Find experienced local carpenters in Sydney Northern Beaches

Experienced timber floor repair + refinishing specialist (oil/water-based coatings) with ability to do spot sanding and colour blending. Repair mosquito-spray stains on natural timber floor by light spot sanding, colour matching/blending, and recoating only the affected boards without altering surrounding finish.

We have a few hours of finishing items in our kitchen to do before Monday. Prob 3-4 hours work. Need to trim and rout a panel for kitchen and cut and install kick boards.

Clean and re-stain ~50sqm deck. Mediumcondition

Hang up solar lights at back of house (one long chain), front of house (4 lots), and stain bamboo fence next to pool

Small carpentry jobs such as squaring up doors,gates and install a couple of rooms with skirting board.

I need a bench seat sanded back to the timber

2 decks One is 9x4mtr with 2.5 metre wide 8 tread staircase one is 13x1.5 metre with 2 x 1.5 metre wide staircases 8 tread Staircases are pine deck is hardwood Need thorough clean and prepare apply deck oil and stairs

Hi, I need a skilled craftsman or handyman to remove a single, narrow wooden strip/plank from my kitchen cabinet Please see the attached image, the wooden strip needs to be removed so that we can free up some more space for our fridge. Above the strip, there is a overhead cupboard. The surrounding cabinetry must not be damaged. The strip is a part of the painted white cabinetry, and is there for decorative / aesthetic purpose only. Power Outlet: Please note the power outlet below the strip. We will have to be careful to not damage that. Disposal: No disposal needed. I will keep the wooden strip with me. Please review the image before quoting. The job requires precision to ensure a clean finish. Required Skills: -- Carpentry / Handyman skills. -- Experience with kitchen cabinetry modification.

We’re looking for an experienced handyman to countersink square drive decking screws. Must have experience working with timber, and previous experience specifically countersinking screws on decking. All tools required for the job preferred. Price is a rough guide - open to offers.

Carpenter Needed: Raise and Level Garage Floor to Match House Level I am looking for an experienced and reliable carpenter to construct a raised, level wooden subfloor in an old cement garage space, bringing its height level with the rest of the adjacent house floor. Project Details • Location: Seaforth • Space Type: Existing single-car garage/storage area (currently a concrete slab). • Goal: Construct a timber-framed subfloor to raise the current floor level. • Scope of Work: • Design and install the necessary wooden support structure (joists and bearers) to achieve the specified height (540 mm raise). • Install a structural timber subfloor (e.g., plywood or particleboard) for the entire area. • Crucially, the portion designated for the Laundry/Wet Area requires a specific substrate: • Laundry/Wet Area (Approx. 1/3 of the space): This section must be sheeted with Compressed Fibre-Cement Sheeting (e.g., 6mm Ceramic Tile Underlay or similar) over the main structural subfloor. This is required for tiling and to comply with wet area standards. • Ensure the finished subfloor is perfectly level and securely fastened, adhering to all relevant building standards for stability and load-bearing capacity. • The finished subfloor must be flush with the existing house floor level, ready for final floor coverings/waterproofing. Specific Dimensions • Total Width: 2900 mm • Total Length: 10000mm • Target Height Raise (Gap from existing slab to new subfloor top): 540 mm • Please provide a fixed price quote that includes all labour and materials, specifically accounting for the necessary fibre-cement sheeting for the wet area. • The successful applicant must be a qualified and experienced carpenter. • Please detail the type of timber, subfloor sheeting, and cement sheeting you intend to use in your proposal. Please let me know if you have any questions or require a site visit before quoting. Thanks!

Need a carpenter on site to hang 3 doors (1xcavity) with new hardware and install architraves for 1 door and window and man hole cover in Willoughby. 8 hours

Pressure clean deck and stain it and stain outdoor setting.

It’s just a matter of putting up some floating shelves I think there’s four floating shelves and two heavier shelves I’ve got all the brackets that are heavy and the screws in the whole lot there’s two shelves outside the actual room just removing them and relocating them inside I have all the materials

Back deck needs sanding and stained with Merbau deck stain (I have the stain). I can move all furniture. Requires before end October. Deck: 5.75m x 3m

Hi there! We’ve recently moved into our new home and are looking for a skilled carpenter to help with a few small jobs around the house. Tasks include: • Installing 6 new door handles in new locations • Installing kitchen cabinet handles (approx 20) • Filling gaps around windows (“no more gaps” work) We’d love to find someone who is detail-oriented, tidy, and happy to work on an hourly basis. The jobs are fairly straightforward but require care and precision. We’re flexible with timing and can work around what suits you. Location: Manly Rate: Please quote your hourly rate.

I have the material the timber for the steps to extend the width of the stairs I have the timber to do so I would need to be attached family to the existing Stairs and supported silicon to a with wider steps , would need to supply top and bottom rail with lattice insert for handrail and build a lattice handrail with top and bottom edging similar to decks surrounds but not as high and sloped in line with steps

To build a freestanding room that I can use as a art area with a door not attached to existing garage would require a large secondhand window to allow for light within the area it’s a single garage and the front is not used the rear is used for tools it’s single wide and doubling length and I just wanted a room to use as prof Studio has an existing concrete floor I don’t want it attached to the side wall of the garage it’s lattice and timber framed it just has to be freestanding independent but a walkway would need to be beside to access the garbage bins to be put out and to be able to carry things through to the rear of the garage materials for it would be need to be supplied by the person door job inclusive with materials. Can use recycled materials. Existing concrete floor

Hello! I need someone to stain (2 coats) the outdoor wood at our home. Includes driveway walls, two balconies and one jetty. 5-6 hours work. $50 per hour 1) carport steps and retaining wall 2) middle balcony 3) top balcony 4) jetty

Clean and sand back existing deck stain. Restrain similar colour to what it was. We will pay for stain, may require a couple of days not sure

Need about 30mm straight cut off of a 60mm wide, laminated melamine cabinetry panel, to fit integrated dishwasher. You have table saw or v fine tooth circular saw to do the job. Need to avoid cracking laminate and melamine so assume you’ll do shallow scoring cut(s) and main cut. You provide the tools