Find experienced local carpenters in Ashburton

Looking for someone experienced to securely install a dartboard cabinet onto our outdoor rendered/masonry wall. Cabinet measures approx. 50cm W × 64cm H × 12cm D. Need it positioned at the correct dartboard height, levelled and securely fixed to the wall. Please bring appropriate drill, masonry bits and fixings suitable for the wall. Easy access to installation area. Dartboard/cabinet supplied.

Square door - height 37 cm, width 43 cm. Needs handle. See attached photo for reference

Make a freestanding hutch to house microwave and give more space for appliances

Water stain on ceiling. Could you provide a quote on the onsite inspection ?

Replacement of lawn edging timbers with treated pine. Type of gardening: Other Size of garden: 50m²-150m² Has green waste bin: Yes

Looking to install a couple of wooden panels on brick walls as a feature stripe

We need 4 overhead kitchen cabinets made the dimensions are 92x72x32

Our large William Russell front door (1200x2340mm) needs light sanding and restaining due to UV damage from western sun. The difficulty is it’s two tone vic ash and jarrah veneer, so it requires careful application. The part on right should ideally match the frame colour and the left should only get a non yellowing clearcoat. The indoor side is a much closer match to frame but also browned over time. Prefer someone who has done a door like this before.

Build a table around this with a latch to access the aircon. Same colour as the timber on the couch next to it.

I need about 8-9 floating shelves installed in a space next to a fire place Space measures the 1650 wide / 510 deep Mockup attached of what I’m looking for ( with a few extra shelves. Shelves could also be black. Laminate is what I’m after

I need someone to assist in removing and installing a new laminate benchtop and a couple of cabinets. This task requires someone with experience in installing benchtops or a cabinetmaker and I am curious as to whether one person can do the minor plumbing (new sink, faucet and water filter), or if I need a separate plumber for this. I think this job is straightforward as everything is pre cut to size, it's more so cutting holes for cooktop and sink. It's really an assembly job and getting everything right. I imagine this is a fairly quick job for someone who knows what they are doing. Please provide quote, detail your experience, what elements of this task you are comfortable completing and your availability. You will obviously need power tools. Task breakdown: remove induction cooktop carefully (I believe this is plugged in under counter - no electrician required) remove sink and tap (to discard) remove existing laminate benchtop (to discard) install new laminate benchtop over existing cabinets which has been pre cut to size, join and seal professionally cut holes in new benchtop for cooktop (same location) and new sink, (same area, different location that requires some of the cabinet below to be cut out too) put the induction cooktop back in and seal with appropriate heat resistant seal insert and secure and seal new sink to new benchtop attach double water filter to cabinet under sink, connect plumbing with new faucet in new sink - I should have all parts for this but as the location of faucet is changing this should be investigated more thoroughly assemble 2 kaboodle cabinets (one is for bins - please set up, the other is microwave and drawer) and join together, secure to floor and wall to create small breakfast bar (I can assemble if needed) install pre cut laminate benchtop over breakfast bar cabinets, join and seal secure spare wall cabinet (pictured) above fridge in corner (screw into wall) cut one 900 slice through pine benchtop for laundry area

Requesting quote for kitchen and laundry modifications in a recently renovated townhouse. Please see attached photos for details. Kitchen: - Install new fridge cavity - Convert old cavity to drawers and microwave shelf - Convert bottom shelves to drawers Laundry: - Remove upper shelves and replace with smaller one above sink We have details of the original installers to get matching handles. Doors are matt white. Placeholder budget, please disregard. Please provide time and cost estimate including materials.

Custom Joinery – Under Staircase Bench & Storage Looking for an experienced joiner/cabinet maker to design, build and install a custom under-stair bench with integrated storage. Scope of works includes: • Measure, manufacture and install a built-in bench cabinet to fully infill the nook under the staircase, finishing flush with nib walls on both sides • Approx. 400mm high bench seat with one row of three large drawers • Drawer fronts in Polytec laminate (Cassentino Beach Woodmatt or equivalent) with clean, handle-less finger-pull detailing • Cabinet to sit at floor level with a 20mm shadow line (no kickboard) • Supply and install a beige upholstered seat cushion suitable for a child reading nook • Plasterboard and finish the underside of the staircase, including stopping, sanding and paint-ready finish to match existing walls High attention to detail required to achieve a seamless, built-in look. Materials, workmanship and finish to a high residential standard. Refer to AI generated image as a guide. Please include examples of similar joinery work and availability to quote on site.

I need seven matte black floating shelves strong enough to hold books. Measurements: approx W1640mm x 510depth - thickness - up to you as long as they’re strong.

I’m looking for an experienced handyman / deck specialist to clean and stain my outdoor timber deck. The deck is ~30sqm with some weathering and wear. I’d like it properly stained so it looks refreshed and protected. I will clear the area and pressure wash it so it is ready for work when you arrive. Scope of work is to apply one coat of stain. Second stain to be decided if required on a separate date - quote on one stain for this job. I will provide the stain. All other tools and equipment to be supplied by you.

I need carpenter or handyman to build a box to cover the conduit

I need someone who does this type of thing for a living. Not a home handy man who wants to give it a go like me. I've just replaced the blades on my HalfCo WoodMaster 2015. I need the blades adjusted so they will cut flush. There are only two blades. I can bring it to you if you are in the Glen Iris 3146 area.

I need a carpenter for a few days to help build a deck — I can assist with the work myself.

Garage storage with doors, bedroom robe shelving, potential built in bench seat near window bay too.

Sand and restain deck x 2 Upstairs only needs light sand Downstairs has some paint marks 3.2 x 2.6