Find experienced local tradies in Glenroy VIC

Require a over hanging power point installed

I would like two double power points installed inside home, plasterboard wall existing power source nearby in cavity

We have a newly rendered front fence that we would like painted in latex bridging paint color (colorbond) Surfmist. The fence is 15m long with 400mm high walls and 6 pillars 1500mm high 450x450 both sides obviously.

1. Outside Works a) Install supplied bulkhead to carry power from house to main pergola support post. b) Install two 90mm single GPOs on the support post and one double power point at approximately 1800mm along main pergola support beam. c) Install 1 x double power point on brick wall opposite bbq d) Install 2 x 2000 watt electric heaters, one to new bulkhead, one to wall e) Install 2 x LED Batten lights under pergola wired to existing switch f) Install new flood light wired to existing switch 2. Install New GPO behind Television in Lounge.

Due to the high power requirements of this unit (8kw), it requires a dedicated circuit with a minimum 40A breaker for safe and reliable operation. This unit must be hardwired by a licensed electrician to meet electrical safety requirements. For installation end of June

Assembling of sauna https://www.luxoliving.com.au/tarni-2-person-traditional-finnish-outdoor-sauna From the 23rd of June onwards flexible on time If you know electrician that would be good please quote for that thank you

I need a power point installed into the pantry and two light switches which broken to be replaced

I don't have enough power point in the kitchen. I need 1 power point near the switch

We need someone to finish stripping terracotta paint off our concrete porch. As you can see from the provided photos, a majority of the paint has been removed, but details such as in-between balustrades, the front steps and the front door step still need to be done, as well as scraping off any remaining patches. The porch is 2870mm wide by 1700mm deep (not including the two front steps in these measurements). Additionally, we have eight white balustrades and the top rail that will also need to be stripped. These were painted before we moved in here and look terrible. We have very few tools/remaining paint stripper for use, so the painter will need to provide any supplies they think they will need for this job.

I have an already cut out wall, which needs a 2 plug PowerPoint to be installed

Render came off the ceiling under the porch, need the whole area patched up neatly.

Replace old power point with new in kitchen

Looking for a purpose built wardrobe measuring 3300 wide and approx 2320 high for a bedroom wall. Open space easy to work in and flexible with dates.

I need the downstairs rumpus room which has brick walls to be plastered and patched up ready to be painted. The ceiling of the room needs to also be patched up ready for painting. I need some quotes and estimated days to complete.

Patching a few holes , couple of exys and internal ceiling for a porch and alfresco , Stopping up sanding

Hi, need a plasterer or handyman to plaster, seal and paint 3 holes in the ceiling, 1 in the laundry and 2 in the garage. There is also a hole in the laundry where the fan was taken out which needs to be re-installed into the ceiling. Please provide quote asap. Thanks

Have a deck built and posts concreted in ready for roof frame and roof to be completed

Plastering is need for two parts

I'm after a plasterer to install plaster boards in a bathroom 2400h 2700w. Tiles will go up to the ceiling and there will be a shower area, and bathtub. Materials can be supplied. Please only people that can and want to get the job done apply as we have to have it ready for waterproofing this week. There is also another one or two plasterboards to be replaced on the other side. Thank you

Installation of 1 PowerPoint in bedroom There is one on the adjacent wall and another on the same wall but on the other end. Single story home with manhole access I have uploaded the floor plan with an X for where I want it to go Need it to be done by a licensed electrician must be able to provide certificate of electrical safety