Find experienced local roofers in Weston Creek

Repair Roof Leak – Labour Only Looking for an experienced roofer to repair a leak between the main house gutter and the alfresco extension roof. The extension roof has been installed underneath the gutter, and water is leaking through the connection. It may require proper flashing underneath or sealing. Please see the attached photo showing the leak underneath and roof top. Red marking as leaking area. Budget: $350 for labour only. Materials will be paid separately.

*Photos will be uploaded tomorrow, Thursday 23* I'm looking for someone experienced with metal roof insulation/sarking to help stop condensation dripping inside my garage. The garage is a small double garage with a metal roof. During colder weather, condensation forms on the underside of the roof and drips into the garage. As far as I'm aware, this is condensation rather than a roof leak. I'm looking for someone who can: • Inspect the garage roof. • Supply and install a suitable insulation/sarking solution to reduce or eliminate the condensation. • Ensure it is installed correctly to avoid moisture issues or mould in the future. I've looked into doing this myself, but I've decided it's beyond my skill level and would rather have it done properly. Please include: • Your experience with this type of work. • Whether the materials are included in your quote. • Any questions you have or if you'd like additional photos before quoting. Happy to discuss the best solution if you think there's a better approach than what I've suggested.

Mount starlink dish on the roof and run cable inside the roof and put through ceiling, the unit is a 2 storey so will need a big ladder, has harness points on the roof to hook onto, if you can provide the mount great otherwise can provide, have everything else ready to go

Gutter clean for double storey house but only one side required. Total two areas

Gday Andrew, thanks for getting in touch. I'd be pleased to assist again. Can complete 29 June or 3 July if either of those days suit? Cheers, Ben

Vacuum removal of loose insulation from a ceiling. Approx. 200m2. Need your own dust removal machine/ducts/bags. Job will be coordinated with re-roof to provide you full access to you will not need to remove tiles or battens. Only interested in competitive quote.

Need all my gutters cleaned for my single storey 3bed house in Fisher.

Looking for someone available today before the rain arrives, to collect the leaves on front lawn/garden and clean front gutter of house.

Main task: * Roof eave has come loose/blown off in the wind — needs to be repaired and securely reattached * Please assess if it can be reused or if replacement materials are needed *Clean gutters Additional tasks: * Hang a few paintings * Install 2–3 floating shelves * Raise curtain rods (current curtains dragging on floor) Would prefer someone who can complete everything in one visit. Please bring your own tools.

I need help installing polystyrene underfloor insulation under wooden flooring. There is a cavity under house (crawl height) and the area is about 70 sq m.

Patch and paint hole in roof in garage

Replace laserlite roofing some panels damaged from branch drop and hail. 15 panels approx measurement is: one section 4.2 and another is 3.6, hence why a site visit is needed for quotation purposes. Pls note the budget estimate is based on what I think the materials only would/could cost…..?

Removal of blow in insulation in the roof

Old Laserlite has hail damage and requires replacement Rear deck is approx 2.9m wide x 6.6m long Front porch is approx 2.5m wide x 2.7m long.

Remove the old roof insulation

Remove the old insulation

Remove the old insulation

I’m replacing an existing slide-out rangehood with a 60cm integrated / undermount ducted rangehood above an induction cooktop. Key requirements (please read before responding): Existing cabinet opening ~60cm wide, ~29cm deep Mounting height ~640mm above cooktop Rangehood must be ducted and vented externally (air discharged outside the building) External venting to be achieved via roof cowl (not into ceiling or roof cavity) Ducting routed to south-facing roof to avoid existing solar panels Use 150mm rigid or smooth semi-rigid ducting with minimal bends Install backdraft damper / non-return valve so the system is sealed when off Existing cabinetry to be retained if possible Open to: Installer supplying the rangehood, or Installer fitting a hood I purchase separately (please specify). Please describe: Your experience with externally ducted rangehoods How you handle roof penetrations where solar panels are installed Ducting materials you use Photos of similar work welcome. Task includes removal and disposal of old range hood.

Tiling and waterproofing Shower base and walls 900 x 900

My rooftop evaporative cooler is not being effective so I think it needs a service/clean. Looking for someone that has experience with. evaporative coolers and working on a tiled roof without cracking tiles. Easy access to the roof, single story house. No fixed date but sooner the better.