Find experienced local tradies in Outer East Melbourne

Brick wall 6.5m x 4m (check pictures)- 600 mm high Need to render. Please provide full cost

I have a built in wardrobe with sliding door and it has a few shelves on the left hand side and hanging space for the rest. I want to add additional shelves and maybe draws to optimise space and I do not need hanging space. the dimensions are as follows : depth available : 40cm width: 170 cm height : 160cm The existing shelves on the left are 35cm wide and 160 cm high and it has adjustable 5 shelves with pinholes. The top of the entire wardrobe length has a 160x40 board I want to add 2 additional columns of storage. one needs to be 60cm wide so a unit like this can be put in : https://www.bunnings.com.au/lugna-white-4-drawer-2-shelf-insert-kit-to-suit-600-x-380mm-cabinet-shell_p0666975 Supplies you need 160x40cm melamine boards - 3 or 4 ~70x40 cm melamine boards - 5 if you can work out putting in draws for cheaper than the unit feel free to quote. The price I am putting includes the following : 160x40cm melamine boards - 3 or 4 ~70x40 cm melamine boards - 5 any other additional screws, wall mounts, pins,glue etc for putting it all together and finishing it. Labour

Plasterer needed to lay sheets in kitchen. Proposed layout pictured (3 on back wall, 1 horizontally on the window side). Back wall is 2890 x 2400 Kitchen wall is 2838 x 1100 Happy to pay for sheets separately or to buy them. I believe the wall behind the oven will need cement sheet due to gas stove, but can discuss when assigning the job.

1 room to be rendered. 3 new areas (were windows) to be blended in. Open to colour change but undecided at the moment. There is a large opening, a doorway and window in the room. Room is 8m x 6m, ceiling height 2.4m. Keen to get done asap.

Dear Airtasker, my ceiling was water-damaged and needs replacement. I would like to get it done soon but flexible with time. I think the minimum area to be replaced is about 1.8 x 0.8m.

Need a hole repaired in the plaster plus painting (see photo)

One wall only need render in corner. Have render on site but not tool

Refer the pictures. A small hole and a broken door frame. Painting should be done as well

1 metre x 2.2m of plaster to be installed in ceiling of ensuite [following installation of exhaust fan for ensuite] I have someone to put the fan in and the ceiling as been adjusted to fit the fan but need someone to remove plaster around and put in new plaster. plus 50mm cove Plus painting once plaster installed And small clean of remaining mould on little section of upper wall and some on ceiling

Experienced Handyman Needed to Secure 2 x Shelves to Plasterboard Wall I need help installing two shelves onto my wall at home. Shelves and wall space provided in the images. The shelves must be fixed securely into studs—these are heavy shelves and cannot come off the plasterboard wall. Shelf measurements: 14.5cmx157.5cmx4.5cm 13cmx158cmx4.5cm Important: • I don’t know what’s inside the walls (wiring, pipes, etc.), so I’ll need someone who can safely assess this and use the correct fixings. • One of the shelves has a small split in the wood (see photo). Thought it was worth mentioning in case this has implications for the install. Looking for someone with: • Experience installing shelves into studs • Ability to assess wall structure safely • Their own tools and fixings Any questions, just ask. Thanks. :)

Looking to have licensed electrician to fit off 5 power points and install 2 power points in bathroom for led mirrors, more work to be considered afterwards

Fix hole in the plasterboard in bedroom. Plaster and paint.

Replacement of outdoor power point. Does not need built in timer like the previous one, a regular one will do

This is just for the fabric installation. Replace fabric on an outdoor fold-arm awning. 3m x 3m Would like it to be waterproof and prefer a grey or similar * Budget has included fees. You supply fabric and install Note: this is a reposted job during to issue with old post.

Supply and install plaster patching as per photo. Include three coats and sanding. Ceiling piece from where the closet was needs plaster replaced as not level with main ceiling.

Hi, I’m looking for a renderer to apply a base coat + top coat acrylic render to an existing rendered wall (approx. 138 sqm) at a single-storey property. ( start This week or next week ) Details: • Location: The Basin VIC • Wall Condition: Existing render in good shape – no major repairs • Height/Access: Single-storey, no scaffold needed • Work Required: Surface preparation, supply and apply top coat, clean up • Render Colour: Client is deciding between Shale Grey, Dune, or Surfmist (light neutral tones). Please confirm you can match or supply similar.

Large cracks in three separate locations on the exterior walls of my home were stitched (This is already done). Task : Need someone to do the rendering for 3 locations show in the images

I have removed couple of walls and need to relocate 3 to 4 power points of removed wall alao need to add 6 down lights

Small bedroom with two main walls that had a tv, shelving and mounts taken down. Requires filling of gaps, plastering with holes in the wall and painting.

Hi! I'm looking for a friendly and experienced carpenter or window repair expert to come by and do an initial assessment of some rot damage on an old bay window with awning sashes. There’s a bit of work needed both inside and out, and I need someone who can help figure out the best approach before we lock in the full repair. What I know so far that needs attention: Partial sill replacement (including some internal inlays) Inlay work on both corner coverboards (inside and out) Partial mullion replacement (where the sill meets the transom) Partial transom replacement Repairs to left-hand side sash joints Replacement of the glazing bar on the LHS return panel Replacing damaged or missing trims and glazing beads This job is just for the initial assessment, with further work to be discussed and quoted after. Est. Budget: $2,500 (for full scope of work)