Find experienced local carpenters in Ascot Vale

We recently had our home recarpeted - need our internal doors removed, trimmed and reinstalled as they currently don’t close. Two level house - doors will need to be taken downstairs & outside to do. 5 doors in total.

I recently purchased a Koala side table (you can see the product link here: https://koalaliving.com.au/Riviera-Sofa-Accessory-Side-Table). Unfortunately, I botched the measurements, and there's a bit of a gap above the sofa arm as you can see in the photos! While Koala has told me that it would accept a return of the product, my preference would be to keep the table as I otherwise like the look of that. However, for it to be feasible as a side table, I would need the height reduced by 60mm. I am not precious about how this occurs (eg if there would be a disturbance in the grain. Could you please let me know, based on the product specifications and my intended requirements, whether this would be feasible, and if so, your quote for performing the modification?

Looking for quotes at this stage, which is why the budget is at $5. A friend has moved into an early 90s build brick apartment in Ascot Vale. To make room for the large fridge and a new dishwasher, part of the kitchen has been demolished. She is looking to fill the height with a combination of straightforward open shelving and cabinet shells to match the rest of the 90s style kitchen (plain chipboard). Also add doors to the space currently housing the microwave. We are looking for someone who is communicable and eager to work.

We require a carpenter to build some cabinets and shelving either side of our chimney in our lounge room. Please see the attached photo of the our room along with some photos showing what we’d like built.

I’m looking to see if I can have a study/office book built into the wall next to/under my stair case.

Seeking the following to be carried out. - decking to be sanded and resealed - dining table to be sanded and resealed - internal doors to be adjusted as they are catching - 2 small gates to be built and installed on front fence See photos

Need a deck scrubbed clean with tannin cleaner and then deck cleaner to remove old stain so that the deck can be stained again. The main deck is 6100 x 3100 and steps also included. The picture showing the cleaned section is what is needed, which was achieved by applying tannin remover with scrubbing brush, waiting for 15 minutes and then scrubbing brush again followed by pressure washing and then deck cleaner applied with scrubbing brush for a further 15 minutes and then pressure washing again.

Stain our treated pine front fence -Measuring 9m x 1.2m -Deep walnut brown (must supply stain) Let us know if any questions

I put together a cabinet with my friend. The top of it was put on backwards and I can’t manage to take it off myself and turn it around. I need someone to remove the top of the cabinet as seen in the photo and trim it around and screw it back in.

I need my unassembled Ikea IVAR shelves sanded stained and sealed. I can supply the stain and an outdoor area to work. Happy to have you pick it up if you wish to do it at your own location.

Wooden deck needs some wood panel replacement very small panel that needs to be replaced

Recladding the side and front of existing shed in silver top ash shiplap. Installing an aluminium glass sliding door to the front and a non opening window to the side. Wall height appx 6*2m, front 3*2-2.4m h. Will require some minor framework.

Need back deck to be cleaned and re-stained. About 40m2 in size. Tasker will need to supply own equipment to clean and apply stain. We will supply the stain.

Have two slabs of laminated hardwood timber benchtop (33mm thick; 600mm wide). Need someone to cut and install them with a mason's mitre to create an L shaped benchtop around 3.6m x 2.2m.

Decking needs sanding and staining. Couple of photos attached. In addition, there are two more areas for the same to be done. Need quotes and timescale

Hi, I need to create a space for a dishwasher to be installed. The baseboards of the cabinetry need to come out

Have pieces of 600mm wide laminated timber (hardwood) for kitchen benchtops - they need to be cut to length with a masons mitre and biscuit (or other) joint.

- Qualified Carpenter or Experienced Handyman needed to lay EcoDeck decking. Needs to be experienced Start tomorrow

The bottom slats of a dog house have broken and I’d like them repaired (or a new one made). It’s 2 pieces nailed together but the wood has split where the nails were screwed in. The floor slides in the bottom of the dog house so the rest of the house is unaffected. It is slightly raised (that is what the small rectangle in the middle of the back of the piece is). Not sure of measurements. Please list your price including cost of the new timber (if required).

Two of our kitchen cabinet doors are warping and splitting from dishwasher heat. Need a skilled cabinet maker to source and replace the panels