Bed size: Queen • Bed frame: IKEA MALM • Panels should replace the slats entirely • No structural changes to the bed frame required See photos of existing base, current slats and proposed solution

Assemble and Install IKEA Kungsfors shelving in kitchen. See attached image of the shelving. The substrate is brick.

Hi there, I’m after a professional to refinish a metal bathtub (cast iron or pressed steel) to a smooth, high-gloss enamel finish with a porcelain-like appearance. The existing surface is intact (no peeling) but has small rough/scratchy patches. Scope • Prepare surface for metal tub (clean, de-scale, light sand, etch/prime as required) • Spray apply professional two-part urethane/epoxy enamel for a uniform, high-gloss result • Renew the drain grating (polish, re-enamel, or replace to match finish) • Mask surrounding tiles/fixtures; thorough clean-up Details • Standard built-in bathtub • Apartment in Darlinghurst • Access for inspection/photos available Deliverables • Smooth, even, high-gloss white finish with no orange peel or brush marks • Neat edges and fittings; drain looks new • Basic after-care guidance and warranty details Please include in your offer • Photos of similar bathtub refinishing you’ve completed • Product/system you use (e.g., acrylic urethane/epoxy enamel) and curing time • Price (labour + materials), time on site, and warranty

I am trying to put a sauna in my gym, we have a space of 1200mm wide which fits the sauna perfectly. We need the existing cabinets disassembled and the skirting removed (skirting will go back on later so need to salvage) The actual space though narrows from 1200 at the opening to 1180 where the sauna needs to go. Wanting to shave off 10-15mm each side to fit the sauna.

Ive had a handrailing installed for an elderly relative and to better support their walk up stairs, this railing will need to be extended over the final step Prefer a horizontal finish. Pictures provided

In kitchen - need a builders block, cut down to size (is too large), and then needs to be hung as a shelf. And then cut other wood to size, and put up 3/4 further shelves.

Need somthing to make this area look better Black arched door way made of ply wood I'm thinking

Small coffee table — would like a much darker stain on it.

Hello, The wooden frame under my sofa is cracked (it's not completely broken, but it's fragile and could break if I sit on it). I need someone to repair and reinforce it properly because I don't have the right tools. The frame is a wooden bar that connects the legs of the sofa. It will probably need wood glue and a metal plate or screws to make it sturdy again. I am in Darlinghurst and am flexible in terms of scheduling.

Remove built-in office joinery, patch and repair walls, and transport materials to onsite disposal. Tools and experience required.

Looking for local carpenter to: replace sash lifts and locks on five sash windows + fix one stuck sash window - see if bathroom step can be levelled - see if upper section of bathroom draw can be added measure four doors (to replace with French doors) quote on: - hanging new doors - planter box build (courtyard) - small bench build (bedroom)

Prepare timber legs 700mm length on 600mm wide. 3-4 pcs,. I have cut them , you need to install on kitchen top so that we can put glass to cover the food , picture is just for reference

I had a plumber come recently and flip up a panel of floorboards in my office floor which splintered the wood. He went over the splintered area with wood putty but it is the wrong colour. I would love someone who knows what they're doing to come and replace or stain the filler depending on what would give the best result.

Need a temple and Webster bookcase, armchair and mini wooden laundry cabinet built. Instruction booklets provided.

Theres are some bed scratches on my floor which need repairing - I need someone to either fill the timber or sand down and varnish - Its okay if the colour isnt 100% since theres several different colours on the wood anyway - Just close to normal as possible Theres 3 key sections which need work done on - Can see pics for more details of the damage - The close up is what the scratches look like in detail (there's 3 sections like this) and then the zoomed out pics is how it looks on the floor from afar - They aren't hugely noticeable from far, you'll have to zoom in a little to see, but would prefer them gone!

I need a cabinet built around a big wooden structural pole in order for me to have storage under a water heater. I need to be able to access one side of the space via a cabinet door or something similar.

Require 2 cabinets 16 or 18mm MDF with White melamine Interior, and Black Veneer laminated exterior, with Hinged doors, divisions and adjustable shelves Cabinet 1=267x50x135cm Cabinet 2=267x40x90cm Requires installation on Mezzanine, stairs access Unsure about price, glad to hear proposals

Hello, I’m after someone who can make a cabinet to fit and suit the available space, would like a hanging rod and some shelves for storage. Dimensions in picture of what am thinking to have made along with another picture of the available space as is. The air tasker likely need to view the space in person first, location is Darlinghurst, inner city of Sydney. Budget negotiable depending on work required and materials. Thank you.