Find experienced local roofers in Bondi Junction

Reinstall a soft cover tonnaeu cutting around the roof tub rack. Doesn’t matter if not perfectly waterproofed. Will have to cut into cover and reinstall the metal strips it grips to. Also lower the roof tent down one bolt as per photos. Finally if able to debage the badges shown in the photos. Bondi Junction can be done in basement car park.

Need to extend 2 x colorbond down pipes 1 x down pipe need to be extended longer to reach the roof 1 x down pipe need to be extended to the drainage which is right under tap under the deck 150mm depth Clean 2 x 4 meter gutters Check the flashing if requires sealing

Need paint removed from 3 copper downpipes. 2 storey home - I can supply large ladder

A small section of gutter pipe is rusted and need a replacement. Pipe can be reached by hand, no ladder needed.

I am renovating a tiny en-suite. I will likely need to dig up the existing tiled floor and screed, and have a new floor laid with a short channel drain. I will then need all the wall area tiled too. In order to quote correctly you will need to see the space. While here we will discuss the details of the project and materials that I will need to provide. To get the ball rolling I will pay you for your quote. You will be licensed as a waterproofed and have many years experience as a tiler who can handle fiddly detailed work.

4.5m black colourbond 110mm replacement ground floor semi call weekdays

Gutter clean, weed spray, clean up - View all the details of this offer: https://www.airtasker.com/offers/01KC2FJ0VWV2M5ZVWG76M4D45J

I am seeking a licensed professional to provide a formal quote for a complete kitchen extraction solution in a Strata unit. Please Note: This task is for the site visit and provision of a formal quote. Please indicate if there is a call-out fee. Work Scope: Range Hood Install: Installation of a customer-supplied range hood (already purchased). Exhaust System Supply & Install: Supply and installation of internal ducting from the range hood to the roof. Fireproofing: Ducting must be fireproofed/wrapped to AS 1668 compliance standards. Roof Component: Installation of a roof cowl/exhaust outlet and completion of associated roof repairs to ensure a waterproof finish. Requirements: Qualified: Licensed Roof Plumber or Mechanical Services contractor. Strata Ready: Must provide Certificate of Currency for Public Liability. Compliance: Able to provide a compliance certificate for fire safety once work is complete. I live on an apartment building built in late 80's 3 storey walk up. I live on the top floor. There is a manhole to access the inside of the roof. To access the outside of the roof I believe it must be by ground of common property.

Apply clear penetrating sealer to my concrete roof tiles and do ridge point recapping. It's a terrace and you will need to climb from the front. The tiled area of the roof is only around 5m x 5m, the rest is corrugated iron so doesn't need treatment. I am the terrace on the right, don't need to do anything for the green house. Roof has already been pressure washed as of october 30th please supply the sealer and mention what it is.

Remove old gutters and cut into max. 700mm lengths. I will arrange disposal. 1. 2050mm length, at 2.6m height. 2. Porch gutter 1070mm length, about 3m high. 3. Upper roof zig-zag shape, 400x1470x1360mm. No spout, only 1 stop end. About 4m high. Most of the materials are here; 115mm colorbond quad guttering, stop ends, spouts, brackets, silicone, 1 internal & 1 external angle for the zig-zag. You will need to supply rivets and galvanised screws for fixing.

Existing 90 cm Rangehood required to be replaced with new appliance (already purchased) I live on an apartment building built in late 80's 3 storey walk up. There is existing ducted ventillation which is ducted through the roof which I would like replaced entirely - so request is for complete removal of existing appliance and ducting, and replacement with new ducting and appliance. Not sure how the external roof is accessed, only know that there is a manhole to get into the roof cavity.

I need someone to clean our gutters and potentially also install 4 50mm drainpipe clips. We live in a old and small double level terrace with approx. 12-15m of gutters (see image). I'm offering $200 for gutters and $50 for clips. Let me know if you are interested asap. Thanks

Two story semi and garage with one easy to reach gutter - not a huge job, more about getting on the roof

We have a roof to repair below the existing solar system & heating We need it dismantled and removed prior to us replacing a few sheets below. We will need to solar system reconnected after works are completed.

The runroof fell from the roof We need to reattach it

I have some leaks in my roof. I haven't been able to climb up to inspect the roof itself. But the my ceiling has some damp spots, where I've drilled a hole to let it drain out. The house is a 2 storey terrace in bondi junction. The roof is half corrugated, half tiles. I think the leak is in the tiled area. I'm interested in two services. 1) Inspect the roof and apply a temporary fix if needed (E.g., tarp or sealant) 2) Quote for a proper repair The price I've outlined is for the inspection and the temp fix, but negotiable since we don't know what the issue is.

I need a Roofer to patch up 2 spots and clean the gutters. It’s 3 storey townhouse easy access to roof. One place needs to riveted or screwed and one place need some mesh put in a place so prevent anything go in the roof like birds etc. Job in 5min from city

Experienced metal roofer with car and tools to join team of an up and growing roofing business

When raining there is a leak in the gutter where a join occurs

Hi, Looking for a roofer for a day’s work. I have 3 Velux skylights and flashing kits. I’d like professionally installed into a pitched tiled roof. The skylights are fixed non-opening and I am available to help lift as needed. Day rate please. I will be sourcing a carpenter and gyprocker to tackle the light tunnel to the ceiling.