Find experienced local tradies in Burleigh Heads

32 amp breaker and power point, single phase, needed for an ev charger. Charger has a built in RCD. Panel has space for a breaker. Install onto concrete wall near panel

Gyproc and plasterer to clad. The room is 3.3x2.8x2.4. There is also a bathroom that needs wet board 2.8x1x2.4. Job is in Burleigh heads. I am wanting knauf 13mm sound check on two walls. All carpentry and electrics are complete. Contact for further info. Burleigh heads Qld. Price to be negotiated

I have 5 holes in our internal walls that need to be patched up and painted over. There’s a cut in the roof in our powder room that from an electrician that needs to be fixed also.

Prefab Outdoor Sauna installation  Purchased from LuxoLiving 'Waru 3 Person' Overall external dimensions 1500x1500x2000mmH All parts have been delivered and unboxed Electrical installation by others  Assembly instructions included, all screws provided Tools you'll need, rubber mallet, nailgun, power drill, level, wrench, ladder Installation of the external waterproofing film & tiles (which are simply nailed on)  Installation of internal bench's I can assist when 4 hands required 

Chasing a plasterer to set and install cornice to a Reno, cornice and setting compound on site. Can also supply angle and trims required.

Quote Needed - Supply and Install Internal Stairs + Handrail + Balustrade in Commercial Building Must be build to commercial code and provide correct forms for certification We're on a budget: $5000-$8000 We're thinking... 1. MDF stringers 2. Polished Blackbutt Treads 3. SS Handrail/Balustrade OR Hardwood

Needing everything re sheeted and set Best to come have a look 2 / 4 Burleigh glen crt

We need someone to build and install a commercial set of stairs - balustrades - handrails. Thinking white MDF stringers and risers, and maybe Hardwood treads...open to discuss We can provide materials if required. Must be built to code and must have all forms signed etc... Can provide plans on request. Budget $3000-$4000 labour (plus materials) We are looking for quotes...so may post this a couple of times

In the first picture, you will see a single plug behind the fridge. I am installing a range hood nearby and will need that one to be split, ie change from a single to a double power point. In the second picture, I need one more power point to be created underneath in the cabinet for the new dishwasher. That will require tapping in from that existing circuit. It should be done on October 7 or 8th before my tenants move in. It can be done at a later date but not ideal. Please specify your price and date of availability.

Rendering my fence, top, front, back and side

I need my exterior wall concrete rendered. Size: 6900 long x 2000 tall Front, back, top and 1 side.

I need two kitchen power points installed and one power point moved up a wall in the lounge area - two story house 3 years old in paradise point Gold Coast - only on October 2nd

Small holes need plastering, averaging 12 plug sockets and few smalls on a ceiling from old lights .

10 meter long planter box wall needs rendering.

We urgently need our rendered wall repaired to match the finish (we can do the painting). We drilled and patched a couple holes ourselves but it’s not exact as you can see The texture cement render needs to be more consistent we are told - so we can get our bond returned. Might just need to drill the holes out again and plug it to match unsure

Require some plaster setting works. All sheeted and ready to go. Just set and sand so it is ready for paint. A couple of small ceilings in 3m x 3m approx and another 5m x 5m approx. A bit of patching. Happy to discuss final price once you have a look on site if that helps. Thanks.

I need a power point outside. The house is single level brick veneer and has good access.

Build & Render 1 x L-Shape Fire Pit Seat + Build & Render 1 x Pool Arched Way Seat; Full Landscape Architecturals upon inquiry.

We had a roof leak and had to pull the gyprock sheeting out of the roof of our spare wardbrobe. Need the roof panel replaced and the 2 side panels as the edges got wet.

Must be QBCC Licensed and have own insurance Need a patch of a warehouse in Burleigh Heads rendered and painted. Must be done THIS WEEK only. This is what needs to be done: 1. Silicon patches scraped and removed 2. Cement base primer is to go over the Patched repaired work section  3. 2 coates of paint that matches the rest of the building You’ll need to organize hire of a cherry picker to access the spot as it’s high up. We also just need something in writing from you to send to the body corporate so they know what's being done and can approve it before you start. Please send me any questions, thank you