Find professional window and door services in Sydney City CBD

Fix the fallen cabinet door and apply silicone between the two glass panels.

We have some brass and some acrylic (sticker) letters that we need stuck onto our doors. Even the brass letters are stick-on. Need someone that knows how to evenly, in line, and right spacing, attach letters to doors.

Building a desk, fixing 2 door handles and attaching safe to wall with heavy duty fixtures - View all the details of this offer: https://www.airtasker.com/offers/01JSK0VQ3888GA3D4R676FW0JP

Door seals of 5 meeting rooms with sliding doors need to be replaced. Location : Sydney CBD No Parking onsite

Hello, I would need an experienced carpenter to install a double sliding door onto concrete walls of a study room. All the parts are on site parking is also available so we will be taking that off the costs. Photos will be posted below.

We need to replace the door handle on a meeting room. It either needs to be fixed or replaced. Must be completed between hours of 11am-1pm on Friday 28th March

Sliding door inside gyprocker door cavity has come off its rails. Wheels are possibly broken In a shop in the city. Unfortunately, no parking available. Flexible with hours.

I am looking to close off my car port with a sliding door in front.

Hi there, Am looking for an experienced sign and window display installer. I am needing 1 decal installed at the front of a retail shop. The decal is 3metres long and is quite high - please see image for reference. The logo will go on the black block above the front entrance. For the window display install. I am needing one item suspended in the window. The item is all ready to go - just needs someone who can hang the fishing wire from high ceiling fixtures. Urgent job. Serious enquiries only. Thank you in advance.

Need someone who’s experienced with installation decals on windows - we have the material already. Looking for someone to do the install - looking for a clean finish. No bubbles etc.

I live in Sydney CBD near Town Hall, and parking will be provided. I’m looking for a skilled carpenter to fix three doors that aren’t closing properly. These doors may seem simple but are quite heavy, so experience is essential—no amateurs, please. One door likely needs sanding at the top, while the other two may require hinge adjustments, but I’m unsure of the exact issue. I need someone who can assess and fix them properly. You will need to bring your own ladder and tools.

3x sliding doors 2400x860 Then move rubbish to the tip Pickup location: phillip st, sydney NSW 2000, Australia Drop-off location: Revesby NSW 2212, Australia Removals size: A few items Stairs: At delivery Pick up time 8am to 6pm Then at Revesby, take old windows, doors to a bingo tip (5 mins drive) Rubbish are 3 hollow doors 2040x820 1 solid core door 2040x820 3 window frames 1200x1800 1 window frame 2600x1200 1 sliding door frame 2700x1800 Architraves 5.4m long but can be snapped off if needed. They are water damaged

Install door handles to two doors (2 sets of handles). The mullion is Aluminium 50mm wide x 50mm deep. You can see in the photos the cylinder is install and hole cut already. Just need someone to position and screw into place

Fix the hole from the bathroom door

Need someone with experience to remove and replace the window regulator in the left front door of my kia rio 2013. I already have the part. You just need to bring the basic tools like a screw driver and a clips remover. Job would take less than 30 min. Your job is to: 1) Remove the internal door panel cover (3 screws and few clips); 2) Remove the moisture protective plastic; 3) Remove the old window regulator; 4) Install the new window regulator; 5) Put back the moisture protective plastic; 6) Reinstall the internal door panel cover; 7) Test all functional ensuring that the electric window is going up and down normally.

Need to install doggy door into pre-existing glass door.

Open timber Panel to access roller door We have broken Roller Door in Small Café near Town Hall Station. Timber panelling is covering roller door top mechanical parts. Need to cut timber/Gyros panel to access roller door From my experience with right tools it shouldn't take more than 15-30 min .

Paint door and remove marks, detach blinds so I can throw away, help put rug under bed, change lightbulb , hang small painting (need ladder and paint brush) change lightbulb

Fortify the metal rail for sliding glass door.

9AM FRIDAY 24TH We have several certificates and some artwork and door hooks (10) to be hung in our new office. Most will be hung via Velcro strips stuck to wall some with screw and plugs You supply plugs and screws We supply the Velcro tabs We supply metal door hooks Must be 9am Friday morning Sydney CBD