Find a local software expert in VIC

We have a logi conference system consisting of: - Logi meet up bar https://www.logitech.com/en-au/products/video-conferencing/conference-cameras/meetup-conferencecam.html - Logitech room mate https://www.logitech.com/en-au/products/video-conferencing/room-solutions/roommate.html - Logitech TAP IP logitech.com/en-au/products/video-conferencing/room-solutions/tap-ip.html Its all installed however we are needing an IT specialist to come in and get it all working. Proper plug and play connected to Microsoft accounts for the team to use.

Laptop hard drive replaced with new hard drive contents changed over to new hard drive office/Windows reinstalled

Wanna get my TV connected to the net via Cat6a Ethernet cable. TV is 5 to 6 metres away from modem. House is single storey & tiled roof.

Experienced Data Cabler Needed – 4x Cat6A Ethernet Drops Looking for an experienced and properly equipped data cabler to install 4 Ethernet drops in a single-story house. All cables and wall plates are provided by me: * Panduit Cat6A cable * Shielded Cat6A keystone jacks * Clipsal style wall plates Scope of Work: Central Hub: Family Room (where all 4 cables start). Endpoints * 1 x drop to Lounge * 1 x drop to Entryway * 1 x drop to Bedroom 1 * 1 x drop to Bedroom 2 House Details: * Single-story home * Raised foundation with accessible underfloor space * Some roof cavity areas are tight, especially near the lounge external wall Preferred Installation Approach: I prefer to avoid removing roof tiles if possible. At the Family Room wall where all 4 cables originate, there appears to be a timber noggin/blocking inside the wall cavity. Since there will be 4 Cat6A cables together, I would prefer to minimize drilling through structural timber where practical. If possible, the preferred approach would be: * route cables down from a more accessible wall cavity first, * use the underfloor space for the main horizontal run, * then bring cables back up into the final wall locations. Requirements: * Experience with tight ceiling cavities and underfloor work * Proper tools for wall fishing and difficult cable routing * Experience terminating shielded Cat6A correctly * Ethernet tester to verify all runs after installation Experienced data/telecom cablers preferred.

Looking for a registered cabler or electrician to install two new RJ45 data points in my single-story home. Scope of Work:Supply and run Cat6 ethernet cabling.Install cables from the current router/modem location to two separate bedrooms.Terminate cables with neat, flush-mounted wall plates at both ends. Property Details:House Type: Single-story house. Walls: Standard plasterboard internal walls. Requirements:Must hold a valid Australian Telecommunications Open Cabler Registration. Please bring all own tools, testing equipment, Cat6 cables, and wall plates.

I am looking for someone with experience with smart house integration. Currently moving over to home assistant green and have some devices that do not sync. Also need to configure Alexa to home assistant for voice over to work with all devices.

I have an existing build with an rtx 3060 and a b550m pro vdh. I recently was given an rtx 3080 but had thrown out my power supply cables. I have purchased a new power supply and need someone to install both and sanity check its working after.

Updated - 20/05/26 1. Remove 6 existing monitor stands from desks - pictured black (unscrew and detach monitors from current stands, set aside) 2. Attach 6 new monitor arms to desks - pictured White 3. Unbox 6 new monitors and attach to the new arms (VESA mount, screws included) 4. Adjust monitor height, tilt and position for each workstation 5. Reconnect all cables (power, DisplayPort/HDMI – existing cables will be in place) 6. Confirm each monitor is working before finishing 7. Dispose of or stack unboxed packaging neatly **What you'll need:** - A screwdriver (Phillips head) – a drill/driver would speed things up - Comfortable working at a desk height - Patience for repeating the same steps 6 times! Melbourne CBD **Estimated time:** 1.5–2 hours

I've purchased screenline colourbond privacy extensions and when they arrive, task is to install them

Support with Amwin Software update and transition in business.

Hi Need to upgrade wifi system to install wifi Mesh. Thank you

Looking to add a data point (or just need to get an ethernet cable extended from the main NBN box in the master room to the living room for TV, as currently TV is running on Wifi and I need to be hard wired. Main problem is nbn box is located on opposite side which is inconvenient. Single storey house -Tiled

Need data cable installed from the router in the garage to a bedroom. Single story house. With you supplying the cable, data wall plates.

Two lan cables need rj45 connectors

Need three cat6a data points installed in single floor home.

I have a shop environment which has internal plaster walls and a plaster ceiling. I have internet which is installed but needs to be moved to a location that is more out of the way. So I need to have a network cable run approximately 30 meters

I recently upgraded my motherboard and CPU, and purchased a liquid cooler. I’ve attached the CPU and cooler to the motherboard, and now I just need someone to help fit it all back in and reattach the cables.

From the gateway switch, run cat6 ethernet cable throughout the single storeyed house and connect the existing LAN ports and install new LAN ports

DATAPOINT INSTALLATION - Supply of data cables. - Supply of data wall plate - 1 x Cabling and installation of required data point on or in wall, up to a maximum cable distance of up to 5 metres. - Terminated and connected to network rack in existing patch panels or utilising repurposed data points. - Includes patch cables at scheduler end if required. Includes patching to client's network PoE switch where required.

I have a mid 2011 desktop mac which I need to update the software for, in order to install other apps. I’m unable to as it’s unsupported/ too old. If anyone knows how!